Flexible LED Neon Rope Lights - Neon Strip Lights - Dimmable

Part Number: NF-x30-CL
20 photos
Select LED Color:
Whites
Natural 4000K
Colors
RedAmberGreenBlue
Select Custom Lengths:
Minimum segment length is . Price is calculated by quantity of continuous segments.
Discontinued
In Stock
$29.95 ea.
Volume price as low as $22.46
Orders Ship Today!  8 Hours and 15 Minutes remaining
Notes
  • Select options to see various notes.

Overview

LED Neon Rope Lights are a modern, long-lasting, flexible alternative to traditional glass tube neon lights. Unlike fluorescent neon lights, these shatterproof neon flex lights can be easily bent to any shape and contain no harmful gases. They have endless indoor and outdoor application possibilities, such as decorative gas station lighting, movie theater lighting, landscape lighting, cove lighting, retail store lighting, bar/club lighting, architectural border lighting, signs, roof edging, doors, storefronts, window trim, counters, and more! These dimmable LED neon strip lights emit up to 161 lumens of natural white, amber, blue, green, or red illumination per foot. And unlike traditional rope lights that show hot spots (dots of light), neon flex lights emit a seamless line of smooth illumination. The durable, waterproof neon strip lights are available in custom lengths. Max run is 49' if powered from one end and 98' if powered from both ends. They're constructed of UV-resistant silicone and have designated cut lines every 2 inches. Easily connect strips to each other and to power with neon flex accessories (sold separately). Accessories are available for many setup configurations. The neon flex strips have 24 VDC operation.

5 Years
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
UL Listed
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
CE
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
RoHS Compliant

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Flexible LED Neon Rope Lights - Neon Strip Lights - Dimmable - NF-x30-CL
 Applications
Architectural Lighting Accent Lighting
Retail Lighting Commercial And Industrial Exterior Lighting
Storefront Lights Commercial Complexes
Department Store Lighting Trade Show Lighting
LED Bridge Lighting Replacement for Neon Lights

The NF-x30-CL has an operating voltage range of 22~26 VDC
Voltage Operation Range
22~26 VDC

LEDs in NF-x30-CL will last 50000 Hours
Longevity
Designed to Last at Least 50,000 Hours

High Output
Up to 161 Lumens of Illumination per Foot

Sealed Housing
Water and Dust Proof Housing


Input Power Installation


End Cap Installation


Silicon Fitting Power Installation


Interconnect Connector Installation


90° Connector Installation


Mounting Instructions


Trouble Shooting

The whole light doesn’t work

  1. Check that the power supply is plugged in, switched on and receiving power.
  2. Check all light, dimmer or controller connections, connecting from the power supply to the fi xture.
  3. Check polarity of all wire connections.
  4. Make sure power supply output voltage is 24V DC.
  5. Check front connector is inserted into backside of PCB and properly assembled.

Light appears dim or dull at one end

  1. Check whether the output voltage of the power supply is lower than that of light.
  2. Adjust the dimming level to maximum.
  3. Power from both ends or shorten lighting length to prevent voltage drop.

Light emitting appear excessive brightness

  1. Check whether the output voltage of the power supply is higher than that of the light.
  2. Check whether the power grid is stable.

If the first segment doesn’t work

  1. Cut not in indicated cutting line or not in a straight line.
  2. Cut out and remove the fi rst segment.
  3. Damage caused to the fi rst LED when inserting the front connector to the right side of PCB.
  4. Cut out the fi rst segment and properly assemble connector.
  5. Water ingress due to poor connector assembly could cause a short circuit of fi rst segment.
  6. Replace length with a new one.
  7. External impact damage inside LEDs.
  8. Only use your hands to install LED Neon Flex into aluminum profi le.

Light is flashing on and off

  1. Check the power supply to ensure it supports the length you are using.
  2. Select the appropriate strength or install an additional power supply to support your installation.
  3. Check that the power supply output voltage is stable.
  4. Check front connector is properly installed with good contact with the copper PCB.
  5. Check proper controller is connected.
5 Years
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
UL Listed
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
CE
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
RoHS Compliant

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Specifications

Beam Angle 150 degree
Current Draw @ Operating Voltage [1] 400mA
Current Draw per Foot 122mA
Dimensions
Dimmable Yes
IP Rating Waterproof IP67
Intensity 450 Lumen
LED Lifetime 50000 Hours
LED Type 3014 SMD
Length per Segment 100cm
Lumen Per Foot 137 lm/ft
Max Continuous Length 3000cm (1181.1 in)
Max Run[2] 30
Operating Temperature -25~+60 °C
Operating Voltage Range 22~26 VDC
Polarity Sensitive Yes
Power Consumption 9.6 Watts
Segment Length 2in
Standards And Certifications CE, RoHS Compliant, UL Listed
Strip Width 10mm (0.39in)
Total Length Custom Length
Type Neon Rope
UL File Number E357850
Wattage per Foot 2.9 Watts
Wavelength 20 nm
   
Package Weight: 12.13oz (0.34kg)
Package Dimensions: 39.4" (100cm) x 2" (5cm) x 1" (3cm)
All specifications are subject to change without notice.
1. Current Draw is used to size fuses and wire for a circuit. Current draw is the amount of energy consumed by an LED or LEDs in an electrical circuit at a specific voltage, measured in amps (A) or milliamps (mA).
2. Max Run (or maximum run) is used to specify the total number of strips that can run in series without experiencing dimming due to voltage drop. When Max Run is reached, power wires for additional devices must be 'home run' directly back to the power source, starting a new run.
Swipe left to see additional specifications
Part NONumber of LEDs in UnitEmitting ColorRadiant PowerBeam Angle
CRI
Price
NF-A-CL-Amber---$29.95
NF-B-CL-Blue---$29.95
NF-G-CL-Green---$29.95
NF-NW-CL-Natural 4000K---$29.95
NF-R-CL-Red---$29.95
NF-x30-CL - Flexible LED Neon Rope Lights - Neon Strip Lights - Dimmable
Flexible LED Neon Rope Lights - Neon Strip Lights - Dimmable

Accessories & Power Supplies

Reviews

Overall Rating

There are no reviews for this product yet.

Total Reviews

0

Tell Us What You Think

Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.

Sign In Required to Write a Review
Click here to sign in to your account

Send us your Feedback