LED Lighting for Everything
Shop Clearance - Up to 60% Off Lighting Guides Gift Ideas
Car Light Bulbs
LED Strip Lights & LED Bars
LED Home Lighting
LED Landscape Lighting
Off Road LED Light Bars
LED Auxiliary Work Lights
Commercial Truck LED Lights
Emergency Vehicle & Strobe Lights
LED Accent Lighting
Motorcycle LED Lights
RV LED Lights
Boat LED Lights
LED Flashlights & Flashlight Bulbs
Off-Grid LED Lighting
Industrial LED Lighting
Commercial LED Lighting
Hotel & Casino Lighting
LBM-x2 series LED Module String
- Quantity ordered will be wired together on a string with 100 modules maximum per strand.
|10 - 99 pieces||$0.85 each|
|100 - 499 pieces||$0.76 each|
|500 - 999 pieces||$0.71 each|
|1000 - 4999 pieces||$0.67 each|
|5000 - 9999 pieces||$0.57 each|
|10000 + pieces||$0.52 each|
|For discount information or inquiring about larger quantity pricing, click here|
LBM-x2 series waterproof LED module strings. Each module has 2 wide viewing angle 110 degree High Flux LEDs. PVC design housing with 2 mounting screw holes and included double sided adhesive foam tape. 3-1/4 inch wires between each module. 12VDC operation. Quantity ordered will be wired together on a string with 100 modules maximum per strand.
RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.
LED Module Strings
- Sign Cabinets
- Channel Lights
- Cove LED Lighting
- Edge Lit Signs
- Canopy Illumination
- High power 3528SMD LEDs
- IP68 Waterproof rating
- Constant current LED modules
- Double sided adhesive foam tape
- 3-1/4 inch wires between each module
|LBM-x2 series Sign Modules use 3mm and 5mm High Flux Piranha LEDs with 90° viewing angle - SELECT LED COLOR TO MATCH SIGN PLASTIC COLOR|
|Beam Angle||110 degree|
|Current Draw @ Operating Voltage ||20mA|
|Current Draw per Foot||60mA|
|Water Resistance||Waterproof IP68|
|LED Lifetime||20000 Hours|
|Number of LEDs in Unit||2 LEDs|
|LED Type||3mm High Flux|
|LEDs per Segment||2|
|Length (in)||1.3in (0.11ft)|
|Module Length||111.7 mm|
|Price Per Foot||2.85|
|Standards And Certifications||ISA Approved/RoHS Compliant/UL Recognized|
|Suitable for Vehicles||No|
|Power Consumption||0.2 Watts|
|UL File Number||E357849|
|Operating Voltage Range||12 VDC|
Dimensions: 4.53" (12cm) x 1.04" (3cm) x 1.04" (3cm)
All specifications are subject to change without notice.
1. Current Draw is used to size fuses and wire for a circuit. Current draw is the amount of energy consumed by an LED or LEDs in an electrical circuit at a specific voltage, measured in amps (A) or milliamps (mA).
|Part NO||Total Length||Strip Width||Emitting Color||CCT / Wavelength |
CCT is used to express the color or shade of white light. The Correlated Color Temperature is the measure of the color appearance of the light emitted from a light source, measured in degrees kelvin (K). The CCT rating is a general 'warmth' or 'coolness' measure of its appearance. Wavelength is used to express a specific color of light other than whites. Wavelength is the portion of the visible spectrum that the human eye can detect, between 380 and 700 nanometers (nm). When trying to match an existing bulb color choose a replacement that most closely matches the CCT or wavelength of the original.
|Intensity Per Foot||Intensity||Radiant Power||Beam Angle |
Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.
|Max Run |
Max Run (or maximum run) is used to specify the total number of strips that can run in series without experiencing dimming due to voltage drop. When Max Run is reached, power wires for additional devices must be 'home run' directly back to the power source, starting a new run.
|LBM-G2||1.3in (0.11ft)||-||Green||520 nm||24559 mcd/ft||-||-||-||-||-||(Discontinued)|
|LBM-R2||1.3in (0.11ft)||-||Red||630 nm||8459 mcd/ft||-||-||-||-||-||(Discontinued)|
Use our Calculator
Use our calculator.
There are no reviews for this product yet.
Tell Us What You Think
Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.