Select Kit:
4 Piece (24 in.)8 Piece (48 in.)
In Stock
Starting at $59.95 ea.
Volume price as low as $44.96
Orders Ship Today!  14 Hours and 48 Minutes remaining
  • Select options to see various notes.


These plug-and-play, color-changing LED Motorcycle Engine Lighting Kits come with everything needed for custom motorcycle engine lighting on Harley Davidsons, choppers, and cruisers and can be used for fairing lighting on sport bikes and street bikes. The color-changing kits include waterproof (4- or 8-piece) flexible RGB LED strips with plug-and-play connectors, connector hub, waterproof RGB controller with in-line fuse and LC4 connector, and 1 RF remote control key fob with multiple dynamic color-changing or single-color modes with adjustable speed and brightness levels.

A brake override function allows the controller to interrupt color modes and activate only red while braking; power-cycle mode retention returns your light strips to the previous mode. Also use your light strips as a tail light by setting the controller to a dim red color; when brakes are applied, the controller will activate an intense red. Strips mount using 3M VHB adhesive backing and can be cut into 3-LED segments. See individual installation guides for a list of installation accessories. Operates within a 10-15V DC range.

Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Motorcycle LED Lighting Kit - Multi-Strip Remote Activated RGB Color Changing Kit - ALKWx-RGBx-MC
Please check your state and local laws before installing the kit. Every state has different policies and procedures for aftermarket accessories. Super Bright LEDs, Inc. is not responsible for any fines that you may incur while using the motorcycle engine lighting kit. This kit is designed for off road use only.
 Cutting Instructions
scissor icon Cut strips to appropriate length using scissors on lines indicated with scissor icon. Strip can only be cut on these lines, when cutting, be sure to cut the strips in groups of LEDs that are in multiples of 3. Cutting the strip in the wrong location will cause the strip to fail, and void warranty.
  • Observe strip polarity, reversing strip polarity may damage strips
  • Power strips only from 12 VDC source
  • Never use with other than included 3 Amp/12 Volt fuse, do not exceed 3 Amp maximum load. If you are blowing this fuse, it means you have a short somewhere in your wiring. Using a larger fuse could result in a fire and damage to wiring and product.


Beam Angle 120 degree
Dimmable Yes
Finish Black
Emitting Color RGB
LED Lifetime 50000 Hours
LED Type 5050 SMD
LEDs per Segment 3
Operating Temperature -20~+50 °C
PC Rated No
Polarity Sensitive Yes
Remote Control Radio Frequency (RF)
Segment Length 1.97in
Special Features Complete Kit, Plug and Play, Remote Control
Standards And Certifications FCC, RoHS Compliant
Strip Width 13mm (0.51in)
Suitable for Vehicles Yes
Type Flexible Light Strips
Operating Voltage 10~15 VDC
Wavelength 465 nm, 520 nm, 634 nm
Wire Length 14.5in(36.8cm)
All specifications are subject to change without notice.
Swipe left to see additional specifications
Part NONumber of LEDs in UnitIntensityRadiant PowerBeam Angle
Current Draw
Max Run
Current Draw @ 12 Volts DC
ALKWx-RGBx-MC - Motorcycle LED Lighting Kit - Waterproof Multi-Strip Remote Activated RGB Color Changing Kit
ALKWx-RGBx-MC - Motorcycle LED Lighting Kit - Waterproof Multi-Strip Remote Activated RGB Color Changing Kit



Overall Rating

Total Reviews


Tell Us What You Think

Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.

Sign In Required to Write a Review
Click here to sign in to your account
  • Name
  • Technical Level
  • Part Number
  • Reviewed On

8 strips for the win

I put 8 strips on my 900ss Ducati and it looks beautiful going down the road ...every color is bright...and the brake light change function is pretty cool it works when you have the LEDs off ...I've bought 2 sets of these so far for 2 projects well worth the money

Was this review helpful?

Send us your Feedback