
Features
- Rugged steel construction
- 120° beam angle
- 12-14.5 VDC
- 2 year warranty
Overview
Replace existing bolts with the MAL series Miniature LED License Plate Bolt to add additional light to license plates. Produces a wide 120° beam in one of 7 available colors to provide maximum visibility to make numbers easy to read at night or in inclement weather. Waterproof steel housing in black or silver. Simply screws into existing bolt holes.
- Includes 12” pigtail connection
- Rated IP65 for wet conditions
- 12-14.5 VDC
- 2 year warranty

- Footwell Lights
- License Plate Lights
- Motorcycle Accent Lights
- Vehicle Accent Lights
- Trunk Lights
- Engine Lights
Specifications
Part NO | Color Temperature | Diameter | Intensity | Milliwatt | CCT / Wavelength | Price Ea. | Ambient Operating Temperature | |
---|---|---|---|---|---|---|---|---|
MAL-B-CW2 | Cool 5500K | - | 15 lm | - | 5500 | $2.95 | - | |
MAL-B-WW2 | Warm 3000K | - | 20 lm | - | 3000 | $2.95 | - | |
MAL-B-B2 | Blue | - | 4 lm | - | 465 nm | $2.95 | - | |
MAL-B-G2 | Green | - | 4 lm | - | 525 nm | $2.95 | - | |
MAL-B-R2 | Red | - | 6 lm | - | 625 nm | $2.95 | - | |
MAL-B-A2 | Amber | - | 8 lm | - | 595 nm | $2.95 | - | |
MAL-S-CW2 | Cool 5500K | - | 15 lm | - | 5500 | $2.95 | - | |
MAL-S-WW2 | Warm 3000K | - | 20 lm | - | 3000 | $2.95 | - | |
MAL-S-B2 | Blue | - | 4 lm | - | 465 nm | $2.95 | - | |
MAL-S-G2 | Green | - | 4 lm | - | 525 nm | $2.95 | - | |
MAL-S-R2 | Red | - | 6 lm | - | 625 nm | $2.95 | - | |
MAL-S-A2 | Amber | - | 8 lm | - | 595 nm | $2.95 | - | |
MAL-S-NW2 | Natural 4000K | - | 15 lm | - | 4000 | $2.95 | - | |
MAL-B-NW2 | Natural 4000K | - | 15 lm | - | 4000 | $2.95 | - |
Lumen meters are a great way to measure white light output but can be deceptive for colored bulb intensity. Lumens measure light wavelengths in all colors of the visible spectrum. Because multiple wavelengths create white light and colored bulbs are a single-wavelength source, colored bulbs will have lower lumen readings. However, they will appear equally as bright as a white bulb. | ![]() |
![]() |
![]() |
---|
Accessories & Power Supplies

Reviews
Overall Rating
Total Reviews
Tell Us What You Think
Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.
Versatile, High Quality Lights
These are very nice LEDs. The cool white seems to be an accurate 6700 K. They appear to have a wider dispersion than the 120 degrees listed, but I liked that feature. I used these as auto floorboard courtesy lights. They are just the right brightness, color, and beam pattern. Mounting is a cinch in a very small drilled hole. The quality is very good. Excellent product and value.
Great for custom bumpers
As alot of car and truck guys know, license plate lights are a PITA to find for custom bumpers. alot of the universal lights are bulks and ugly, some are very flashy and attract more cops then anything.
I use these on all my custom bumpers, very low profile, and one on each side of the plate not only secures the plate nicely but lights it up great. never had any flickering or dead leds ever. good price and great product!
Fantastic and solid light!
I'm using two of these as tail light at the end of a live steam ride-on train, and they are perfect! Solid so they won't break, waterproof, self-contained resistors and very bright for safety! Who knew you sold lights for use on a steam engine- pulled train! :-).
Double purpose
I bought two of these to replace a flawed design plate light on my brothers car. He lives down a 6 mile gravel road that causes the plate light to get dusty to the point that he gets pulled over at night.
These not only light the plate from two angles, but seem to be harder to get dirty because they are attached to the plate itself in place of the plate bolts. Light output is very well and the "cool white" I ordered stick out against everybody else's yellow plate lights. Wires come from inside the mounting stud, so there is no second hole needed to run wires.
I recently ordered two more to use as footwell lights tied into the courtesy light circuit so when the door opens, the floor area will be illuminated along with the normal light that comes on.