Dimmable 54W Up/Down LED Panel Light Fixture - Semitransparent - 1x4 - 5,400 Lumens - Suspended Mount

Part Number: UDPD-xK14-54
20 photos
Discontinued
In Stock
$249.95 ea.
Volume price as low as $187.46
Orders Ship Today!  12 Hours and 23 Minutes remaining
Notes
  • Select options to see various notes.

Overview

Illuminate any room and its ceiling with this suspended Up/Down LED Panel Light. The dimmable 1' x 4' LED panel light is perfect for office lighting, pool table lighting, restaurant lighting, decorative or painted ceiling illumination, retail shop lighting, hospital lighting, and more! It provides ceiling accent lighting and usable downlighting simultaneously, and its transparent polycarbonate diffuser with frosted center delivers smooth illumination without visible bulbs or hot spots.

Bright and powerful—the 54-watt up/down light emits 5,400 lumens of natural white illumination—equivalent to the output of 2 32-watt fluorescent T8 tubes. This energy-efficient LED panel lasts 5 times longer than fluorescent panels, operates within a wide 100-277 VAC range, and can be linked to additional panels. The decorative panel has a sturdy white aluminum alloy frame with an internal J-box for clean wiring. Includes a UL-Recognized 0-10V dimmable constant-current driver and a suspension kit. Brightness can be controlled with a 0-10V dimmer or by using the light's step-dimming (power-cycle dimming) feature. Optional hardware available for mounting to J-boxes.

5 Years
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
ETL Listed
A product that bears an ETL-Certified label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.
FCC
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.
Dimmable 54W Up/Down LED Panel Light Fixture - Semitransparent - 1x4 - 5,400 Lumens - Suspended Mount - UDPD-xK14-54
 Applications
Hospital Lighting Office LED Lighting
Decorative Light Panel Metal Building Lighting
Restaurant Lighting  

Voltage Range
Wide Operating Voltage Range
100-277 VAC

LEDs
Sturdy Frame
Sturdy White Aluminum Alloy Frame

Lumen
High Output
Up To 5400 Lumens of Natural White Light

Dimmable
Dimmable
Includes A UL-Recognized 0-10V Dimmable Constant-Current Driver

 Specifications & Mounting Options

Mounting Option
  • Drop Ceiling: This option provides an enclosed space for wire connections and is meant for use when panels are recessed or suspended.
  • Wall and Drywall Ceiling: This kit allows for easy LED panel light installation. It includes 1 mounting plate with a slotted design for compatibility with multiple size J-boxes allowing for this kit to be used with your current J-box. Hardware is included for securing the light panel to the surface of your ceiling and to your current J-box.
SAFETY INFORMATION
  • This product should be installed by a fully certified electrician in accordance with local building and electrical codes.
  • Due to risk of electric shock, ensure that the main power source and circuit breakers are switched off before performing any installation or wiring procedures.
  • Do not install insulation within 2 in./51mm of any part of the panel light fixture.
 Step Dimming Instructions:

Step dimming module allows the panel to be set to 3 different brightness intensities.

When the panel is powered on it will automatically be set to 100% brightness. There are three brightness modes of 100%, 50%, and 10% brightness. You can step through the brightness settings in order power cycling the panel for more than half a second, but less than 2 seconds.

The panel can be reset to 100% brightness at any time by powering off the panel for 3 seconds or more.

5 Years
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
ETL Listed
A product that bears an ETL-Certified label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.
FCC
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.

Specifications

The 54-watt LED light typically consumes 56 total watts due to the combination of all internal components.
Beam Angle 330 degree
Color Temperature 4000 K
Comparable Wattage 2 32W Fluorescent T8 Tubes
Connection Type Pigtail
CRI 84 CRI
Current Draw[1] 470mA
Dimensions 1ft x 4ft
Dimmable Yes
Dimming Type 0-10-Volt, Power Cycle
Efficacy 100 lm/w
Finish White
IP Rating Non-Waterproof
LED Brand Seoul
LED Color Natural 4000K
Number of LEDs in Unit 84 LEDs
LED Type 5630 SMD
Intensity 5400 Lumen
Polarity Sensitive No
Product Weight 12 lbs
Special Features Semi-Transparent when Off
Standards And Certifications ETL Listed, FCC
Total Power Consumption 54 Watts
Type Panel
Volts 100~277 VAC
Package Weight: 14lb 0oz (6.35kg)
Package Dimensions: 50" (127cm) x 15" (38cm) x 3" (8cm)
All specifications are subject to change without notice.
1. Current Draw is used to size fuses and wire for a circuit. Current draw is the amount of energy consumed by an LED or LEDs in an electrical circuit at a specific voltage, measured in amps (A) or milliamps (mA).
UDPD-xK14-54 - Dimmable 54W Up/Down LED Panel Light Fixture - Semitransparent - 1x4 - 5,400 Lumens
Dimmable 54W Up/Down LED Panel Light Fixture - Semitransparent - 1x4 - 5,400 Lumens

Accessories

Reviews

Overall Rating

There are no reviews for this product yet.

Total Reviews

0

Tell Us What You Think

Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.

Sign In Required to Write a Review
Click here to sign in to your account

Send us your Feedback