
Features
- Various settings are programmable with integrated DIP switches
- Maximize light fixture's efficiency and energy savings
- Slim profile designed to install in bottom of light fixture body
- Fits in 1.3" knockout
Overview
Microwave Motion Sensor from Sharkward maximizes the efficiency of commercial light fixtures by reducing unneccesary energy consumption and lowering maintenance costs. Using the integrated DIP switch, this occupancy sensor conveniently customizes to the needs of any commercial environment. Adjustable settings include sensitivity, time, brightness, standby level, and standby time. Installs in the bottom of the light fixture, in designated 1.3" knockout. See manual for details.
- Maximum Detection Radius 26.2 ft (8 m)
- Maximum Mounting Height 49.2 ft (15 m)
- 0-10V Dimming
- Fixtures that use a 1–10 V dimming driver will be at 10% brightness at the zero setting on the sensor.



The microwave motion sensor allows for multi-level dimming control. Sensitivity setting adjusts detection area (20%, 50%, 75%, or 100%). Time setting adjusts the hold time between when motion is detected and when the light enters standby mode (10 seconds, 1 minute, 5 minute, or 15 minute). Light setting adjusts the daylight threshold which allows the light to stay off if motion is detected and the room is already sufficiently illuminated (disabled, 10 lx, 30 lx, or 50 lx). Standby Level setting adjusts the dimming level of the light during standby mode (0%, 10%, 30%, or 50%). Standby Time setting adjusts the amount of time the light stays in standby mode before shutting off completely (always on, 1 minute, 30 minutes, or 60 minutes).

Image 1: Depending on the Light setting, the light will not switch on when motion is detected if sufficient ambient light is present. If the light is on—even with motion detected—
Image 2: With insufficient natural light, the sensor operates normally and switches the light on automatically based on other motion sensor settings.
Image 3: Once no motion is detected for the selected Time setting, the light will dim to the Standby Level setting.
Image 4: Light switches off automatically after the selected Standby Time has elapsed.
Specifications
![]() |

Accessories

Reviews
Overall Rating
There are no reviews for this product yet.
Total Reviews
Tell Us What You Think
Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.