Same Day Shipping
Super Bright LEDs warehouses are centrally located in the U.S. If your order is placed Monday through Friday before 3 p.m CDT, we will ship it that day. If you find that you need to return or exchange a product, we offer hassle-free 30 day returns and exchanges inside and outside of the U.S.
MiBoxer WiFi Smart Multi Zone RGB Controller with Touch Remote - 6 Amps/Channel
Overview
Universal multi-zone Red/Green/Blue (RGB) LED WiFi Compatible Controller & Dimmer with hand held RF Touch Color Remote (Requires 2 "AAA" batteries -- Not Included). Can control up to four separate "zones" of RGB lights to be linked and controlled by one wireless remote. Synchronization function allows a single remote to operate one or multiple controllers (User configurable). Color selection wheel provides thousands of color options and 9 dynamic color-changing modes with speed, brightness and ON/OFF controls. Maximum load is 6 amps per channel, 18 amps total. Must be paired with Wi-Fi LED Controller Hub (WIFI-CON -- Sold separately) for adjusting all controller functions using a Smartphone or tablet running Android or iOS using the free MiBoxer app.
Please note: MiLight and MiBoxer are compatible smart technology brands. Products under these names are able to work interchangeably with each other.
- Home Lighting
- Home Accent Lighting
- Remote Controlled Light
View All
View All
View All
Specifications
Installation Instructions ManualRemote Pairing & Installation Options
A master On(-)/Off(O) control for all zone-linked RGB(W) light strips. Also activates the “Master” function, which allows the remote to control the RGB(W) light strips of all zones. If a zone is currently active, pressing the master On(-) button restores the “Master” function to the remote.
Directly selects color along a circular spectrum. To obtain white light only, keep the “Zone On” (|) button depressed until the light changes to a steady bright white.
Flashes once to indicate when a command has been selected.
Increases(right side) or decreases(left side) the brightness level. Changing the active mode resets the brightness level to full.
Modes feature different color combinations, light transitions, and patterns, with 9 distinct modes. This button initiates the Mode function and scrolls through the modes in ascending order.
Increases (S+)/decreases(S-) the tempo of the mode pattern currently active.
Allows up to four “zones” (i.e. channels) of RGB(W) light strips to be separately linked and controlled by the remote. Pressing one of the Zone On(|) buttons activates that zone; commands will affect only lights in that zone. Once linked to a zone, lights remain linked until they are unlinked. Steadily depressing the Zone On(|) button restores the lights in that zone to white
| Mode | Description | |
|---|---|---|
| 1 | RGBW Fade In/Out | Red, green, blue and white fade in/out in a set cycle. |
| 2 | Color Flash | Red, green, blue, white, purple and yellow flash in |
| 3 | Disco | Red, green, blue, white, purple and yellow cycle in rotation with flashing transitions |
| 4 | Red Fade in & Flash | Red brightens to full brightness, then flashes 3 times |
| 5 | Green Fade in & Flash | Green brightens to full brightness, then flashes 3 times |
| 6 | Blue Fade in & Flash | Blue brightens to full brightness, then flashes 3 times |
| 7 | Color Fade In/Out & Flash | Multiple colors fade in/out and then flash randomly |
| 8 | 3 Color Change with Fade In/Out | Multiple colors cycle with 3 smooth color changes followed by fade in/out |
| 9 | White Fade In/Out | White flashes continuously |
- DO NOT use with wall dimmers, relays or other control circuits.
- DO NOT install with power applied to controller.
- DO NOT expose the remote or controller to direct or indirect moisture.
1. Switch off the main power supply to the light.
2. Restore power and within 3 seconds, choosing one of the “Zone On” (|) buttons, depress the button until the light begins flashing. It will flash white 2 times, indicating that the light is now linked to that numbered zone and can be controlled via the remote.
To activate a specific zone, depress the “Zone On” (|) button. The zone is now active and remote commands will only affect lights linked to that zone.
1. Determine which zone the light is linked to. This can be done by testing the Zone On/Off controls for each zone on the remote.
2. Switch off the main power supply to the light.
3. Restore power and within 3 seconds, depress one of the “Zone On” (|) buttons until the light flashes 10 times, indicating that the light has been unlinked.
Accessories & Power Supplies
Reviews
Overall Rating
Total Reviews
Tell Us What You Think
Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.
Great remote
I was looking for a RF remote to control my deck lighting when I came across this one. I wanted to keep my controller out of site and this setup lets me do that. I have not installed the system yet but I have tested it and it works flawlessly. The remote is very sensitive and easy to use. I plan to purchase the WiFi controller to be able to use my phone to control my lighting.
