store image

Wireless RGBW Touch LED Dimmer Switch for EZ Dimmer Controller

Part Number: EZD-RGBW3-WM
In Stock
$64.95 ea.
Volume price as low as $58.45
Orders Ship Today!  5 Hours and 12 Minutes remaining
  • Select options to see various notes.


Designed for use with the Wireless LED 4-Channel EZ Dimmer Receiver and as a DMX controller, this wireless RGBW LED dimmer switch fits in standard wall switch boxes and provides on/off control as well as fixed levels of dimmability. The dimmer switch has a color-selection wheel for thousands of color options, 10 dynamic color-changing/single color modes, 0-100% dimming, on/off controls, and 4 color-specific channel controls for red, green, blue, and white. The dimmer transmits an RF signal to the wireless receiver from up to 300' away in open air. The wireless dimmer includes 2 mounting screws.

3 Years
Super Bright LEDs, Inc. offers a 3-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.
EZ Dimmer
Parts Included & Installation Instructions

 Installation Instructions & Remote Functions 

Set-Up Instructions
  1. Follow illustrated steps in the instruction sheet to connect Wall Switch to Power Supply. Connect GND terminal to negative and connect VIn to positive from power supply.
  1. Make sure power to the controller is disconnected.
  2. Using a small flathead screwdriver, loosen the labeled terminal screws visible on the top of the controller.
  3. Matching light strip wires with labeled slots on the Controller, insert wires and tighten terminal screws. Be sure wire conductor, not wire insulation, is secured in terminal.
  4. Turn power on and wait until light strip illuminates. If it does not come on, check light strips and wiring connections.
  • DO NOT install with power applied to controller.
  • DO NOT expose the Wall Switch or Controller to moisture.
Wall Switch Instructions
  1. Release Wall Switch control panel from Back Plate by separating at notch on bottom of Wall Switch and pivoting away from locking tabs on top of Wall Switch.
  2. Connect the wiring from the Wall Switch to the Power Supply as the diagram shown to the right. Optionally, connect wired DMX control signal to DMX controllers.
  3. Fasten wall switch to existing switch box using supplied Screws.
  4. Align locking tabs on top of Wall Switch Control Panel to Back Plate and pivot Control panel towards Back Plate being sure all locking tabs engage fully.
Remote Functions


EZD-RGBW3-WM - Wireless RGBW Touch LED Dimmer Switch for Easy Dimmer Receiver
Wireless RGBW Touch LED Dimmer Switch for Easy Dimmer Receiver



Overall Rating

Total Reviews


Tell Us What You Think

Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.

Sign In Required to Write a Review
Click here to sign in to your account
Technical Level
Part Number
Reviewed On

Very Basic and Lacks Desired Functions

The controller is in a great case and would normally be a good choice for a wall unit. But the dimming is very basic and the color wheel only controls the RGB and not the White LEDs. There is no memory so favorite colors cannot be saved. Overall, the functionality is a terrible design.

Helpful? Yes (0) No (0)

Response from Super Bright LEDs:

That controller can control the white function. Our Technical Support team can work with you in finding a solution for your application.

Technical Level
Part Number
Reviewed On

Good Product .

Works great. Was easy to pair. Will not dim white channel if your using with RGB+W leds . Overall good product .

Helpful? Yes (0) No (0)

Technical Level
Part Number
Reviewed On

Works as advertised.
Wish it had a direct connect rather than remote link to the controller.
Easy to install once you get the courage to pop the cover off - thought I was going to break it...

Helpful? Yes (0) No (0)

Send us your Feedback