Wireless Remote Control Switches with Key Fobs for Wire Harness Pairs
Part Number: RCS-RF (pair)
9 photos
In Stock
$33.95
per Pair
Volume price as low as $13.58
Orders Ship Today! 12 Hours and 18 Minutes remaining
View More
Overview
Specifically for dual beam or dual color light bars or work lights. Wireless Remote Control System for 12VDC LED products. Control your LED light strip, LED light bar, off road LED light bar or LED work light wirelessly with just a touch of a button. Features 11 strobing modes. Includes 2 RF receivers and 2 brushed aluminum key fobs. 1.35A total maximum load, 100ft (30m) remote signal range.For use with our wiring harness pair.
Warranties & Certifications
Installation
- Unplug supplied switch from the harness by pressing on the locking tab and releasing the two halves of the connector.
- Plug RCS-RF in between switch and harness, being sure to note the orientation of the locking tab.
- Make sure both halves of connector are fully seated and locked together.
Pairing Remote & Receiver
- Complete wiring installation of the light you wish to use.
- Press the pairing on top of the RCS-RF receiver and release. The light will flash twice.
- Press any button on the remote within five seconds, the light will flash three times indicating the pairing is complete.
- To erase the pairing from memory simply press and hold the programming button on the RCS-RF until the light flashes five times.
Remote Control Buttons
| Button A | On / Off |
| Button C | Mode Advance Backward |
| Button B | Mode Advance Forward |
| Button D | SOS Mode |
Remote Strobe Modes
| Button A | Static On/Off Mode (No Flashing) | Button B~C | Three Quick Flashes Pause Mode ((On 40ms + Off 40ms)x3 + Off 240ms) |
| Forty One Quick Flashes, Ten Long Flashes ((On 40ms + Off 40ms)x41 + (On 300ms + Off 300ms)x10) | |
| Short Alternating Flash Mode (On 250ms + Off 250ms) | |
| ON/Off/On Pause Mode (On 150ms + Off 150ms + On 150ms + Off 650ms) | |
| Medium Alternating Flash Mode (On 330ms + Off 330ms) | |
| Decreasing Speed Flash Mode (( On 40ms + Off 40ms) + (On 42ms +Off 42ms) +(On 44ms +Off 44ms) + … + (On 398ms + Off 400ms)) | |
| Long Alternating Flash Mode (On 500ms + Off 500ms) | |
| Increasing Speed Flash Mode (( On 400ms + Off 398ms) + ( On 396ms + Off 394ms) + … + (On 42ms + Off 40ms)) | |
| Additive Flashing Mode ((On 40ms + Off 40ms)x1 + Off 460ms + (On 40ms + Off 40ms)x2 + Off 460ms + (On 40ms + Off 40ms)x3 + Off 460ms + …… + (On 40ms + Off 40ms)x10 + Off 460ms) | |
| Button D | SOS Mode On/Off ((On 200ms + Off 200ms)x3 + Off 300ms + (On 400ms + Off 200ms)x3 + Off 300ms + (On 200ms + Off 200ms) x3 + Off 1100ms) |
View More
Specifications
Amps
1.35 Amps
Amps per Channel
1.35 Amps/CH
Battery Type
1 x 27A
Channels
1
Channels
1 Channel
Connector Type
3-Pin
Dimensions
Input Voltage DC
12 VDC
Max Load
1.35A
Special Features
Remote Control
Standards And Certifications
RoHS Compliant
Package Weight: 3.8oz (0.11kg)
Package Dimensions: 3.2" (8cm) x 1.93" (5cm) x 1.87" (5cm)
All specifications are subject to change without notice.
For use with switch harness: WH-DTS10 (pair)
RCS-RF Installation Instructions
View More
Accessories
View More
Reviews
Overall Rating
Total Reviews
1
Tell Us What You Think
Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.
