Overview
Multi-Function Strobe Controller with right and left outputs and 10 alternating dynamic strobe modes. LED indicator lights on controller demonstrate the mode selected. Power-cycle mode retention allows your light to return to the mode that was selected before it was powered off. Use for LED emergency, warning and hazard lights. 12-24VDC operation. 2 Amp max load. Mount using included double-sided adhesive. Price per unit
Specifications
MSC2-24W LED Multi-function
Strobe Controller
- Output Power: 24W(MAX.)
- Operating ambient temperature: 40 °C~ +50 °C
- Case Material & Size: (ABS(Black color) /46 * 28 * 14mm (L * W * H)
- Wire Length: 120cm (Input), 300cm (Output)
- Find a suitable interior mounting location for the controller that allows for convenient access to change modes when desired
- Wire controller outputs directly to desired LED lighting (maximum power consumption 12W per side/channel)
- To change modes quickly press and release the MODE button. TO power off the lights press and hold MODE for 2 seconds
- Supply voltage of this product is 12~24 Volts DC, do not exceed
- Shorting output wires my cause damage to amplifier
- Always observe proper polarity when connecting power and load
- For indoor use only - this product is not waterproof or weatherproof
Reviews
Overall Rating
Total Reviews
Tell Us What You Think
Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.
-
NameMike K.
-
Technical LevelAdvanced
-
Part NumberMSC2-24W
-
Reviewed On11/13/13
Very nice LED controller!
I too bought some LED strobes off Ebay, my biggest complaint was that the controller only had 3 modes and each time I powered it up I had to select a mode. This controller has 10 different modes and when powered off and turned back on it stays at your last pattern picked. VERY NICE! My only thing I don't like about it is that there is only one button that functions as a mode selector and on/off switch. A few times i went to change modes and just a quick tap was enough to turn it off. To turn it off your to push and hold the button for 2 sec's which wasn't that case. I will still give it 5 Stars for being so small in size, easy to hook up and having 10 patterns to choose from.
-
NameDan
-
Technical LevelAdvanced
-
Part NumberMSC2-24W
-
Reviewed On05/20/16
Great Controler
Perfect for my application. The size makes it easy to find a place to mount it. The flash patterns could be better, but I found one that works for me. I'll add some details I was wondering about prior to my purchase: 1) If you wish to use a separate switch to turn the controller on/off, you can do so. I wasn't sure if you would have to push the button on the controller every time power was applied. In other words, once the pattern is selected, you don't need access to it any more - it will come on and off with a separate switch. 2) The controller switches the positive leads and shares the negative ones. This was critical for me since had existing LEDs that shared their negatives.
-
NamePatrick
-
Technical LevelExpert
-
Part NumberMSC2-24W
-
Reviewed On07/14/14
-
NameAdam
-
Technical LevelAverage
-
Part NumberMSC2-24W
-
Reviewed On04/15/15
-
NameChristopher
-
Technical LevelAdvanced
-
Part NumberMSC2-24W
-
Reviewed On10/25/13
Works very well with honeycomb hideaways
I got led strobe kit off ebay lights are fine but flasher box failed 3 times .So sick of it i decided to try this product it runs the 5 i have in my truck very well.Flash patterns are nice on this unit gives extra brightness to my lights .Very happy so far with this purchase fast shipping ..Nice feature it has hazard type flash so it add little more attention in that mode .So if you need flasher box this great bang for your buck ..Oh thank you for the sticker nice little surprise
