store image

H16 LED Fanless Headlight/Fog Light Conversion Kit with Compact Heat Sink - 4,000 Lumens/Set

Part Number: H16-HLV4
16 photos

Product Details

  • Integrated heat sinks - no fans or bulky braided heat sinks
  • Internal drivers for simple installation
  • 4,000 Lumens of cool white (7200K) light/set
  • Can Bus compatible
  • Lifetime warranty
Discontinued
In Stock
$59.95 per Pair
Volume price as low as $53.95
Orders ship on or before  Monday 08/26/2019
Notes
  • Select options to see various notes.
Share: 

Overview

Increase your safety and visibility with this H16 LED headlight/fog light kit. The single-intensity LED headlight bulbs emit 4,000 lumens of cool white illumination per set (2,000 lumens each) and feature 3rd generation cooling technology. They have integrated heat sinks instead of short-lived fans or bulky braided heat sinks. This allows for a longer-lasting bulb and easier installation in tight spaces. They also have internal drivers, which eliminates the need to mount an additional part and locate an appropriate mounting spot. The compact bulbs last 13 times longer than halogen bulbs and 3 times longer than HID bulbs. LED arrays in each bulb are designed to mimic the filament in halogen bulbs—creating a closely matched beam style. These waterproof, CAN Bus compatible bulbs operate within a wide 9-32 VDC range. This long-lasting kit includes 2 LED headlight bulbs and 2 adapter plugs. Price per kit.

Warranties & Certifications
Lifetime
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
Applications
  • Low And High Beam Headlamps
  • Fog Light Replacement Bulbs
  • Motorcycle LED Headlight Bulbs
  • UTV LED Headlight Bulbs
  • ATV LED Headlight Bulbs
  • Snowmobile LED Headlight Bulbs
  • Powersport LED Bulbs
High-Power LED Headlights generate a lot of heat, which can be damaging to its circuitry. All SBL Headlight Bulbs come with heatsinking options that will protect and extend the life of your headlights. This means that LED Headlights require extra space behind the headlamp in order to function properly. Be sure to check this area under your hood before ordering.(H16 bulb shown)
H16-HLV4 Bulb Comparison Photo

Comparison Photos

Specifications

 Product Documentation
LED Headlight Kit - H16 LED Fanless Headlight Conversion Kit with Compact Heat Sink
LED Headlight Kit - H16 LED Fanless Headlight Conversion Kit with Compact Heat Sink

Accessories

Reviews

Overall Rating

Total Reviews

9

Tell Us What You Think

Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.

Sign In Required to Write a Review
Click here to sign in to your account
Name
Steven
Technical Level
Expert
Part Number
H16-HLV4
Reviewed On
01/29/18

Absolutely Insane!!

Bought these to match my LED Headlights(from Superbrightled.com)(H11) and wow!! was definitely amazed how bright these are! Being in a fog light housing which tend to be smaller then headlight housings they are insanely bright! I can drive at night without my headlights if i wanted to with these bad boys!! They are easy to install and are ridiculously bright!! Highly recommend replacing the stock fog light bulbs on any vehicle with these !

Helpful? Yes (6) No (0)

Name
Matt
Technical Level
Advanced
Part Number
H16-HLV4
Reviewed On
02/20/19

Very bright nice beam pattern

I purchased these for better lighting and wanted led as the halogens were almost the same price so I went with this, they go in like the factory bulb, except for it seems like they don’t “lock” with the snaps at the top and bottom like the factory bulbs, one has vibrated out from plowing and it seem like you have to press in the top and bottom clip while putting it in the housing and push slightly so it will “lock” into place as if there is slack in the plastic clip on the led bulb, other wise they are a fantastic light bright very good pattern and give the extra lighting and it’s a nice deep white and clarity is exceptional. The light goes far on the sides to light up areas your headlights don’t reach and far enough forward that it adds extra light to your headlights pattern increasing the brightness as I also have led light for headlights and they both go very well together, you want extra lighting to help see on the sides and the front for an extra boost then these are for you.

Helpful? Yes (1) No (0)

Name
bogie
Technical Level
Advanced
Part Number
H16-HLV4
Reviewed On
12/10/18

Nice - but...

Application 12 Ford Escape fog lights. BTW - be nice if reviewers would ID their vehicle

A pain to get the OEM bulbs out. Bigger pain to get SBL H16-HLV4 in. Ended up taking the fog light lens out to be able to properly seat the H16-HLV4. With the lens still in the bumper, not enough room to maneuver to get enough leverage. There IS enough room for the heat sink to clear

Unfortunately, the H16-HLV4 DID NOT work with the stock wiring, apparently not 'CANBus compatible' for the Escape

Bench tested in the lens connected directly to a 12v battery. Seemed to work great - the light pattern appears to be almost exactly that of the OEM incandescent

A call to SBL tech support - indicated the H16-LWC "LED Warning Canceller for H16 LED Headlight Bulb Conversion Kit" would be needed adding $34.95

Ultimately, it won't matter - creating my own wiring harness to remove the fogs from vehicle wiring to have them always on as DRL & on with high beams

Helpful? Yes (0) No (0)

Name
Patrick
Technical Level
Average
Part Number
H16-HLV4
Reviewed On
08/01/19

Name
jeffrey
Technical Level
Average
Part Number
H16-HLV4
Reviewed On
01/13/19

A must for fog lamps and mud

I upgraded my fog lamps on my 2011 Silverado 1500. Now I need the low beam LED, lol. Every other LED bulb either used a fan or required huge loops of heatsink material. The shape and design makes these easy to clean and care for. Very snug fit, a good thing. I had to tape the plug connection because I did not like the hold my vehicle's lock design allowed, not the bulbs fault. Light output, well, my low beams need replacing because they look horrible now. looking forward to installing the same type for my headlights.

Helpful? Yes (0) No (0)


Send us your Feedback