store image

3528 Outdoor White LED Strip Light - Dual Row LED Tape Light - 24V - Weatherproof IP65 - 475 lm/ft

Part Number: 2WFLS-x1200-24V

Features

  • 24 VDC For longer continuous runs - Up to 20'
  • 3M™ Adhesive backing
  • Can be cut every 1"
  • 5-Year warranty
  • 0-100% Dimmable
Select Color Options:
Whites
Cool 6500K
Natural 4500K
Warm 3500K
Discontinued
Clearance
$94.88 ea.
Volume price as low as $85.39
Orders ship on or before  Thursday 10/28/2021

Complete your install

Notes
  • Select options to see various notes.
Share: 

Overview

This flexible dual-row LED strip light operates on 24 VDC and can be used in longer runs than 12V strips. It emits up to 475 lumens of cool, natural, or warm white illumination per foot. The 16.4' LED tape light can be easily cut into separate 6-LED segments and installed with its peel-and-stick 3M™ adhesive backing. This strip light is designed to last 40,000 hours. It's great for landscapes, boat/marine lighting, under-cabinet lighting, and other indoor or outdoor applications.

5 Years
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
UL Listed
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
ISA Approved
Products that have an International Solid-State Lighting Alliance (ISA) label are approved as quality, energy-efficient LED lights that help to create a sustainable society.
FAQs

What is the difference between 12V and 24V strip lights?

12 volt and 24 volt strips are extremely similar. They look the same, are capable of the same light output, and have identical costs. There are some key differences between the two which matter depending on application. For instance 12 volt strips can be connected directly to your vehicle's 12 volt electrical system. While 24 volt strips on the other hand allow for longer runs, or higher densities of LEDs over their 12 volt counterparts. For the maximum run of a strip see Max Run in the specification table for more information. Read More »

How long of a run can I make my strip?

The Max Run of an LED strip is dependent on two things, voltage and density. 24 volt strips in most instances will give you a longer run than a 12 volt strip. However the LED density of the strip will have an effect on the maximum run. If your install needs to extend beyond a strips Max Run additional power feeds can be run back to your power supply. Please refer to the Max Run spec listed in the specification table of each product information page for specific information about each strip.

What accessories do I need?

The only thing you need for certain to power a strip light is a power supply. We offer accessories used for installation, such as connectors and aluminum mounting channels. As well as others that add functionality such as such as dimmers, switches, and remote controls. Complete kits are also offered which include everything you need to get started.

How bright is the strip? What are lumens and how many do I need?

Lumens are the measure of how bright an LED strip will be when in use. The higher the lumen rating, the brighter the strip will be. Higher lumen strips are usually better for under cabinet and task lighting. Lower lumen strips are typically used for accent lighting applications.

Need additional help? Contact us.

What is color temperature? Which one is best?

Correlated Color Temperature is the hue, or tint of white to expect from a light source and is measured in kelvin. Lower numbers give off a warmer white that is closer to candle light, and is good for relaxed and cozy spaces. Higher numbers give off a cooler white light that will appear more blueish. While values to the middle of the spectrum give off a more neutral or natural white light that is similar to daylight. Natural and cool white are considered ideal for task lighting.

Specifications

Swipe left to see additional specifications
Part NOColor Temperature
CCT / Wavelength
Lumen Per FootBrightness
Power ConsumptionPrice Ea.
2WFLS-CW1200-24VCool 6500K 6500 450 lm/ft7400 lm-(Discontinued)
2WFLS-NW1200-24VNatural 4500K 4500 475 lm/ft7800 lm-$94.88
2WFLS-WW1200-24VWarm 3500K 3500 456 lm/ft7500 lm-$94.88

Accessories & Power Supplies

Reviews

Overall Rating

Total Reviews

6

Tell Us What You Think

Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.

Sign In Required to Write a Review
Click here to sign in to your account
Name
Timothy
Technical Level
Advanced
Part Number
2WFLS-CW1200-24V
Reviewed On
05/11/14

SuperBright 2WFLS-x1200-24V LED: my review

Overall: excellent product, very happy

Technical: you need to be good with a soldering iron; For the power supply (I got the 150W version), you need to have a spare power cord that you can splice up. I used a cord from an old PC.

Installation: Soldering the wires to the LED strip took some time. Also, ensuring that the location you will install the LED strip is marked is important for proper alignment. The power supply generates heat whenever it is on...even with the lights off. Ensure you have a decently ventilated location for mounting. I bought the dimmer which I recommend.

Light color: The 6k has a minor blue tint...but I would consider it a super white. I chose this insulated kit because I wanted the 6k LED's. The non-insulated kit is 4500k or 9k. 4500k is too yellow for me and 9k is way too blue. The insulation layer helps so you do not touch the LED's during install as well (side bonus)

Electric Cost (per my meter): Normal usage...less then $3 per year.

Helpful? Yes (10) No (0)

Name
Luc
Technical Level
Average
Part Number
2WFLS-CW1200-24V
Reviewed On
05/30/15

good product

light work well

Helpful? Yes (1) No (0)

Name
Serge
Technical Level
Advanced
Part Number
2WFLS-CW1200-24V
Reviewed On
10/24/19

They are perfect exactly what we were looking for and shipped and received pretty quick

Helpful? Yes (1) No (0)

Name
Joel
Technical Level
Average
Part Number
2WFLS-CW1200-24V
Reviewed On
08/16/19

Name
Kelly
Technical Level
Expert
Part Number
2WFLS-WW1200-24V
Reviewed On
02/24/20

Installed under upper cabinets over a workbench

Nice and bright. Great attaching glue strip holds in place. Dimmable. I recommend the 24V version. When cutting, I always cut right next to the diode end giving the new cut end a larger area to solder to. Shrink tubing slides over the soldered end and shrinks to a perfect fit.

Helpful? Yes (0) No (0)

Send us your Feedback