🎃 Halloween 15% Off Sale! Use promo code GHOST18 during checkout. 🎃

LBFA-DT LuxBar Mini Touch Dimmer

Part Number: LBFA-DT
3 photos
Discontinued
In Stock
Was $14.95
Now $12.95 ea.
Volume price as low as $9.71
Orders ship on or before  Monday 10/22/2018
Notes
  • Select options to see various notes.

Overview

LBFA series touch dimmer for LBFA linear light fixtures. Dimmer can be placed anywhere on the series and is used with either 24 or 48 watt 24VDC compact power supply. Includes the power connector (LBFA-PDT), two direct interconnect jumpers (LBFA-I), 1 flat type mounting clip (LBFA-MC1), and user manual.

2 Years
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
RoHS Compliant

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

2 Years
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
RoHS Compliant

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Specifications

Model LBFA-D LuxBar 24VDC Dimmers Specifications
Mini Touch Dimmer 2 Channel Dimmer 4 Channel Dimmer
SPECIFICATIONS LBFA-DT LBFA-D2 LBFA-D4
PRICE
$14.95
$49.95
$59.95
DC INTPUT/OUTPUT VOLTAGE 24V ±5% 24V ±5% 24V ±5%
OUTPUT RATED CURRENT 1.6A (1600ma) 1.6A (1600ma) per channel / 3.2A (3200ma) total 1.6A (1600ma) per channel / 6.4A (6400ma) total
DC OUTPUT POWER 40W 80W 160W
COMPATIBLE POWER SUPPLY CPS-24VDC-24W or CPS-24VDC-48W CPS-24VDC-24W or CPS-24VDC-48W SP-240-24, S-320-24 or RD-150-24
MAX NO. OF LBFA-W2 FIXTURES (max run* = 72) 72 145 290
MAX NO. OF LBFA-W6 FIXTURES (max run* = 24) 24 48 96
MAX NO. OF LBFA-W12 FIXTURES (max run* = 12) 12 24 48
MAX NO. OF LBFA-W24 FIXTURES (max run* = 6) 6 12 24
MAX NO. OF LBFA-W36 FIXTURES (max run* = 4) 4 8 16
MAX NO. OF LBFA-W48 FIXTURES (max run* = 3) 3 6 12
To determine how many LED products can be connected to a power supply:
divide the total current capability of the power supply by the current draw of the LED product
WEIGHT 233g 233g
WORKING TEMP., HUMIDITY 0°C~+40°C, 20%~80% RH 0°C~+40°C, 20%~80% RH
STORAGE TEMP., HUMIDITY -20°C~+80°C, 10%~90% RH -20°C~+80°C, 10%~90% RH
*Maximum number of units in one run connected end to end - for higher quantities, multiple runs back to the power supply must be made to prevent excessive voltage drop
Instructions Manual for Model LBFA-DT Mini Touch Dimmer
Safety Precautions
  • Do not scratch the sensing area. Do not disassemble, repair, or modify the device
  • Disconnect the power (adapter) before installing/removing this dimmer.
  • Do not use this device near water, or moisture for indoor use only.
  • This product should only be operated from the type of power source indicated on the label.
Part Definition
diagram
1.) Dimmer I/O socket - connect to adapter or light bar (bi-directional)
2). Sensor area - sensing region for on/off or dimming control
Recommended Power Supply:
CPS-24VDC-48W (24VDC/2A/48W) Max 40W or 11.8ft (360cm) of LBFA LuxBar series Light Fixtures
Operating Voltage:
DC 24V±5%
Operating Description
On/Off: Use your finger to touch the sensor area shortly.
Dimming:
Continue to hold the finger on the sensor area, it will dim the light bar brightness
Brightness Setting Memory: The previous selected brightness is stored until power is removed from the dimmer
diagram
System Configuration
Mini dimmer can be installed at any place in a light bar chain or network. Several scenarios are illustrated below.
Scenario 1: Dimmer at the end of a chain
diagram
Scenario 2: Dimmer at the middle of a chain
diagram
Scenario 3: Dimmer at the beginning of a chain
diagram
Scenario 4: Dimmer at a branching of a network
diagram
Installation Guide
Step 1: Refer to section IV and configure the preferred dimmer position
Step 2: Connect dimmer to the light bar or adapter with corresponding cables or accessories.
Step 3: Use the specific power line included with kit to connect the adapter when a mini dimmer is installed in a light bar chain or network.
Step 4: Plug in the power (adapter) to AC line.
LBFA-DT - LBFA-DT LuxBar Mini Touch Dimmer
LBFA-DT LuxBar Mini Touch Dimmer

Accessories

Reviews

Overall Rating

Total Reviews

5

Tell Us What You Think

Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.

Sign In Required to Write a Review
Click here to sign in to your account
  • Name
    Zeke
  • Technical Level
    Average
  • Part Number
    LBFA-DT
  • Reviewed On
    04/09/15

Dimmer works great

This dimmer was used with the LBFA NW24 light system. I connected right into the light, so that it fits right next to the light with no cords, just the included pins. The pins are very small and with my aging eyes i used my magnifying loops that I have. The pins needed to be aligned and then pushed together. The dimmer works great and for my wife who is totally not familiar with a touch dimmer she was up and running and using it immediately. It dims very well.

Was this review helpful?
10

  • Name
    Marc
  • Technical Level
    Advanced
  • Part Number
    LBFA-DT
  • Reviewed On
    10/08/16

extra fast shipping and I live in Canada

Perfect addition to existing led bar

Was this review helpful?
00

  • Name
    Anonymous
  • Technical Level
    Advanced
  • Part Number
    LBFA-DT
  • Reviewed On
    04/29/18

Poor instruction

Nowhere does it tell you the gray power cord needs to be used for it to work. If you have a power supply without the barrel connector you need to strip out the gray cable and it's to short. I did that and the on and off works but no dimming function.Very frustrated at this time. The power supply I bought was recommended by your tech department.

LED Light Staff Response

To interconnect with the gray power cable, we suggest that you purchase the CPS-M2ST adapter. To extend the length of the cable, you may also consider one of the CPS-xEXT Cable Extension.

Was this review helpful?
00

  • Name
    Daniel
  • Technical Level
    Advanced
  • Part Number
    LBFA-DT
  • Reviewed On
    06/05/18

Grey Cable

Anonymous is right. You have to use the grey cable.

I installed mine in the middle of a run with a black cable at the beginning of the run. The cable seemed seemed the same. I had no on/off and no dimming. When I switched back to the included grey cable, all functions returned. Dimming as well as the on/off touch feature.

Was this review helpful?
00

  • Name
    Clarissa
  • Technical Level
    Average
  • Part Number
    LBFA-DT
  • Reviewed On
    09/10/18

Excellent product

First time using it, and I loved it. Easy to install and works great.

Was this review helpful?
00


Send us your Feedback