🎃 Halloween 15% Off Sale! Use promo code GHOST18 during checkout. 🎃

NEMA 1 Power Supply Steel Enclosure - For SP-200, SP-320

Part Number: TRC-E-SP200320
Discontinued
In Stock
$99.95 ea.
Volume price as low as $74.96
Orders Ship Today!  10 Hours and 10 Minutes remaining
Notes
  • Select options to see various notes.

Overview

Rugged NEMA 1 steel enclosure. This indoor enclosure is ideal when a permanently installed power supply is required for your application and it meets NEMA 1 requirements. Integral mounting tabs with 4 x .250" mounting holes for surface mountings. 4 x 1/2" NPT Knockouts. Silver powder paint finish with an easily accessible cover that is removable. Fits either Mean Well SP-200 & SP-320.

2 Years
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
UL Recognized
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Recognized label ensures that a product component, such as a power supply or LED light strip, has been tested and verified as safe to use in a UL-Listed product. UL-Listed product samples are tested by UL and meet their Standards for Safety requirements.
ETL Listed
A product that bears an ETL-Certified label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.
For SP-200, SP-320
Documentation
The TRC-E-SP200320 is designed to house several Mean Well Power Supplies. Our TRC enclosure has a silver powder paint finish with an easily accessible cover that is removable. This indoor enclosure is ideal when a permanently installed power supply is required for your application and it meets NEMA 1 requirements.
Compliance ETL listed to UL STD 508A
TRC Part #: TRC-E-SP200320
Dimensions: 15.5"L x 2.5" x 7.125"W
Weight: 5 lbs
Features
  • Designed for contractor installation
  • Rugged NEMA 1 steel enclosure
  • Integral mounting tabs with (4) .250" mounting holes for surface mounting
  • (4) 1/2" NPT knockouts
  • Fits Mean Well SP-200, SP-320, SE-350, SD-200, SD-350, SD-500, or SPV-300 Power Supply Units.
WARNING!
To avoid electric shock, do not energize any circuits before all internal and external electrical and mechanical clearances are checked to assure that all assembled equipment functions safely and properly.
Important Use Notes
  • This enclosure must be used with voltages below 600V
  • This enclosure must be installed in accordance with the National Electrical Code, ANSI/NFPA 70, where the ambient temperature does not exceed 40°C (104°F) maximum.
  • The enclosure is for indoor use only.
Installing Mean Well Power Supplies
This enclosure has been designed to house either Mean Well # SP-200, SP-320 and SE-350 Switching Power Supplies, and is provided with mounting hole positions to fit any of these power supplies.
Install the required Power Supply using the 4 provided M4x6mm Mounting Screws. Do not over tighten. It is recommended that these screws be secured with a workable thread lock compound such as Loctite 222MS or equivalent.
Mounting Instructions
Mounting Tabs have been provided on the enclosure back box for convenient mounting of the enclosure. Each mounting tab is provided with .250" holes for installer provided #10 hardware. Mount the enclosure in a suitable location that ensures free air flow to and around the enclosure. Make sure the power supply fan and enclosure ventilation holes are not obstructed and vent holes are positioned on same side. Standard 1/2" NPT Knockouts are provided for wire entry and exit.
Grounding
This enclosure has been provided with two sets of ground studs with a ground bond jumper for ground connection between the back box and the cover. The ground bond wires between cover and back box, and to the power supply, should be attached to the closest ground studs using the provided hardware. See the drawing on Data Sheet.
2 Years
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
UL Recognized
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Recognized label ensures that a product component, such as a power supply or LED light strip, has been tested and verified as safe to use in a UL-Listed product. UL-Listed product samples are tested by UL and meet their Standards for Safety requirements.
ETL Listed
A product that bears an ETL-Certified label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.

Specifications

TRC-E-SP200320 - NEMA 1 Power Supply Steel Enclosure
NEMA 1 Power Supply Steel Enclosure

Calculator

Reviews

Overall Rating

There are no reviews for this product yet.

Total Reviews

0

Tell Us What You Think

Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.

Sign In Required to Write a Review
Click here to sign in to your account

Send us your Feedback