RF Touch Color Remote for MiLight or Waterproof RGB/RGBW Controllers

Part Number: MZ-RGB-REMOTE

Product Details

  • Works with waterproof or MiLight RGB or RGBW LED controllers
  • Dynamic or static color modes
  • Customized color, brightness, or speed settings
  • Individual zone control
Discontinued
In Stock
$17.95 ea.
Volume price as low as $13.46
Orders Ship Today!  7 Hours and 10 Minutes remaining
Notes
  • Select options to see various notes.

Overview

Use this wireless RF remote with Waterproof RGB or MiLight RGB or RGBW controllers for LED strip light operation or with compatible LED smart bulbs and RGBW flood lights. Choose from thousands of color options with the touch-activated color-selection wheel, or select pure white. Control speed, brightness, and dynamic or static color modes from up to 98' away in open air. The remote also has 4 zone-control buttons for lights in different areas.

2 Years
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
FCC
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.
RoHS Compliant

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Mi-Light LED Series
RF Touch Color Remote for MiLight or Waterproof RGB/RGBW Controllers - MZ-RGB-REMOTE
Parts Include
Wireless Remote
1. Master On(-)/Off(O)
A master On(-)/Off(O) control for all zone-linked RGB(W) light strips. Also activates the “Master” function, which allows the remote to control the RGB(W) light strips of all zones. If a zone is currently active, pressing the master On(-) button restores the "Master" function to the remote.
2. Color Selection Ring
Directly selects color along a circular spectrum. To obtain white light only, keep the “Zone On” (|) button depressed until the light changes to a steady bright white.
3. Selection LED Indicator
Flashes once to indicate when a command has been selected.
remote
remote
4. Brightness Touch Slider - Increase(Right Side)/Decrease(Left Side)
Increases(right side) or decreases(left side) the brightness level. Changing the active mode resets the brightness level to full.
5. Mode Start/Scroll(M)
Modes feature different color combinations, light transitions, and patterns, with 9 distinct modes. This button initiates the Mode function and scrolls through the modes in ascending order.
6. Mode Speed - Increase(S+)/Decrease(S-)
Increases (S+)/decreases(S-) the tempo of the mode pattern currently active
7. Zone On(|)/Off(O) - Zones 1-4
Allows up to four “zones” (i.e. channels) of RGB(W) light strips to be separately linked and controlled by the remote. Pressing one of the Zone On(|) buttons activates that zone; commands will affect only lights in that zone. Once linked to a zone, lights remain linked until they are unlinked. Steadily depressing the Zone On(|) button restores the lights in that zone to white.
Modes List
Mode Description
1 Six Color Fade In/Out Red, Yellow, Green, Cyan, Blue and Purple fade in and out in a continuous repeating cycle.
2 White Fade In/Out White fades in and out continuously.
3 RGBW Fade In/Out Red, Green, Blue and White fade in and out in a continuous repeating cycle.
4 Seven Color Flash Red, Green, Blue, Yellow, Purple, Cyan and White cycle in set pattern with flashing transitions.
5 Disco Random Pattern Red, Green, Blue, Yellow, Purple, Cyan and White cycle at random with flashing transitions.
6 Red Fade In/Out with 3 Flashes Red increases to full brightness then flashes 3 times.
7 Green Fade In/Out with 3 Flashes Green increases to full brightness then flashes 3 times.
8 Blue Fade In/Out with 3 Flashes Blue increases to full brightness then flashes 3 times.
9 All Pattern Mode All 8 patterns above cycle through and repeat.
Set-Up Instructions
Remote
  1. Install 2 AAA batteries (not included) in the wireless remote.
Controller
  1. Make sure power to the controller is disconnected.
  2. Using a small flathead screwdriver, loosen the five clamp screws on the underside of the controller.
  3. Matching light strip wires to the labeled slots on the end of the controller, insert wires and tighten clamp screws, as shown below.
  4. Turn power on and wait until RGB(W) light strip illuminates. If no illumination occurs, check light strips and wiring connections.
  5. The RGB(W) light strip is ready for linking to the wireless remote.
remote
Safety
  • DO NOT use with wall dimmers, relays or other control circuits.
  • DO NOT install with power applied to controller.
  • DO NOT expose the remote or controller to direct or indirect moisture.
Linking Lights to Remote Zones
RGB(W) light strips are controlled exclusively by the multi-zone RF remote via the controller.
Linking a Light to a Remote
1. Switch off the main power supply to the light.
2. Restore power and within 3 seconds, choosing one of the "Zone On" (|) buttons, depress the button until the light begins flashing. It will flash white 2 times, indicating that the light is now linked to that numbered zone and can be controlled via the remote.
linking
Activating a Zone
To activate a specific zone, depress the "Zone On" (|) button. The zone is now active and remote commands will only affect lights linked to that zone.
Unlinking a Light to the Remote
  1. Determine which zone the light is linked to. This can be done by testing the Zone On/Off controls for each zone on the remote.
  2. Switch off the main power supply to the light.
  3. Restore power and within 3 seconds, depress one of the "Zone On" (|) buttons until the light flashes 10 times, indicating that the light has been unlinked.
An unlimited number of RGB(W) light strips can be linked to a zone. All the lights linked to that zone will display the commands entered on the wireless remote. Conversely, a single RGB(W) light strip can be linked to multiple remotes. When the light is unlinkedv, it will be unlinked to all remotes. Note: The wireless remote operates using radio frequency. The remote controller’s use is not restricted by normal obstructions such as walls, doors, etc. Once programmed they can be installed anywhere in range of the remote (up to 65 ft. or 20m).
2 Years
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
FCC
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.
RoHS Compliant

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Mi-Light LED Series

Specifications

Accessories

Reviews

Overall Rating

Total Reviews

2

Tell Us What You Think

Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.

Sign In Required to Write a Review
Click here to sign in to your account
  • Name
    MIKE
  • Technical Level
    Advanced
  • Part Number
    MZ-RGB-REMOTE
  • Reviewed On
    06/15/18

not the easiest controller to use and set up.

This controller is, if you read the set up instructions carefully, is tuff to set up when you have RGB strips that are not on the same power supply. Also the batteries wear out quickly. Would not be using this again unless all the strips are on the same PS. There also should be some indication what mode it is in out of the 9 that it can provide. A good place to start when operating is to press the mode button until you reach the DISCO function, now you would know where you are at.

Was this review helpful?
00

  • Name
    Jeffrey
  • Technical Level
    Advanced
  • Part Number
    MZ-RGB-REMOTE
  • Reviewed On
    12/15/15

Quick and easy

Connects up to associated lights right away. Very easy to configure and use. And have a very fast response time. The color wheel is fantastic and the different modes are fun. The instruction guide that comes with it is very informative.

Was this review helpful?
00


Send us your Feedback