12 Volt LED Car Bulbs
LED Light Strips & Light Bars
LED Household Lighting
LED Landscape Lighting
Off Road LED Light Bars
LED Truck Lights
LED Work Lights
Emergency Vehicle & Strobe Lights
LED Accent Lighting
Motorcycle LED Lights
Boat, RV, and Other Lighting
LED Flashlights & Flashlight Bulbs
Industrial LED Lighting
Specialty LED Lighting
Hotel & Casino Lighting
LBM-R4-DI series LED Module Strings
- Select options to see various notes.
|50 - 99 pieces||$1.75 each|
|100 - 499 pieces||$1.56 each|
|500 - 999 pieces||$1.46 each|
|1000 + pieces||$1.37 each|
|For discount information or inquiring about larger quantity pricing, click here|
This product has been discontinued.
LBM-R4-DI series waterproof LED module strings. Each module has 4 medium viewing angle 60 degree 5mm High Flux LEDs. PVC design housing with 2 mounting screw holes and included double sided adhesive foam tape. 3 inch wires between each module. 12VDC operation. Quantity ordered will be wired together on a string with 50 modules maximum per strand.
Standards and Certifications
|LBM-x4-DI series Sign Modules use 3mm and 5mm High Flux Piranha LEDs with 90° viewing angle - SELECT LED COLOR TO MATCH SIGN PLASTIC COLOR|
|Beam Angle||60 degree|
|Water Resistance||Waterproof IP68|
|Number of LEDs in Unit||4 LEDs|
|Length (in)||2.2in (0.18ft)|
|Operating Voltage Range||10~14.5 VDC|
All specifications are subject to change without notice.
|Part NO||Total Length||Strip Width||Emitting Color||CCT / Wavelength |
CCT is used to express the color or shade of white light. The Correlated Color Temperature is the measure of the color appearance of the light emitted from a light source, measured in degrees kelvin (K). The CCT rating is a general 'warmth' or 'coolness' measure of its appearance. Wavelength is used to express a specific color of light other than whites. Wavelength is the portion of the visible spectrum that the human eye can detect, between 380 and 700 nanometers (nm). When trying to match an existing bulb color choose a replacement that most closely matches the CCT or wavelength of the original.
|Intensity Per Foot||Intensity||Radiant Power||Beam Angle |
Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.
|Current Draw per Foot @ 12 Volts DC |
Current Draw Per Foot is used to size power supplies, normally converted to watts per foot. This is equated using total wattage divided by number of linear feet. Current draw per foot is the amount of current consumed by an LED or LEDs in an electrical circuit per linear foot at a specific voltage, measured in milliamps (mA) or watts (W).
|Current Draw @ 12 Volts DC |
Current Draw is used to size fuses and wire for a circuit. Current draw is the amount of energy consumed by an LED or LEDs in an electrical circuit at a specific voltage, measured in amps (A) or milliamps (mA).
|Max Run |
Max Run (or maximum run) is used to recommend the total number of devices that can run in succession without experiencing dimming due to excessive voltage drop in a series circuit (end to end). When Max Run is reached, power wires for additional devices must be 'home run' directly back to the power source, starting a new run.
|LBM-G4-DI||2.2in (0.18ft)||-||Green||518 nm||51275 mcd/ft||18000 mcd||-||-||218 mA|
|LBM-R4-DI||2.2in (0.18ft)||-||Red||630 nm||17661 mcd/ft||6200 mcd||-||-||94 mA|
|LBM-A4-DI||2.2in (0.18ft)||-||Amber||595 nm||17661 mcd/ft||6200 mcd||-||-||189 mA|
Use our Calculator
Use our calculator.
Use our Calculator
Use our calculator.
There are no reviews for this product yet.
Tell Us What You Think
Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.