Single Color Mini LED Dimmer w/ LC2 Connector - Wireless RF Remote - 5 Amps

Part Number: MCBRF-5ALC2
Discontinued
In Stock
$11.95 ea.
Volume price as low as $8.96
Orders Ship Today!  9 Hours and 15 Minutes remaining
Notes
  • Select options to see various notes.

Overview

This mini LED dimmer with wireless RF remote is perfect for operating your single-color LED light strips. The LED remote uses brightness +/- controls or 6 button shortcuts to dim light strips from 10%-100% using Pulse Width Modulation (PWM), and it controls your light strip from greater than 50' away in open air. Power-cycle mode retention allows your light strip to return to the mode that was selected before it was powered off. The dimmer has a maximum load capacity of 5 amps and is compatible with LED light strips that operate within a 5-24V DC range. A male LC2 locking connector easily plugs into the female connector on your light strip. Control an infinite number of receivers with 1 remote, and pair up to 3 remotes with one receiver. Includes remote battery.

Important Notes - Please read before purchasing:
Notes
  1. If LC2 connector is not used, Red is negative and Black is positive.
2 Years
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
FCC
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.
RoHS Compliant

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Single Color Mini LED Dimmer w/ LC2 Connector - Wireless RF Remote - 5 Amps - MCBRF-5ALC2
Functions
1: Turn On/ Standby
Press ‘I’ key to turn on unit or press ‘O’ key to turn off. Retains last setting between power off and power on.
2/3: Brightness Adjust
Press BRIGHT+ to increase brightness and press BRIGHT- to decrease brightness.
4: Brightness Shortcuts
Directly switch to 100%, 80%, 60%, 40%, 20% or 10% of full brightness.

remote

 Controller Installation & Remote Pairing Instructions 

Controller Installation
1: Power Supply Wiring
The main unit can work at DC 5V to 24V power supply. The red cable (or inner pole of DC jack) should be connected to positive and black cable (or outer pole of DC jack) to negative. Make sure the power supply voltage matches the LED strip requirement, incorrect voltage may damage strip.
2: LED Output Wiring
The red cable should be connected to LED positive and black cable to negative. Use LC2 male connector on controller to plug in female LC2 connector on LED strip. The peak output current is 5 amperes.
CAUTION! Do not short circuit or overload the LED outputs, this may lead to permanent damage!
remote

Remote Pairing
Using Remote Controller
Please remove the battery insulator before using. The remote uses a 3V CR2025 battery. The RF wireless remote signal can pass through barriers, so it's not necessary to aim at the main unit when operating. For proper receiving of the remote signal, please do not install the main unit in metal enclosures.
Pairing A New Remote
Up to 3 wireless remotes can be assigned to operate the LED controller. Additionally, each individual wireless remote can be assigned to an unlimited number of controllers. The following steps show how to assign a new remote to the LED Controller:
  1. Disconnect the power to the LED controller, wait 5 seconds, and reconnect.
  2. Within 5 seconds of reconnecting the LED Controller, press the “100%” and “60%” buttons simultaneously.
Free Remote Pairing Mode
  1. Disconnect the power to the LED controller, wait 5 seconds, and reconnect.
  2. Within 5 seconds of reconnecting the LED Controller, press the “ON/OFF” and “BRIGHT+” buttons simultaneously.
2 Years
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
FCC
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.
RoHS Compliant

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Specifications

Amps 5.00 Amps
Amps Per Channel 5 Amps/CH
Battery Type 1 x CR2025
Channels 1 Channel
Connection Type CPS Female, LC2 Male
Dim Control Remote Control
Dimensions
Input Voltage DC 5 ~ 24 VDC
Output Voltage DC 5~24 VDC
Radio Frequency 433.92 MHz
Remote Control Radio Frequency (RF)
Special Features Multi-Device Pairing, Strobe and Fade
Standards And Certifications FCC, RoHS Compliant
Type Dimmers, Remote Control, Single Color Dimmer
Volts 5~24 VDC
   
Package Weight: 1.5oz (0.04kg)
Package Dimensions: 4" (10cm) x 2.75" (7cm) x 0.6" (2cm)
All specifications are subject to change without notice.
MCBRF-5ALC2 - Single Color Mini LED Dimmer w/ LC2 Connector - Wireless RF Remote - 5 Amps
Single Color Mini LED Dimmer w/ LC2 Connector - Wireless RF Remote - 5 Amps

Accessories & Power Supplies

Reviews

Overall Rating

Total Reviews

5

Tell Us What You Think

Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.

Sign In Required to Write a Review
Click here to sign in to your account
  • Name
    Calusa
  • Technical Level
    Average
  • Part Number
    MCBRF-5ALC2
  • Reviewed On
    04/19/17

This is a great controller at a great price.

I really love this controller/dimmer. In fact I liked the first one so much that I bought a second one so that I could control LED light strips in two separate areas of my boat’s center console.
I like the fact that these controllers and their remotes operate independently of one another and that each unit comes from the factory paired with it’s remote.
There is a great range of illumination from bright to dim and when I power the units down they retain the last brightness setting. I like the fact that there are a number of brightness pre sets from 100% to 10%.
Having connectors in place is a nice feature, however I chose to remove the connectors on the input and output wires and in place of them used heat shrink butt connectors. IMHO this offered a less bulky connection that was more appropriate to a marine environment.

Was this review helpful?
10

  • Name
    Stephen
  • Technical Level
    Advanced
  • Part Number
    MCBRF-5ALC2
  • Reviewed On
    08/11/16

Nice little dimmer. Easy to add dimming without a

This works well with LED strips. The presets of 100% to 10% plus '+' and '-' give a lot of flexibility. The small size makes it easy to mount next to the strips. I've now used a few and they all work.

Was this review helpful?
00

  • Name
    oscar
  • Technical Level
    Advanced
  • Part Number
    MCBRF-5ALC2
  • Reviewed On
    05/02/16

Perfect for my project

Good and easy installation.

Was this review helpful?
00

  • Name
    William K
  • Technical Level
    Average
  • Part Number
    MCBRF-5ALC2
  • Reviewed On
    09/29/16

Awesome

Love it. The remote is small the device even smaller. It was very easy to hook up Gave me just the look I was going for.

Was this review helpful?
00

  • Name
    Steve
  • Technical Level
    Expert
  • Part Number
    MCBRF-5ALC2
  • Reviewed On
    01/26/17

Nice Unit

Very easy to pair with remote

Was this review helpful?
00


Send us your Feedback