Same Day Shipping
Super Bright LEDs warehouses are centrally located in the U.S. If your order is placed Monday through Friday before 3 p.m CDT, we will ship it that day. If you find that you need to return or exchange a product, we offer hassle-free 30 day returns and exchanges inside and outside of the U.S.
32W High Output LED Bulb - 4,600 Lumens - E26/E27 Commercial & Residential Retrofit Light - 100W Metal Halide Equivalent - 4000K
Features
- 144 Lumens per watt
- UL Listed
- 120-277 VAC
Overview
This high-output LED bulb fits standard E26/E27 screw-base sockets. The powerful 32-watt bulb emits 4,600 lumens of natural white light. It uses significantly less energy than comparable 100-watt metal-halide (MH) bulbs and lasts 3 times longer. This LED bulb is designed for indoor use or for use in weatherproof housings. It has an aluminum LED-cooling heat sink for increased longevity and is equipped with a frosted lens to reduce glare. The bulb operates on 120-277 VAC. Use it for residential and commercial applications, such as garages, workshops, basements, outdoor post top lights, warehouses, and more.
- Workshop
- Garages
- Shops
- Basements
Specifications
Reviews
Overall Rating
Total Reviews
Tell Us What You Think
Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.
great light output but..
I would give these 5 stars but the Chinese quality control is terrible, out of 4, 2 had defective threads, returned for 2 more, one of the new ones worked for 5 min then went out, tapping made it flicker - they are sending another new one - save the shipping box when you first try these, make sure you give a gentle tap and run for an hour to test; hope the good ones don't crap out prematurely; Super bright leds is very good about returns so I can't fault them on this...
Poor quality
Poor quality construction. The metal base spun right off of the light upon first installation. Don’t waste your time or money on these.
Response from Super Bright LEDs:
Big and Bright
1. This bulb is oversized. Check the dimensional drawings to make sure that you have the clearance for it.
If the bulb will still fit your fixture, then it's an amazing bulb for the price. Seriously, they're amazingly bright for the price. The cooling also appears to be generous. I wouldn't use them in an enclosed fixture (not that you could find one big enough), but anywhere else this bulb is just about the most light you can get for the price.
Replaced 200W incandescents.
Purchased to replace fifteen 200W incandescents in a church sanctuary. Increased the brightness and considerably reduced power consumption (our 2 primary goals). So far, very pleased with the results. The third goal was to increase bulb life. Hoping the 25,000 hour life of the LED's holds.....time will tell on that one.
A great replacement.
I bought these to replace T8 8ft fixtures. They were dual 75watt lights and gave off considerable light. There were six spread even along a 60 foot bay 12 ft high. These LEDs are rated at 32 watts so with the old lights I was using roughly 900 watts of power and with the new lights it is 200 watts. Buying all the LED 8ft replacement lights was to expensive and wouldn't save that much power. A solid replacement for the 8 footers but they are different and simply not as illuminating since they are a single bulb. I feel they are actually brighter and do a good job for me. As to the quality issue all worked and I was cautious screwing them in. They are big and if you wanted to you could easily overtighten them.
