
27W T5HO LED Tube - 3,200 Lumens - F54T5HO Equivalent – Dual-End Ballast Compatible Type A - 40 Pack

Save 10% On Your Entire Order using code MEMDAY22
Overview
LED T5 tubes are the long-lasting, high-quality lighting alternatives to fluorescent tube lights. The ballast-compatible F54T5 HO tube can be used in fluorescent fixtures with ballasts. Perfect for office lighting, school lighting, hospital lighting, factory lighting, and more, the 4' LED T5 tube has an output of 3,200 lumens. LEDs emit white illumination without the green hue or flickering that is common in fluorescent lighting. Also, unlike fluorescent lights, this LED T5 tube turns on instantly—even in cold weather—and is simple to dispose of because it contains no harmful mercury. The dual-ended LED light uses just 27 watts of power—significantly less than the 54 watts that would be consumed by an equivalent fluorescent tube light. With a life expectancy 5 times as long as fluorescent tubes, the LED T5 tube reduces costly repairs, disposal fees, and the need for replacements. Price per 40-pack.



- Factories
- Garages
- Daycare Centers
- Hospitals
- Schools
- Hotel Lighting
- Offices
- Commercial Complexes
- Elevator Light Bulbs
- Food Processing Plants
T5HOA-x27S-GPC Supported Electrical Configurations
Connection Types
Type A Dual-End LED Tube Lights are a plug-n-play solution for existing fixtures and as such they require being wired from both ends of the tube as a typical fluorescent light would require.

Dual Ended
Electrically connected on both ends of the tube, with one end connecting to line and one to neutral. This type can use shunted or non-shunted sockets. As with the original bulbs these are replacing, one end of the tube connects to L and the opposite end to N—one end should not be connected to both.
Ballast Compatibility
Since Type A Dual-End LED Tube Lights are intended to directly replace fluorescent tubes without any other electrical work they require the use of the original ballast. If you have determined that your ballast is functioning properly this is the easiest method of relamping.
How To Wire:

Socket Wiring
When installing Type A Dual-End LED Tube Lights in a fixture which previously had a fluorescent tube light you can simply install the light leaving the shunting type intact.
Shunted
Both contacts in the same socket (tombstone) are connected/bridged and are the same polarity—either L or N.
Non-Shunted
Contacts in the same socket (tombstone) are split, but can be either the same polarity or opposing polarity depending on the way the socket (tombstone) is wired.
Determining Shunted or Non-Shunted
Below are some typical examples of how shunted or non-shunted sockets might look. You should always check the socket terminals with a multimeter before installing bulbs or rewiring. If the two sides of a socket have continuity, then the socket is shunted regardless of appearance.

Need To Wire Differently?
LED tubes lights can be wired with or without ballast, and from either end depending on the tube type.
Specifications
Click any blue question mark for specification details and explanation.
Part NO | Color Temperature | LED Wattage | Intensity per LED | Milliwatt | CCT / Wavelength | Price Ea. | Product Weight | Lumen Per Dollar | IP Rating | Typical Use/Input Voltage | |
---|---|---|---|---|---|---|---|---|---|---|---|
- | T5HOA-30K27S-GPC-40PK | Warm 3000K | - | - | - | 3000 K | (Discontinued) | - | 346.06 lumen/dollar | - | - |
- | T5HOA-40K27S-GPC-40PK | Natural 4000K | - | - | - | 4000 K | (Discontinued) | - | 336.89 lumen/dollar | - | - |
- | T5HOA-50K27S-GPC-40PK | Cool 5000K | - | - | - | 5000 K | (Discontinued) | - | 336.89 lumen/dollar | - | - |
![]() |
Reviews
Overall Rating
Total Reviews
Tell Us What You Think
Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.