200W LED Explosion Proof Light for Class 1 Division 2 Hazardous Locations - 400W MH Equivalent - 4300K - 18,100 Lumens

Part Number: EPL-x200
12 photos
Discontinued
Out of Stock, Expected 08/01/18 Backorder Available
$899.95 ea.
Volume price as low as $674.96
Orders Ship Today!  44 Minutes remaining
Notes
  • Select options to see various notes.

Overview

This Explosion-Proof LED Light is engineered for Class 1 Division 2 hazardous locations and high particulate areas such as granaries, mills, and mines, locations with gasoline vapors like gas stations, airplane hangars, or auto shops, and environments where petrochemical vapors exist. The LED light is certified as UL844 and meets National Electric Code—NFPA 70, article 500—requirements in the U.S. for Class 1 Div 2 (groups A, B, C, and D) hazardous locations. The light fixture also meets ATEX Zone 1 and Zone 21 requirements in the EU for the likely conditions of combustible gas, mists, dust, and vapors. A vibration-resistant die cast aluminum housing prevents the release of sparks from internal components, and 84 LEDs (3535 SMD) are protected by a tempered glass lens. LEDs in the waterproof LED flood light emit 18,125 Lumens of powerful cool white (4300K) illumination and produce a wide 120° beam pattern. This 200-watt LED Explosion-Proof Light replaces 400-watt metal-halide (MH) lights with comparable output and lasts 5 times longer. The LED fixture operates within a wide 100-277 VAC range. When mounting, a conduit must be used to maintain safety certifications. Can be directly pole mounted with conduit or mounted to a wall or ceiling using both bracket and conduit. Also available in a 100-watt version.

5 Years
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
ATEX
This product meets health and safety requirements set forth by the European Union (EU) Directive 1999/92/EC regarding the classification of hazardous zones in the workplace. It also meets the requirements of Directive 2014/34/EU regarding the sale of equipment in the EU market that will be used in explosive atmospheres.
UL844
UL 844 requirements cover fixed and portable luminaires for installation and use in the following hazardous (classified) locations in accordance with the National Electrical Code, NFPA 70:
  • Class I, Divisions 1 and 2, Groups A, B, C, and D
  • Class II, Division 1, Groups E, F, and G
  • Class II, Division 2, Groups F and G
  • Class III, Divisions 1 and 2
  • Class I, Zones 1 and 2, Groups IIA, IIB, IIB plus Hydrogen, and IIC, and Zone 20, 21 and 22

These requirements cover luminaires for use only under the following atmospheric conditions:
  • A minimum ambient temperature of minus 25°C (minus 13°F)
  • An oxygen concentration not greater than 21 percent by volume; and
  • A nominal barometric pressure of one atmosphere
UL Listed
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
LM-79
Products that are LM-79 certified have been tested for photometric and electrical data by an Environmental Protection Agency (EPA) recognized laboratory. The Illuminating Engineering Society of North America (IES) created LM-79-08—Approved Method: Electrical and Photometric Measurements of Solid-State Lighting Products—to establish guidelines and procedures for the testing of solid-state lighting (SSL) products such as LED fixtures. Procedures are listed for luminous flux, electrical power, luminous intensity distribution, and chromaticity. See documentation section under specifications for available report.
SAA
Standards Australia (SAA) is a company that establishes guidelines and rules known as Standards. In an effort to create a sustainable environment, these Standards are designed to ensure that products are safe and function consistently. Products with an SAA label were tested and comply with set Standards.
CE
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
RoHS Compliant

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

200W LED Explosion Proof Light for Class 1 Division 2 Hazardous Locations - 400W MH Equivalent - 4300K - 18,100 Lumens - EPL-x200
 Applications
Granary Lighting Mill Lighting
Farm Building Lighting LED Mining Lights
Wastewater And Sewage Plant Lighting Military And Aerospace Facilities
Gas And Oil Refinery Lighting Repair Shop Lighting
Paint Booth Lighting Gas Station Lighting

Lumen
Multi-Volt Operation
100-277 VAC

LEDs
Low Wattage
Environment Friendly, Low Energy Draw

Lumen
High Output
18,125 Lumens of Natural White Light

LEDs
Replacement for Metal-Halide Fixtures
Equivalent to 400W Metal-Halide Bulbs

Lumen
120° Flood Light
Effective Allover Illumination for your Workspace

Sealed Housing
Water and Dust Proof Housing

5 Years
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
ATEX
This product meets health and safety requirements set forth by the European Union (EU) Directive 1999/92/EC regarding the classification of hazardous zones in the workplace. It also meets the requirements of Directive 2014/34/EU regarding the sale of equipment in the EU market that will be used in explosive atmospheres.
UL844
UL 844 requirements cover fixed and portable luminaires for installation and use in the following hazardous (classified) locations in accordance with the National Electrical Code, NFPA 70:
  • Class I, Divisions 1 and 2, Groups A, B, C, and D
  • Class II, Division 1, Groups E, F, and G
  • Class II, Division 2, Groups F and G
  • Class III, Divisions 1 and 2
  • Class I, Zones 1 and 2, Groups IIA, IIB, IIB plus Hydrogen, and IIC, and Zone 20, 21 and 22

These requirements cover luminaires for use only under the following atmospheric conditions:
  • A minimum ambient temperature of minus 25°C (minus 13°F)
  • An oxygen concentration not greater than 21 percent by volume; and
  • A nominal barometric pressure of one atmosphere
UL Listed
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
LM-79
Products that are LM-79 certified have been tested for photometric and electrical data by an Environmental Protection Agency (EPA) recognized laboratory. The Illuminating Engineering Society of North America (IES) created LM-79-08—Approved Method: Electrical and Photometric Measurements of Solid-State Lighting Products—to establish guidelines and procedures for the testing of solid-state lighting (SSL) products such as LED fixtures. Procedures are listed for luminous flux, electrical power, luminous intensity distribution, and chromaticity. See documentation section under specifications for available report.
SAA
Standards Australia (SAA) is a company that establishes guidelines and rules known as Standards. In an effort to create a sustainable environment, these Standards are designed to ensure that products are safe and function consistently. Products with an SAA label were tested and comply with set Standards.
CE
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
RoHS Compliant

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Specifications

Beam Angle 120 degree
Color Temperature 4300 K
Comparable Wattage 400 Watts Metal-Halide
Current Draw 1568mA
Dimensions
Efficacy 97 lm/w
Emitting Color Natural 4300K
Finish Gray
IP Rating Waterproof IP68
Intensity 18125 Lumen
LED Lifetime 50000 Hours
LED Type 3535 SMD
Lens Type Tempered Glass
Material Aluminum
Number of LEDs in Unit 156 LEDs
Operating Temperature -30~+50 °C
Operating Voltage Range 100~277 VAC
Replacement for 400 Watt MH
Standards And Certifications ATEX, CE, LM-79, RoHS Compliant, SAA, UL Listed, UL844
Type Explosion Proof
UL File Number E366643, E483625 (Class 1, Division 2, Groups A, B, C, D)
Watts 200 Watts
Weight 23 lbs
   
Package Weight: 25lb 6.4oz (11.52kg)
Package Dimensions: 18" (46cm) x 18" (46cm) x 9" (23cm)
All specifications are subject to change without notice.
 Product Documentation
PDF EPL-x200 Spec Sheet PDF EPL-x200 User Manual PDF LM-79 Report For EPL-NW200
IES Download EPL-x200 IES File    
 About Photometric Reports

Standards And Certifications: LM-79

Products that are LM-79 certified have been tested for photometric and electrical data by an Environmental Protection Agency (EPA) recognized laboratory. The Illuminating Engineering Society of North America (IES) created LM-79-08—Approved Method: Electrical and Photometric Measurements of Solid-State Lighting Products—to establish guidelines and procedures for the testing of solid-state lighting (SSL) products such as LED fixtures. Procedures are listed for luminous flux, electrical power, luminous intensity distribution, and chromaticity.


Standards And Certifications: LM-80

Products that are LM-80 certified have been tested for lumen depreciation by an Environmental Protection Agency (EPA) recognized laboratory. The Illuminating Engineering Society of North America (IES) created LM-80-08 to establish guidelines and procedures for the testing of solid-state lighting (SSL) products, such as LED packages, modules, and arrays (not complete fixtures). Procedures are listed for testing lumen maintenance over a period of time.


IES Files & Their Uses

IES (Illuminating Engineering Society) files contain photometric data, such as color, intensity, and beam pattern for luminaires. This data can be utilized by architectural and engineering programs for modeling and design purposes.

Current draw at different VAC levels
100 VAC 2 Amps 220 VAC 909 mA
120 VAC 1667 mA (1.66 Amps) 240 VAC 833 mA
200 VAC 1 Amp 277 VAC 722 mA
EPL-x200 - 200 Watt LED Explosion Proof Light for Class 1 Division 2 Hazardous Locations - 16,200 Lumens
200 Watt LED Explosion Proof Light for Class 1 Division 2 Hazardous Locations - 16,200 Lumens

Accessories

Reviews

Overall Rating

There are no reviews for this product yet.

Total Reviews

0

Tell Us What You Think

Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.

Sign In Required to Write a Review
Click here to sign in to your account

Send us your Feedback