Your browser does not have JavaScript enabled. This site requires JavaScript to function properly. For help enabling JavaScript, click here.

Back

Low Profile Surface Mount LED Profile Housing for LED Strip Lights - MICRO-ALU Series

Name: Low Profile Surface Mount LED Profile Housing for LED Strip Lights - MICRO-ALU Series
SKU: B1888
Availability: InStock

Part Number: B1888

Write a Review

8 photos

CLICK FOR FULL GALLERY

Aluminum Surface Mount LED Profile Housing MICRO-ALU Series

Click to Enlarge Click to view from all angles

Photo Description

Tap to cycle through images

Tap & Hold for zoomable view

Tap & Hold to view from all angles

Aluminum Surface Mount LED Profile Housing MICRO-ALU Series

Aluminum Surface Mount LED Profile Housing MICRO-ALU Series with clear lens (1548), frosted lens (1547), mounting clips (1072), and end caps (1060, 1059, 1448, 1430)

Aluminum Surface Mount LED Profile Housing MICRO-ALU Series with flexible light strip (not included) and standard frosted lens

Aluminum Surface Mount LED Profile Housing MICRO-ALU Series with illuminated flexible light strip (not included) and standard frosted lens

How To Install A LED Light Strip In To a 1 Meter Klus Channel And Mount. Mounting accessories sold separately. See accessories tab for options.

MICRO-ALU series Surface Mount Aluminum Klus LED Profile Housing MICRO-ALU: Custom Cabinet Installation How To.

Klus B1888 - MICRO-ALU series Surface Mount Aluminum LED Profile Housing

ECO series Corner Mount Aluminum Klus LED Profile Housing installed with LED light strip to enhance sword collection.

Select Length:

39.4in (3.28ft)

78.7in (6.56ft)

Select Lens:

Frosted

Clear

Not Included

Discontinued

In Stock

Starting at $7.95 ea.

Volume price as low as $6.36

See All Discount Pricing

Entire order discounts do not apply

E-mail me when this product is back in stock

Qty

Add to Cart

Add to Wish List

Orders Ship Today! 6 Hours and 6 Minutes remaining

Notes

Select options to see various notes.

Overview

The KLUS MICRO-ALU series LED aluminum profile housing is great for bookshelf lighting, cupboard lighting, cove lighting, cabinet shelf lighting, desk hutch lighting, ceiling lighting, and more. This low-profile surface-mount LED channel provides a professional mounting solution for flexible, rigid, or linear LED strip lights that measure up to 11 mm wide. The 1m (39-3/8") or 2m (78-3/4") profile housing is constructed of sturdy aluminum. A clear lens is available, or choose a frosted lens for smooth lighting with no visible hot spots. See similar SBL Pro Slim Aluminum Profile Housing or premade LED Linear Light Bar Fixture.

Warranties & Certifications

Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More

Series

Specifications Print Specifications

Dimensions

View Dimensional Drawings

Finish

Silver

Mount Type

Surface

Standards And Certifications

RoHS Compliant

Strip Width

11.2mm (0.44in)

Type

Aluminum Housing

All specifications are subject to change without notice.

Swipe left to see additional specifications

	Part NO	Number of LEDs in Unit	Total Length	LED Color	CCT / Wavelength CCT / Wavelength	Lumen Per Foot	Brightness Brightness For best results, the LED color should be the same as the lens color. If the bulb is behind a clear lens, use the appropriate color for turn and brake light functions. When installed in a housing that has a matching colored lens, red and amber bulbs will appear brighter than white LED bulbs - even though they have lower lumen outputs. As an example: a red lens will filter out all but the red portion of light from a bulb, so if the light being emitted from the bulb is all red, none or very little light will be blocked by the lens. The light from a white LED bulb contains very little light in the red portion of the visible spectrum, so most of the light that contributes to its higher lumen value would be filtered out by a red lens. This makes the white bulb appear dimmer than the red bulb.	Beam Angle Beam Angle Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.	Operating Voltage Range	Current Draw Per Foot	Max Run Max Run Max Run (or maximum run) is used to specify the total number of strips that can run in series without experiencing dimming due to voltage drop. When Max Run is reached, power wires for additional devices must be 'home run' directly back to the power source, starting a new run.	Current Draw Current Draw Current Draw is used to size fuses and wire for a circuit. Current draw is the amount of energy consumed by an LED or LEDs in an electrical circuit at a specific voltage, measured in amps (A) or milliamps (mA).	Wattage	CRI CRI	Wattage Total	Price Ea.	Operating Temperature
-	B1888-1M	-	39.4	-	-	-	-	-	-	-	-	-	-	-	-	$7.95	-
-	B1888-2M	-	78.7	-	-	-	-	-	-	-	-	-	-	-	-	$15.95	-
-	B1888-1M-C	-	39.4	-	-	-	-	-	-	-	-	-	-	-	-	$16.90	-
-	B1888-1M-F	-	39.4	-	-	-	-	-	-	-	-	-	-	-	-	$16.90	-
-	B1888-2M-C	-	78.7	-	-	-	-	-	-	-	-	-	-	-	-	$33.90	-
-	B1888-2M-F	-	78.7	-	-	-	-	-	-	-	-	-	-	-	-	$33.90	-

All specifications are subject to change without notice.

Product Characteristics

The extrusion made from high quality aluminum is designed for flexible or rigid LED strips that are 8 - 10mm wide. One of the accessories offered for the extrusion are covers that shade and protect LEDs inside the profile. These covers come in three versions: cover-K is a standard frosted or transparent lens, HS frosted or transparent lens, cover-S transparent focusing lens which allows for a 60 degree light beam pattern. Covers are made of polycarbonate. Standard polypropylene end caps, electricity conductive end caps and mounting brackets (made of steel, zinc or chrome finish) are used for the extrusion as supplementary accessories. End caps protect the extrusion from dust and other undesirable elements, which can make LED strips dirty and consequently degrade their light output. The extrusion can be mounted to surfaces with the use of double sided adhesive tape or mounting brackets. The mounting bracket guarantees easy and secure mounting of the extrusion to a desired surface. It can also work as connector between two extrusions.

Product Dimensions

Applications

The extrusion with the LED light source is mostly used as interior lighting, especially to light cabinets, stairs, glass cases, or as a decoration light for a niche in drywall ceilings.

Advantages

Small dimensions, sturdy frame, easily release heat, and overall environmentally friendly.

Documentation

Download B1888 Data Sheet

Anodized Aluminum Surface Mount LED Profile Housing MICRO-ALU

Klus B1888 - MICRO-ALU series Surface Mount Aluminum LED Profile Housing

Anodized Aluminum Surface Mount LED Profile Housing MICRO-ALU

Klus B1888 - MICRO-ALU series Surface Mount Aluminum LED Profile Housing

Accessories

Reviews

Overall Rating

Total Reviews

Rating Breakdown

100%

(3 Reviews)

Tell Us What You Think

Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.

Back to Reviews

Click here to sign in to your account

Sort By:

Reviews: