RGB LED Controller with Wireless RF Remote - Dynamic Color-Changing Modes - 4 Amps/Channel

Part Number: RGB-CA12
6 photos
Discontinued
Clearance
Was $19.88
Now $14.88 / set
Volume price as low as $11.16
Orders ship on or before  Monday 08/20/2018
Notes
  • Select options to see various notes.

Overview

Universal Red/Green/Blue (RGB) LED Controller with handheld RF Remote can control any 12VDC RGB LED products. Select 1 of 7 Static Modes or 1-4 Dynamic Color-Changing Modes with Speed and ON/OFF controls. Drives up to 30 meters of our xFLS-RGB light strips, for longer runs use optional RGB amplifiers.

Important Notes - Please read before purchasing:
Notes
  1. Do not use amplifier until max run of RGB Controller or RGB Amplifier is met.
2 Years
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
RoHS Compliant

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

RGB LED Controller with Wireless RF Remote - Dynamic Color-Changing Modes - 4 Amps/Channel - RGB-CA12
The Model RGB-CA12 is used to control 12 Volt RGB LED Light Bars and Light Strips with common anode wiring, such as our FLS-RGB series Light Strip. Using the included hand held wireless remote control, RGB Light Strips can be set to one of seven different static colors or one of four different flashing patterns. The remote control can also adjust pattern speed and turn system ON and OFF. With 12 Amp continous load capability, the RGB-CA12 can drive up to 30 meters of our FLS-RGB Light Strips. For longer runs use our RGB Amplifiers
Notes
  • Only power with 12VDC Power Supply and connect to 12 Volt Light Strips or unit will be damaged. Our Compact 50Watt and 24 Watt Power Supplies will plug into DC IN jack on left side of unit. Our Enclosed Power Supplies can be direct wired to "+" and "-" terminals on removable Green connector on right side of unit.
  • Wireless controller uses one 23A, 12V battery.
  • Connect according to the above drawing and note that the Green Connectors can be unplugged from the unit.
  • Red LED will come on when unit is receiving power, Green LED will flash when RF signal is received from handheld transmitter.
  • UP and DOWN buttons will only work when unit is in one of the four color-changing (dynamic) modes.
  • One Remote can operate multiple Controllers.
  • Controller can control a maximum of 30 meters of our Flexible RGB LED Strip. Over 30 meters, the Strips have to connect with an amplifier to reinforce the transmission of signal. Use one RGB Amplifier for every 30 meters of additional LED Strips.
  • Do not exceed 80% of Power Supply capacity when calculating Power Supply size to use in your system.
  • Not suitable for automobile applications
Static & Dynamic Color Modes
1 Static Red 2 Static Green
3 Static Red / Green Mix = Yellow 4 Static Blue
5 Static Red / Blue Mix = Violet 6 Static Green / Blue Mix = Aqua
7 Static R/G/B Mix = White 8 Cycles through Red-Green-Blue
9 Cycles through all color combinations 10 Cycles through Red-Green-Blue fading in and out
11 Cycles through all color combinations fading in and out
Remote Control
A Cycles through 11 operating Modes static followed by 4 dynamic
B Speeds up color-changing patterns Green Signal LED on unit will flash when pressed until maximum speed is reached. Can be single pressed to step up speed or held down to speed up rapidly.
C Slows down color-changing patterns. Functions same as UP button for slowing patterns change rate.
D Use to turn all connected Light Bars On and Off last operating mode resumes when turned on.
diagram
2 Years
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
RoHS Compliant

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Specifications

Product Specifications
Applications Specific color selection or color change with speed control modes for accent lighting
Function Control 3 channel RGB LED products using wireless remote
Operating Voltage 12 Volts DC
Connection Mode Common Anode (+)
Output Three CMOS output RGB
Maximum Load Current: 4 Amps/channel (12 Amps total)
Output Power 144 Watts
Overall Size (L)127 X (W)65 X (H)25 mm
Control Method 4 button wireless RF Remote Control
Batteries Required 23A, 12V battery for Remote (included)
Modes 11 total (7 static and 4 dynamic) see desc. below
Operating Temperature -25~60°C

Accessories & Power Supplies

Reviews

Overall Rating

There are no reviews for this product yet.

Total Reviews

0

Tell Us What You Think

Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.

Sign In Required to Write a Review
Click here to sign in to your account

Send us your Feedback