BuckPuck DC Driver - Wire Leads, No Trim Pot

Part Number: 3023-D-N-x
4 photos
Select Output Rated Current:
350mA500mA700mA1000mA
Discontinued
Clearance
$13.88 ea.
Volume price as low as $10.41
Orders Ship Today!  4 Hours and 37 Minutes remaining
Notes
  • Select options to see various notes.

Overview

BuckPuck™ LED Power Modules are a line of true current regulated drivers for powering LEDs. The BuckPuck™ line of LED drivers are the ideal choice for powering all types of high-brightness and high-power LED packages and LED arrays. The line of BuckPuck LED drivers exhibit high efficiency and require no external current limiting resistors or additional heat sinking for operation.

Specifications

Accessory Type Driver
Connection Type Pigtail
Dimensions
Dimming Control[1] None
Driver Type Buck, Constant Current
Input Voltage DC 5 ~ 32 VDC
Output Voltage DC 0 ~ 32 VDC
Type LED Driver
Package Weight: 1.45oz (0.04kg)
Package Dimensions: 2.52" (6cm) x 1.59" (4cm) x 1.59" (4cm)
In the past, constant-current LED power sources were referred to as LED drivers, and constant voltage LED power sources were called LED power supplies. Today, the terms are interchangeable. All specifications are subject to change without notice.
1. TRIAC Dimming: Triode for alternating current (TRIAC) dimming is used to control high-voltage dimmable power supplies such as Magnitude Dimmable Power Supplies. These dimmable power supplies work by varying the power on the AC input side of the power supply by means of a TRIAC dimmer. This change in power on the AC input side will vary the voltage on the DC output side and control the intensity of the LEDs. TRIAC dimmers are common hardware store and household dimmers, which include brand names such as Lutron and Leviton.

Pulse-Width Modulation Dimming: Pulse-width modulation (PWM) dimming can be used to control dimmable power supplies such as Mean Well HLG Series and Mean Well LPF Series. This type of dimming control adjusts the output current based on the duty cycle. As the duty cycle increases, current will increase and the LEDs will be brighter. Conversely, if the duty cycle decreases, the current will decrease and the LEDs will be dimmer. Pulse-width modulation for these drivers is based on a 10V signal level with a frequency between 100Hz~3KHz. The MCBRF-4A or MLD-5A are compatible for this application.

Resistive Dimming: Resistive dimming can be used to control dimmable power supplies such as Mean Well HLG Series. The resistance can be fixed or variable. If a fixed level of dimming is required, a simple resistor is all that is needed to dim the LEDs to a particular level. If a varying dimmable level is desired, a potentiometer can serve this purpose. By changing the resistance value of the potentiometer, the output current of the power supply changes, and the LED intensity changes. Controlling a single power supply will require a 100K ohm potentiometer for 100% intensity (100K ohm) to approximately 10% intensity (10K ohm) based on where the wiper is positioned.

1-10V Dimming: 1-10V dimming can be used to control dimmable power supplies such as 12V Mean Well HLG-40~240 Series or 24V Mean Well HLG-40~240 Series. This type of dimming control is an older style for compatible dimmable power supplies and is being replaced with 0-10V dimmer control. 1-10V dimming control works by varying the voltage from 1-10 VDC. A 10-volt signal on the dimming wire will allow for maximum current to flow to the LEDs for maximum intensity. A 1-volt signal on the dimming wire allows 10% of the current to flow from the power supply, which generates approximately 10% of the maximum intensity for the LEDs.

0-10V Dimming: 0-10V dimming can be used to control dimmable power supplies such as 12V Mean Well HLG-600 Series or 24V Mean Well HLG-600 Series. This type of dimming control is the most popular and newest style for compatible dimmable power supplies. 0-10V dimming control works by varying the voltage from 0-10 VDC. A 10-volt signal on the dimming wire will allow for maximum current to flow to the LEDs for maximum intensity. A 0.6-volt signal on the dimming wires allows 6% of the current to flow from the power supply—dimming the LEDs to approximately 6% of full intensity. 0-10V dimmers can be found here.
Swipe left to see additional specifications
Part NOInput Voltage ACOutput Rated CurrentOutput Voltage ACOperating TemperatureStorage Temperature (Tstg)Price
3023-D-N-3505 ~ 32 VAC350 mA---$13.88
3023-D-N-5005 ~ 32 VAC500 mA---$13.88
3023-D-N-7005 ~ 32 VAC700 mA---$13.88
3023-D-N-10005 ~ 32 VAC1000 mA---(Discontinued)
3023-D-N-x - BuckPuck DC Driver - Wire Leads, No Trim Pot
BuckPuck DC Driver - Wire Leads, No Trim Pot

Reviews

Overall Rating

There are no reviews for this product yet.

Total Reviews

0

Tell Us What You Think

Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.

Sign In Required to Write a Review
Click here to sign in to your account

Send us your Feedback