T22 LED Replacement Bulb for WB36X10003 and other Microwave Light Bulbs - 225 Lumens

Name: T22 LED Replacement Bulb for WB36X10003 and other Microwave Light Bulbs - 225 Lumens
Brand: Super Bright LEDs
SKU: T22D-x2DF-E17
Price: 3.99 USD
Availability: InStock
Rating: 4.5 (130 reviews)

Part Number

T22D-x2DF-E17

Rating:
90% of 100

130 Reviews Add Your Review

Free Shipping

On orders $300 and up within the contiguous U.S.
Read More

Item does not qualify

Add to Wish List

Skip to the end of the images gallery

8 photos

Skip to the beginning of the images gallery

Overview

Description

This LED replacement bulb is perfect for replacing commonly used WB36X10003 bulbs and other microwave light bulbs with E17 bases. The T22 bulb has 4 linear filament COB (chips-on-board) LEDs that are designed to run cooler than traditional LED types. LEDs emit up to 225 lumens of white illumination. The energy-efficient microwave bulb uses just 2 watts of power; an incandescent bulb with comparable light output would consume 20 to 25 watts. This bulb operates with in a wide 110-130V AC range and is designed to last 30,000 hours—25 times longer than incandescent bulbs.

Super Bright LEDs, Inc. offers a 3-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More

Specifications

Ambient Operating Temperature	-10~+45 °C (14~+113 °F)
Base Type	E17 (Intermediate Screw)
Beam Angle Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.	360°
Brand	Super Bright LEDs
Bulb Type	Decorative Filament, T22
CRI	80+
Current Draw	20 mA
Dimmable	Yes
Dimming Type TRIAC Dimming: Triode for alternating current (TRIAC) dimming is used to control high-voltage dimmable power supplies such as Magnitude Dimmable Power Supplies. These dimmable power supplies work by varying the power on the AC input side of the power supply by means of a TRIAC dimmer. This change in power on the AC input side will vary the voltage on the DC output side and control the intensity of the LEDs. TRIAC dimmers are common hardware store and household dimmers, which include brand names such as Lutron and Leviton. Pulse-Width Modulation Dimming: Pulse-width modulation (PWM) dimming can be used to control dimmable power supplies such as Mean Well HLG Series and Mean Well LPF Series. This type of dimming control adjusts the output current based on the duty cycle. As the duty cycle increases, current will increase and the LEDs will be brighter. Conversely, if the duty cycle decreases, the current will decrease and the LEDs will be dimmer. Pulse-width modulation for these drivers is based on a 10V signal level with a frequency between 100Hz~3KHz. The MCBRF-4A or MLD-5A are compatible for this application. Resistive Dimming: Resistive dimming can be used to control dimmable power supplies such as Mean Well HLG Series. The resistance can be fixed or variable. If a fixed level of dimming is required, a simple resistor is all that is needed to dim the LEDs to a particular level. If a varying dimmable level is desired, a potentiometer can serve this purpose. By changing the resistance value of the potentiometer, the output current of the power supply changes, and the LED intensity changes. Controlling a single power supply will require a 100K ohm potentiometer for 100% intensity (100K ohm) to approximately 10% intensity (10K ohm) based on where the wiper is positioned. 1-10V Dimming: 1-10V dimming can be used to control dimmable power supplies such as 12V Mean Well HLG-40~240 Series or 24V Mean Well HLG-40~240 Series. This type of dimming control is an older style for compatible dimmable power supplies and is being replaced with 0-10V dimmer control. 1-10V dimming control works by varying the voltage from 1-10 VDC. A 10-volt signal on the dimming wire will allow for maximum current to flow to the LEDs for maximum intensity. A 1-volt signal on the dimming wire allows 10% of the current to flow from the power supply, which generates approximately 10% of the maximum intensity for the LEDs. 0-10V Dimming: 0-10V dimming can be used to control dimmable power supplies such as 12V Mean Well HLG-600 Series or 24V Mean Well HLG-600 Series. This type of dimming control is the most popular and newest style for compatible dimmable power supplies. 0-10V dimming control works by varying the voltage from 0-10 VDC. A 10-volt signal on the dimming wire will allow for maximum current to flow to the LEDs for maximum intensity. A 0.6-volt signal on the dimming wires allows 6% of the current to flow from the power supplyâ€”dimming the LEDs to approximately 6% of full intensity. 0-10V dimmers can be found here.	TRIAC
Environmental Rating	Non-weatherproof
Equivalency	25 Watt Incandescent
IP Rating .	IP20
LED Lifetime	30000 Hours
Lens Color	Clear
Operating Voltage	120 VAC
Power Consumption	2 Watts
Reference Number	E17 (Intermediate)
Warranty	3 Year

Print Specifications

Part NO	LED Color	Lumen
T22D-NW2DF-E17	Natural 4000K	225 Lumens
T22D-WW2DF-E17	Warm 2500K	205 Lumens

Accessories & Power Supplies

Reviews

90%

4.5 / 5 stars

130 reviews

Customer Submitted Photos

Write Your Own Review

Write a Review

You're reviewing: T22 LED Replacement Bulb for WB36X10003 and other Microwave Light Bulbs - 225 Lumens

Select Product

Select Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Email Address

Summary

Review

Technical Level

Add your photo

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

Review text does not pertain to the product
Abusive and offensive language
Photos are not related to the reviewed product
Any violation of laws and/or copyrighted material
Unrelated hyperlinks/URLs