store image

MiBoxer WiFi Smart Multi Zone RGB Controller with Touch Remote - 6 Amps/Channel

Part Number: LDRF-RGB-MZ
In Stock
$34.90 ea.
Volume price as low as $31.41
Orders Ship Today!  5 Hours and 28 Minutes remaining
  • Select options to see various notes.


Universal multi-zone Red/Green/Blue (RGB) LED WiFi Compatible Controller & Dimmer with hand held RF Touch Color Remote (Requires 2 "AAA" batteries -- Not Included). Can control up to four separate "zones" of RGB lights to be linked and controlled by one wireless remote. Synchronization function allows a single remote to operate one or multiple controllers (User configurable). Color selection wheel provides thousands of color options and 9 dynamic color-changing modes with speed, brightness and ON/OFF controls. Maximum load is 6 amps per channel, 18 amps total. Must be paired with Wi-Fi LED Controller Hub (WIFI-CON -- Sold separately) for adjusting all controller functions using a Smartphone or tablet running Android or iOS using the free MiBoxer app.

Please note: MiLight and MiBoxer are compatible smart technology brands. Products under these names are able to work interchangeably with each other.

2 Years
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.
  • Home Lighting
  • Home Accent Lighting
  • Remote Controlled Light


 Remote Pairing & Installation Options 

Wireless Remote
1. Master On(-)/Off(O)
A master On(-)/Off(O) control for all zone-linked RGB(W) light strips. Also activates the “Master” function, which allows the remote to control the RGB(W) light strips of all zones. If a zone is currently active, pressing the master On(-) button restores the “Master” function to the remote.
2. Color Selection Ring
Directly selects color along a circular spectrum. To obtain white light only, keep the “Zone On” (|) button depressed until the light changes to a steady bright white.
3. Selection LED Indicator
Flashes once to indicate when a command has been selected.
4. Brightness Touch Slider - Increase(Right Side)/Decrease(Left Side)
Increases(right side) or decreases(left side) the brightness level. Changing the active mode resets the brightness level to full.
5. Mode Start/Scroll(M)
Modes feature different color combinations, light transitions, and patterns, with 9 distinct modes. This button initiates the Mode function and scrolls through the modes in ascending order.
6. Mode Speed - Increase(S+)/Decrease(S-)
Increases (S+)/decreases(S-) the tempo of the mode pattern currently active.
7. Zone On(|)/Off(O) - Zones 1-4
Allows up to four “zones” (i.e. channels) of RGB(W) light strips to be separately linked and controlled by the remote. Pressing one of the Zone On(|) buttons activates that zone; commands will affect only lights in that zone. Once linked to a zone, lights remain linked until they are unlinked. Steadily depressing the Zone On(|) button restores the lights in that zone to white
Modes List
Mode Description
1 RGBW Fade In/Out Red, green, blue and white fade in/out in a set cycle.
2 Color Flash Red, green, blue, white, purple and yellow flash in
3 Disco Red, green, blue, white, purple and yellow cycle in rotation with flashing transitions
4 Red Fade in & Flash Red brightens to full brightness, then flashes 3 times
5 Green Fade in & Flash Green brightens to full brightness, then flashes 3 times
6 Blue Fade in & Flash Blue brightens to full brightness, then flashes 3 times
7 Color Fade In/Out & Flash Multiple colors fade in/out and then flash randomly
8 3 Color Change with Fade In/Out Multiple colors cycle with 3 smooth color changes followed by fade in/out
9 White Fade In/Out White flashes continuously

Set-Up Instructions
1. Install 2 AAA batteries (not included) in the wireless remote.
1. Make sure power to the controller is disconnected.
2. Using a small flathead screwdriver, loosen the five clamp screws on the underside of the controller.
3. Matching light strip wires to the labeled slots on the end of the controller, insert wires and tighten clamp screws, as shown below.
4. Turn power on and wait until RGB(W) light strip illuminates. If no illumination occurs, check light strips and wiring connections.
5. The RGB(W) light strip is ready for linking to the wireless remote.
  • DO NOT use with wall dimmers, relays or other control circuits.
  • DO NOT install with power applied to controller.
  • DO NOT expose the remote or controller to direct or indirect moisture.

Linking Lights to Remote Zones
RGB(W) light strips are controlled exclusively by the multi-zone RF remote via the controller
Linking a Light to the Remote
1.  Switch off the main power supply to the light.
2.  Restore power and within 3 seconds, choosing one of the “Zone On” (|) buttons, depress the button until the light begins flashing. It will flash white 2 times, indicating that the light is now linked to that numbered zone and can be controlled via the remote.
Activating a Zone
To activate a specific zone, depress the “Zone On” (|) button. The zone is now active and remote commands will only affect lights linked to that zone.
Unlinking a Light to the Remote
1.  Determine which zone the light is linked to. This can be done by testing the Zone On/Off controls for each zone on the remote.
2.  Switch off the main power supply to the light.
3.  Restore power and within 3 seconds, depress one of the “Zone On” (|) buttons until the light flashes 10 times, indicating that the light has been unlinked.
An unlimited number of RGB(W) light strips can be linked to a zone. All the lights linked to that zone will display the commands entered on the wireless remote. Conversely, a single RGB(W) light strip can be linked to multiple remotes. When the light is unlinkedv, it will be unlinked to all remotes. Note: The wireless remote operates using radio frequency. The remote controller’s use is not restricted by normal obstructions such as walls, doors, etc. Once programmed they can be installed anywhere in range of the remote (up to 65 ft. or 20m).
LDRF-RGB-MZ - Smartphone or Tablet WiFi Compatible RGB Multi Zone Controller w/ RF Remote - Dynamic Color-Changing Modes
Smartphone or Tablet WiFi Compatible RGB Multi Zone Controller w/ RF Remote - Dynamic Color-Changing Modes

Accessories & Power Supplies


Overall Rating

Total Reviews


Tell Us What You Think

Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.

Sign In Required to Write a Review
Click here to sign in to your account
Technical Level
Part Number
Reviewed On

Great remote

I was looking for a RF remote to control my deck lighting when I came across this one. I wanted to keep my controller out of site and this setup lets me do that. I have not installed the system yet but I have tested it and it works flawlessly. The remote is very sensitive and easy to use. I plan to purchase the WiFi controller to be able to use my phone to control my lighting.

Helpful? Yes (1) No (0)

Technical Level
Part Number
Reviewed On

Technical Level
Part Number
Reviewed On

Great controller, remote could be better.

The controller itself is convenient and simple but the remote doesn't allow for an effective granular color control. Note that the technical assistance from SuperBright was fantastic, so of the friendliest and helpful people I've had an opportunity to work with.

Helpful? Yes (0) No (0)

Technical Level
Part Number
Reviewed On

Good Product

Good Product

Helpful? Yes (0) No (0)

Technical Level
Part Number
Reviewed On

Awesome, would buy again. Made my liquor bottles pop

Helpful? Yes (0) No (0)

Send us your Feedback