store image

48W T8/T12 LED Tube - 5760 Lumens - 8ft - Ballast Bypass Type B - 75W Equivalent - 5000K - 25 Pack

Part Number: T8B-50K48W-8

Features

  • Ballast bypass LED tube (UL Type B)
  • Also available in 36W
  • One continuous 8ft light
  • Replaces 59W T8 and 75W T12 fluorescent tubes
  • 5760 lumen @ high efficacy 120 lm/W
Discontinued
Out of Stock, Expected 11/01/21 Backorder Available
$478.50 per Pack
Volume price as low as $17.23
Orders ship on or before  Tuesday 09/28/2021
Notes
  • Select options to see various notes.
Utility Rebate Finder
Share: 

Overview

T8B series T8/T12 LED Tube replaces conventional single pin 8ft fluorescent lamps installed in mid to high ceiling applications found in shops, warehouses and retail locations. Ballast bypass LED tube lamps require a simple rewiring during installation. Converting existing 8ft linear fluorescent fixtures to LED is the easiest way to eliminate ballast issues and maintenance costs without a comprehensive reinstall. 8ft T8 LED lamps feature instant-on, cold-start, flicker-free illumination and are approximately 50% more energy efficient than standard F96T12 lamps. Price per 25 pack.

Product Details:
  • 110–277 VAC input
  • Single pin FA8 base
  • -4°–140° F (-20°–60° C) operating temperature range
  • Rated for open or enclosed fixtures
  • Frosted polycarbonate lens
  • 5000K color temperature
  • 50,000 hour (L70) rated life
  • UL Classified in compliance with UL 1598C
  • Rated for dry/damp locations (IP20)
  • 5-year warranty

5 Years
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
UL Classified
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. UL tests specific properties of product samples to ensure that they adhere to applicable UL requirements, Standards for Safety, and other national and international organization's standards.
Applications
  • Rural Buildings
  • Warehouses
  • Schools
  • Retail
  • Shops
  • Industrial Facilities
  • Hallways

T8B-50K48W-8 Supported Electrical Configurations

Connection Types

Type B Dual-End LED Tube Lights can be placed into unmodified sockets and simply need to be oriented to match the existing polarity of the fixture.

Dual Ended

Electrically connected on both ends of the tube, with one end connecting to line and one to neutral. This type can use shunted or non-shunted sockets. As with the original bulbs these are replacing, one end of the tube connects to L and the opposite end to N—one end should not be connected to both.

Ballast Compatibility

Bypassing ballast is required for Dual-End Type B LED Tube Light installations and will not function if connection to the ballast is left intact. This is a popular solution when relamping, due to the likelihood of an eventual ballast failure.

How To Wire:

Socket Wiring

When installing Type B Dual-End LED Tube Lights in a fixture which previously had a fluorescent tube light you can simply install the light leaving the sockets in a shunted or non-shunted configuration.

Shunted

Both contacts in the same socket (tombstone) are connected/bridged and are the same polarity—either L or N.

Non-Shunted

Contacts in the same socket (tombstone) are split, but can be either the same polarity or opposing polarity depending on the way the socket (tombstone) is wired.

Determining Shunted or Non-Shunted

Below are some typical examples of how shunted or non-shunted sockets might look. You should always check the socket terminals with a multimeter before installing bulbs or rewiring. If the two sides of a socket have continuity, then the socket is shunted regardless of appearance.

Need To Wire Differently?

LED tubes lights can be wired with or without ballast, and from either end depending on the tube type.

Specifications

T8B-50K48W-8 - 48W T8/T12 LED Tube - 5760 Lumens - 8ft - Ballast Bypass Type B - 75W Equivalent - 5000K - 30 Pack
48W T8/T12 LED Tube - 5760 Lumens - 8ft - Ballast Bypass Type B - 75W Equivalent - 5000K - 30 Pack

Reviews

Overall Rating

There are no reviews for this product yet.

Total Reviews

0

Tell Us What You Think

Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.

Sign In Required to Write a Review
Click here to sign in to your account

Send us your Feedback