MiLight WiFi Smart RGB Controller with Touch Remote - 6 Amps/Channel
Overview
Universal Red/Green/Blue (RGB) LED WiFi Compatible Controller & Dimmer with hand held RF Touch Color Remote (Requires 2 "AAA" batteries -- Not Included). Can control any 12VDC RGB LED product within range of about 100 feet. Synchronization function allows a single remote to operate one or multiple controllers (User configurable). Color selection wheel provides thousands of color options from pure white mode or 19 dynamic color-changing modes with speed, brightness and ON/OFF controls. Maximum load is 6 amps per channel, 18 amps total. Must be paired with Wi-Fi LED Controller Hub (WIFI-CON -- Sold separately) for adjusting all controller functions using a Smartphone or tablet running Android or iOS using the free MiLight 3.0 app.
- Accent Lighting
- Home Lighting
- Remote Controlled Light
View All
View All
View All
Specifications
- 1 - 2.4Ghz Wi-Fi Compatable RGB Controller
- 1 - 2.4Ghz Sync-able RF Touch Color Remote
-
LDRF-RGB6-TC4 Manual
LDRF-RGB6-TC4 Manual
Installation And Usage Guide
button once.
- Remove strip from reel and make connections to power supply and controller (see "Method 1" diagram). Briefly turn on strip using the included remote controller to ensure proper operation of the strip, power supply, controller, and remote.
- Choose your desired yet suitable location for the power supply and controller. For use in dry locations only.
- Ensure all installation surfaces are clean and dry.
- Begin to remove strip’s backing while adhering to desired mounting surface. Press firmly to secure strips to surface. Mount controller and power supply to desired location.
- DO NOT connect controller or strips directly to 120 VAC power. This controller requires a 12 or 24 VDC power supply.
- DO NOT exeec max load of 18 Amps, overloading the controller may cause overheating, shorting, and possibly failure of controller.
- Be sure the power supply is not plugged into an outlet before connecting or disconnecting any of the systems components.
- Indoor Installation Only
- Always observe proper polarity when connecting power and load.
Wiring Method
| Mode | Function | Brightness | Speed Controls |
|---|---|---|---|
| 1 | Static White | ||
| 2 | White fade on and off | ||
| 3 | 7-color fade | ||
| 4 | Tri-color crossfade | ||
| 5 | 7-color instant change | ||
| 6 | Tri-color instant change | ||
| 7 | Red/Green instant change | ||
| 8 | Red/Blue instant change | ||
| 9 | Blue/Green instant change | ||
| 10 | White strobe | ||
| 11 | White flash strobe | ||
| 12 | Red strobe | ||
| 13 | Red flash strobe | ||
| 14 | Green strobe | ||
| 15 | Green flash strobe | ||
| 16 | Blue strobe | ||
| 17 | Blue flash strobe | ||
| 18 | Yellow strobe | ||
| 19 | Yellow flash strobe | ||
| 20 | Random |
Accessories & Power Supplies
Reviews
Overall Rating
Total Reviews
Tell Us What You Think
Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.
-
NamePaul
-
Technical LevelExpert
-
Part NumberLDRF-RGB6-TC4
-
Reviewed On03/30/15
LED Controller and Remote
Nicely packaged, compact, and performs as advertised. However the sensitivity on the remote touch switches is quite a bit more sensitive than I would like. Haven't verified the 6 amp output per channel on the controller, but is really great. My application only requires about 2 amps per channel. No problem with the range specification and have had no problem with RF interference.
-
NameAnonymous
-
Technical LevelExpert
-
Part NumberLDRF-RGB6-TC4
-
Reviewed On08/10/17
no power supply
no power supply so you can't use it. make sure you spend even more money on a power supply for something that should come with a power supply.
Staff
Response
Power supplies are chosen based on the amount of strip to be powered. Until you determine the power requirements, you can not correctly chose an appropriate power supply.
