Select LED Color:
Whites
Cool 5000KNatural 4000K
Discontinued
In Stock
Was $129.95
Now $119.95 ea.
Volume price as low as $89.96
Orders Ship Today!  12 Hours and 11 Minutes remaining
Notes
  • Select options to see various notes.
Utility Rebate Estimate

Overview

This LED wall pack is great for security lighting, warehouse lighting, entryway lighting, and more. The wall pack emits up to 8,000 lumens of cool white or natural white illumination and operates within a wide 100-277 VAC range. LEDs in the full-cutoff wall pack emit a 60° x 90° oval beam angle for glare-free illumination that extends downward. This 70-watt wall pack is designed to replace 175-watt metal-halide (MH) fixtures. And with a life expectancy that's approximately 3 times as long as MH fixtures, the LED light reduces costly repairs and the need for replacements. A weatherproof die cast aluminum housing and polycarbonate lens guard against damage done by harsh or wet weather conditions, and a watertight removable cover allows for easy access to the driver. Also available with photocontrol.

Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
The DesignLights Consortium® (DLC®) partners with energy-efficiency groups and utility companies to establish a set of standards for commercial LED light fixtures. The product is tested and must meet quality, energy-efficiency, and performance requirements to be added to the DLC's Qualified Products List. For more information, click here. To view all of our DLC® listed products, click here
Products that are LM-79 certified have been tested for photometric and electrical data by an Environmental Protection Agency (EPA) recognized laboratory. The Illuminating Engineering Society of North America (IES) created LM-79-08—Approved Method: Electrical and Photometric Measurements of Solid-State Lighting Products—to establish guidelines and procedures for the testing of solid-state lighting (SSL) products such as LED fixtures. Procedures are listed for luminous flux, electrical power, luminous intensity distribution, and chromaticity. See documentation section under specifications for available report.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.
 Applications
LED Parking Lot Lights
LED Security Lights
Commercial Entry Ways
Commercial And Industrial Exterior Lighting
Metal Building Lighting
Commercial Complexes
Parking Garage Lighting
Industrial Facilities
Gas Station Lighting
Commercial Lighting

LEDs
Multi-Volt Operation
Operates Within a Wide 100-277 VAC Range

High Efficiency
High Efficiency
Environment Friendly, Low Energy Draw

Lumen
High Output
8000 Lumens of Cool White Light

LEDs
Metal-Halide Retrofit
Equivalent to 175W Metal-Halide Fixtures

DLC Listed
 Learn
The DesignLights Consortium® (DLC®) partners with energy-efficiency groups and utility companies to establish a set of standards for commercial LED light fixtures. The product is tested and must meet quality, energy-efficiency, and performance requirements to be added to the DLC's Qualified Products List. For more information, click here. To view all of our DLC® listed products, click here
WPFC-CW70
Meets Design Light Consortium Standards

Lumens
Oval Beam Pattern
60°x90° Oval Beam Angle for Glare-Free Illumination

Durable Housing
Die Cast Aluminum Housing
Watertight Removable Cover Allows for Easy Access to the Driver

Polycarbonate Lens
Polycarbonate Lens
Guards Against Damage Done by Harsh or Wet Weather Conditions

Sealed Housing
Water and Dust Proof Housing

Lumen
Longevity
Lasts 2x longer than Metal-Halide Fixtures

Documentation
PDF WPFC-CW70 Spec Sheet PDF WPFC-NW70 Spec Sheet PDF LM-79 Report for WPFC-CW70
IES IES File for WPFC-CW70    
 About Photometric Reports

Standards And Certifications: LM-79

Products that are LM-79 certified have been tested for photometric and electrical data by an Environmental Protection Agency (EPA) recognized laboratory. The Illuminating Engineering Society of North America (IES) created LM-79-08—Approved Method: Electrical and Photometric Measurements of Solid-State Lighting Products—to establish guidelines and procedures for the testing of solid-state lighting (SSL) products such as LED fixtures. Procedures are listed for luminous flux, electrical power, luminous intensity distribution, and chromaticity.


Standards And Certifications: LM-80

Products that are LM-80 certified have been tested for lumen depreciation by an Environmental Protection Agency (EPA) recognized laboratory. The Illuminating Engineering Society of North America (IES) created LM-80-08 to establish guidelines and procedures for the testing of solid-state lighting (SSL) products, such as LED packages, modules, and arrays (not complete fixtures). Procedures are listed for testing lumen maintenance over a period of time.


IES Files & Their Uses

IES (Illuminating Engineering Society) files contain photometric data, such as color, intensity, and beam pattern for luminaires. This data can be utilized by architectural and engineering programs for modeling and design purposes.

Specifications

Beam Angle 60 x 90 Focused Angle
Comparable Wattage 175 Watts Metal-Halide
Connector Type Pigtail
Input Voltage 100 ~ 277 VAC
IP Rating Weatherproof IP65
LED Brand Philips
LED Lifetime 50000 Hours
LED Type 3030 SMD
Material Aluminum Housing, Polycarbonate Lens
Operating Temperature -30~+45 °C
Polarity Sensitive No
Weight 6.7 lbs
Replacement For 175 Watt MH
Special Features Constant-Current Driver, Weatherproof
Storage Temperature -40~+80 °C
Type Full Cutoff, Wall Pack
Operating Voltage 100~277 VAC
Wattage 70 Watts
All specifications are subject to change without notice.
Swipe left to see additional specifications
Part NOCCT / Wavelength
CAN Bus
Brightness
Beam Angle
Current Draw @ Operating Voltage
Price Ea.
WPFC-CW705000 K-8000 lm-577 mA$119.95
WPFC-NW704000 K-7800 lm-598 mA$119.95
 About Photometric Reports

Standards And Certifications: LM-79

Products that are LM-79 certified have been tested for photometric and electrical data by an Environmental Protection Agency (EPA) recognized laboratory. The Illuminating Engineering Society of North America (IES) created LM-79-08—Approved Method: Electrical and Photometric Measurements of Solid-State Lighting Products—to establish guidelines and procedures for the testing of solid-state lighting (SSL) products such as LED fixtures. Procedures are listed for luminous flux, electrical power, luminous intensity distribution, and chromaticity.


Standards And Certifications: LM-80

Products that are LM-80 certified have been tested for lumen depreciation by an Environmental Protection Agency (EPA) recognized laboratory. The Illuminating Engineering Society of North America (IES) created LM-80-08 to establish guidelines and procedures for the testing of solid-state lighting (SSL) products, such as LED packages, modules, and arrays (not complete fixtures). Procedures are listed for testing lumen maintenance over a period of time.


IES Files & Their Uses

IES (Illuminating Engineering Society) files contain photometric data, such as color, intensity, and beam pattern for luminaires. This data can be utilized by architectural and engineering programs for modeling and design purposes.

Full Cutoff LED Wall Pack - 70W - Cool White

Accessories

Reviews

Overall Rating

There are no reviews for this product yet.

Total Reviews

0

Tell Us What You Think

Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.

Sign In Required to Write a Review
Click here to sign in to your account

Send us your Feedback