🎃 Halloween 15% Off Sale! Use promo code GHOST18 during checkout. 🎃

100 Watt LED Flood Light Fixture - 3000K/4000K/6000K - 250 Watt MH Equivalent - 12,000 Lumens

Part Number: FLC4-x100
16 photos
Select LED Color:
Whites
Cool 6000KNatural 4000KWarm 3000K
Discontinued
Clearance
Was $179.95
Now $164.88 ea.
Volume price as low as $123.66
Orders Ship Today!  8 Hours and 48 Minutes remaining
Notes
  • Select options to see various notes.

Overview

This LED flood light emits a wide 110° beam of cool, natural, or warm white illumination for landscape lighting, parking lot lighting, tree uplighting, flagpole lighting, and architectural wall washing. The powerful LED light emits 12,000 lumens for ample outdoor illumination and operates within a wide 90-277 VAC range. At 120 volts, the LED light consumes just 100 watts. It replaces 250-watt high-intensity discharge (HID) lights with comparable output. The weatherproof LED fixture is constructed of heavy-duty die cast aluminum with an integral heat sink and a tempered glass lens. This LED flood light is also equipped with a UL-Recognized constant-current driver. An adjustable mounting bracket allows you to direct illumination where it's needed. The LED fixture is designed to last 3 times longer than HID fixtures.

7 Years
Super Bright LEDs, Inc. offers a 7-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
LM-79
Products that are LM-79 certified have been tested for photometric and electrical data by an Environmental Protection Agency (EPA) recognized laboratory. The Illuminating Engineering Society of North America (IES) created LM-79-08—Approved Method: Electrical and Photometric Measurements of Solid-State Lighting Products—to establish guidelines and procedures for the testing of solid-state lighting (SSL) products such as LED fixtures. Procedures are listed for luminous flux, electrical power, luminous intensity distribution, and chromaticity. See documentation section under specifications for available report.
ETL Listed
A product that bears an ETL-Certified label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.
SAA
Standards Australia (SAA) is a company that establishes guidelines and rules known as Standards. In an effort to create a sustainable environment, these Standards are designed to ensure that products are safe and function consistently. Products with an SAA label were tested and comply with set Standards.
CE
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
RoHS Compliant

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Compact series
100 Watt LED Flood Light Fixture - 3000K/4000K/6000K - 250 Watt MH Equivalent - 12,000 Lumens - FLC4-x100
 Applications
LED Landscape Lighting
Architectural Lighting
Billboard Lighting
LED Sign Lighting
Building Facade Lighting
LED Security Lights
LED Flagpole Lighting

The FLC4-x100 has an operating voltage range of 90~277 VAC
Operating Voltage Range
90~277 VAC

LEDs in FLC4-x100 will last 50000 Hours
Longevity
Will Outlast Dozens of Metal-Halide Bulbs

Lumens
High Output
12,000 Lumens of white light

LEDs
Powder Coat
Durable, Scratch Resistant Powder Coat Finish

Sealed Housing
Weatherproof and Keeps Dust Out

LEDs
110° Beam
Wide light dispersion for large areas

LEDs
Durable Housing
Heavy-Duty die cast aluminum housing

LEDs
Heat Sink
Designed to keep the LEDs cool for longer life

7 Years
Super Bright LEDs, Inc. offers a 7-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
LM-79
Products that are LM-79 certified have been tested for photometric and electrical data by an Environmental Protection Agency (EPA) recognized laboratory. The Illuminating Engineering Society of North America (IES) created LM-79-08—Approved Method: Electrical and Photometric Measurements of Solid-State Lighting Products—to establish guidelines and procedures for the testing of solid-state lighting (SSL) products such as LED fixtures. Procedures are listed for luminous flux, electrical power, luminous intensity distribution, and chromaticity. See documentation section under specifications for available report.
ETL Listed
A product that bears an ETL-Certified label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.
SAA
Standards Australia (SAA) is a company that establishes guidelines and rules known as Standards. In an effort to create a sustainable environment, these Standards are designed to ensure that products are safe and function consistently. Products with an SAA label were tested and comply with set Standards.
CE
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
RoHS Compliant

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Compact series

Specifications

Swipe left to see additional specifications
Part NOBeam Angle
CCT / Wavelength
MCD per LEDIntensityLED Wattage
Current Draw @ Operating Voltage
Total Power Consumption
CRI
Price Ea.Lumen Per Dollar
FLC4-WW100-3000 K-12000 lm-800 mA96 W84$164.8872.78 lumen/dollar
FLC4-NW100-4000 K-12400 lm-826 mA98 W73(Discontinued)75.21 lumen/dollar
FLC4-CW100-6000 K-12000 lm-800 mA96 W73(Discontinued)72.78 lumen/dollar
 Product Documentation
PDF Download FLC4-NW100 LM-79 Report IES Download FLC4-NW100 IES File
 About Photometric Reports

Standards And Certifications: LM-79

Products that are LM-79 certified have been tested for photometric and electrical data by an Environmental Protection Agency (EPA) recognized laboratory. The Illuminating Engineering Society of North America (IES) created LM-79-08—Approved Method: Electrical and Photometric Measurements of Solid-State Lighting Products—to establish guidelines and procedures for the testing of solid-state lighting (SSL) products such as LED fixtures. Procedures are listed for luminous flux, electrical power, luminous intensity distribution, and chromaticity.


Standards And Certifications: LM-80

Products that are LM-80 certified have been tested for lumen depreciation by an Environmental Protection Agency (EPA) recognized laboratory. The Illuminating Engineering Society of North America (IES) created LM-80-08 to establish guidelines and procedures for the testing of solid-state lighting (SSL) products, such as LED packages, modules, and arrays (not complete fixtures). Procedures are listed for testing lumen maintenance over a period of time.


IES Files & Their Uses

IES (Illuminating Engineering Society) files contain photometric data, such as color, intensity, and beam pattern for luminaires. This data can be utilized by architectural and engineering programs for modeling and design purposes.

Current draw at different VAC levels
90 VAC 1088 mA (1.09 Amps) 240 VAC 408 mA
120 VAC 826 mA 277 VAC 354 mA
220 VAC 445 mA
FLC4-x100 - 100 Watt High Power LED Flood Light Fixture - 12,000 Lumens
100 Watt High Power LED Flood Light Fixture - 12,000 Lumens

Accessories

Reviews

Overall Rating

Total Reviews

1

Tell Us What You Think

Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.

Sign In Required to Write a Review
Click here to sign in to your account
  • Name
    Daryl
  • Technical Level
    Average
  • Part Number
    FLC4-CW100
  • Reviewed On
    10/24/16

very new

good quality apperance solid construction as described

Was this review helpful?
26


Send us your Feedback