Round LED Truck and Trailer Lights w/ Grommet - 3/4” PC Rated LED Side Clearance Light - Bullet Connector - Recessed Mount - 1 LED

Part Number: RMPC-x
17 photos
Select LED Color:
Colors
RedAmber
Discontinued
Various Options In Stock
$4.95 ea.
Volume price as low as $3.71
Orders ship on or before  Monday 07/23/2018
Notes
  • Select options to see various notes.

Overview

This 3/4” mini round LED light is PC rated and meets DOT FMVSS 108 requirements for use as clearance lights and side marker lights. The lights flush mount with attached grommet. Each light boasts 1 high-flux LED that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in red and amber. Lifetime warranty on all truck/trailer lights.

Lifetime
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
DOT
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
SAE
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
CE
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
RoHS Compliant

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Round LED Truck and Trailer Lights w/ Grommet - 3/4” PC Rated LED Side Clearance Light - Bullet Connector - Recessed Mount - 1 LED - RMPC-x
Applications

The RMPC-x has an operating voltage range of 9~14.8 VDC
Operating Voltage Range
9~14.8 VDC

Sealed Housing
Water and Dust Proof Housing

Lifetime
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
DOT
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
SAE
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
CE
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
RoHS Compliant

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Specifications

Connector Type Bullet
Current Draw 60mA
DOT/SAE ID Code DOT (SAE PC P2)
Dimensions
IP Rating Waterproof IP67
LED Type 3mm High Flux
Mount Type Grommet
Number of LEDs in Unit 1 LED
PC Rating[1] Yes
SAE Lighting ID Codes P2, PC
Standards And Certifications CE, DOT, RoHS Compliant, SAE
Total Wire Length 4in(10.1cm)
Volts 9~14.8 VDC
   
Stock Numbers: 33250r, 33250y, 33275r, 33275y, 81110, 81112, 81129, 81443
Package Weight: 0.9oz (0.03kg)
Package Dimensions: 3.94" (10cm) x 1.15" (3cm) x 1.15" (3cm)
All specifications are subject to change without notice.
1. 
Swipe left to see additional specifications
Image (On)Part NOCCT / Wavelength
IntensityCurrent Draw @ 12 Volts DC
SubmersiblePrice Ea.
RMPC-R--60 mA-$4.95
RMPC-A--0.060 A
(60 mA)
-$4.95
RMPC-x - Mini Round LED Truck Trailer Light - 3/4" PC Rated LED Marker Clearance Light with 1 LED
Mini Round LED Truck Trailer Light - 3/4" PC Rated LED Marker Clearance Light with 1 LED

Accessories

Reviews

Overall Rating

Total Reviews

6

Tell Us What You Think

Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.

Sign In Required to Write a Review
Click here to sign in to your account
  • Name
    Dave
  • Technical Level
    Average
  • Part Number
    RMPC-A
  • Reviewed On
    03/16/13

Used on trailer

I used this as a side marker - flasher when backing trailer up. Works great with the led-strobe module.

Was this review helpful?
164

  • Name
    Kevin
  • Technical Level
    Advanced
  • Part Number
    RMPC-A
  • Reviewed On
    02/05/15

Possible Jeep Turn Signal

They're fairly bright, compact, and could make decent turn signals for a project. They are bright from the front, but not as bright from the side. I also ordered the RMPC-A-LP which seemed to be brighter and gave better light at all viewing angles. Those are the ones I will use.

One IMPORTANT note - both of the ones I received had the wiring backwards from everything else I've ever seen. Typically black denotes ground, and any other color would be the positive. I originally set it up that way, but it didn't work. After swapping, with the white to ground and the black to positive, they worked fine. I ordered two of these and 2 of the RMPC-A-LP and all 4 were wired the same.

Was this review helpful?
61

  • Name
    Robert
  • Technical Level
    Advanced
  • Part Number
    RMPC-A
  • Reviewed On
    04/28/15

Excellent LED Marker Light

Installed this light into my new front fenders as marker lights. Clean install and connections. Very bright and works great

Was this review helpful?
30

  • Name
    John
  • Technical Level
    Average
  • Part Number
    RMPC-A
  • Reviewed On
    08/23/15

Nice highlight on my Super Duty

I bought five of these mini LED round amber lights and put them on the lower front valance on my F250 Super Duty two years ago. I'm a little surprised that one burnt out. But they look cool and a nice highlight to my truck. I bought two more in case another one fails. I have to have extras now because they will always be a look of the truck. I'll still give it five stars.

Was this review helpful?
20

  • Name
    Michael
  • Technical Level
    Expert
  • Part Number
    RMPC-A
  • Reviewed On
    06/24/17

Tough and Bright

These LEDs were bought to do my own blinker set up on my SxS. I am very happy with my purchase.

Was this review helpful?
00


Send us your Feedback