LED Lighting for Everything
Shop Clearance - Up to 60% Off Lighting Guides Gift Ideas
Car Light Bulbs
LED Strip Lights & LED Bars
LED Home Lighting
LED Landscape Lighting
Off Road LED Light Bars
LED Auxiliary Work Lights
Commercial Truck LED Lights
Emergency Vehicle & Strobe Lights
LED Accent Lighting
Motorcycle LED Lights
RV LED Lights
Boat LED Lights
LED Flashlights & Flashlight Bulbs
Off-Grid LED Lighting
Industrial LED Lighting
Commercial LED Lighting
Hotel & Casino Lighting
Universal LED Kit - 12 LED PCB
- Select options to see various notes.
|50 - 99 pieces||$7.09 each|
|100 - 499 pieces||$6.30 each|
|500 - 999 pieces||$5.91 each|
|1000 + pieces||$5.52 each|
|For discount information or inquiring about larger quantity pricing, click here|
- Your vehicle may require an LED compatible Flasher or Load Resistor. LED brake/tail lamps will not flash with most stock flasher units due to their extremely low current draw. Try our Vehicle LED Bulb Finder to find a compatible flasher for your vehicle. Please See More LED Car Bulb Notes
- For best results the LED color should be the same as the lens color. If bulb is behind a clear lens, use the appropriate color for turn and brake light functions. Please See More LED Car Bulb Notes
12-LED 12 Volt PCB Lamp with plug to fit one of 5 bulb bases including BA9s, 194/168 and 3 festoon sizes (30mm, 36mm and 42mm). PCB Lamp measures 1.3 x 0.8 x 0.2 inches and has 3 inch wires. Includes foam tape for mounting.
RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.
|Base Type||Quick Connector|
|Beam Angle||120 degree|
|LED Quantity||12 LEDs|
|Standards And Certifications||RoHS Compliant|
|Operating Voltage||8~14.5 VDC|
Dimensions: 7" (18cm) x 1.39" (4cm) x 1.39" (4cm)
All specifications are subject to change without notice.
1. CAN Bus LED bulbs are simple plug-and- play LED bulbs which are made specifically for CAN Bus-equipped vehicles. These bulbs work with your vehicle's advanced computer system, so when your vehicle's computer reads them, they respond back correctly.
To see if your vehicle operates with a CAN Bus system, simply remove the bulb you're looking to replace, start your vehicle, and if you have a "Bulb Out" message on your dash you have a CAN Bus system.
|Part NO||CCT / Wavelength |
CCT is used to express the color or shade of white light. The Correlated Color Temperature is the measure of the color appearance of the light emitted from a light source, measured in degrees kelvin (K). The CCT rating is a general 'warmth' or 'coolness' measure of its appearance. Wavelength is used to express a specific color of light other than whites. Wavelength is the portion of the visible spectrum that the human eye can detect, between 380 and 700 nanometers (nm). When trying to match an existing bulb color choose a replacement that most closely matches the CCT or wavelength of the original.
|MCD per LED||Intensity per LED||Brightness||Millicandela |
Millicandela is a unit of measurement for the light output of LEDs. Candela is one of the seven base units of the International System of Units. It is a unit of Luminous Intensity (I), or Light Power per Steradian (SR), while steradian is a unit of 3D cone angle with which the projected area of 1 steradian over a sphere with a 1m radius, is 1 square meter. One thousand millicandela equals one candela or approximately one candle power.
|Beam Angle |
Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.
|Current Draw @ Operating Voltage |
Current Draw is used to size fuses and wire for a circuit. Current draw is the amount of energy consumed by an LED or LEDs in an electrical circuit at a specific voltage, measured in amps (A) or milliamps (mA).
|UAL-B12-DI||470 nm||-||-||-||-||-||52 mA||(Discontinued)|
|UAL-R12-DI||625 nm||-||-||-||-||-||66 mA||(Discontinued)|
|UAL-A12-DI||595 nm||-||-||-||-||-||64 mA||(Discontinued)|
12 LED PCB Lamp
921 Wedge Base
30mm Festoon Base
36mm Festoon Base
42mm Festoon Base
Dimensions in millimeters (inches)Installation Notes
There are no reviews for this product yet.
Tell Us What You Think
Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.