Halloween 10% Off Sale! Use promo code GHOST19 during checkout.
store image

185W LED Explosion Proof Light for Class 1 Division 2 Hazardous Locations - 400W MH Equivalent - 4000K - 18,125 Lumens

Part Number: EPL-xW200
12 photos
Discontinued
In Stock
$899.95 ea.
Volume price as low as $809.95
Orders ship on or before  Tuesday 10/15/2019
Notes
  • Select options to see various notes.
Share: 

Overview

This Explosion-Proof LED Light is engineered for Class 1 Division 2 hazardous locations and high particulate areas such as granaries, mills, and mines, locations with gasoline vapors like gas stations, airplane hangars, or auto shops, and environments where petrochemical vapors exist. The LED light is certified as UL844 and meets National Electric Code—NFPA 70, article 500—requirements in the U.S. for Class 1 Div 2 (groups A, B, C, and D) hazardous locations. The light fixture also meets ATEX Zone 1 and Zone 21 requirements in the EU for the likely conditions of combustible gas, mists, dust, and vapors. A vibration-resistant die cast aluminum housing prevents the release of sparks from internal components, and 84 LEDs (3535 SMD) are protected by a tempered glass lens. LEDs in the waterproof LED flood light emit 18,125 Lumens of powerful natural white (4000K) illumination and produce a wide 120° beam pattern. This 185-watt LED Explosion-Proof Light replaces 400-watt metal-halide (MH) lights with comparable output and lasts 5 times longer. The LED fixture operates within a wide 100-277 VAC range. When mounting, a conduit must be used to maintain safety certifications. Can be directly pole mounted with conduit or mounted to a wall or ceiling using both bracket and conduit. Also available in a 100-watt version.

Warranties & Certifications
5 Years
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
ATEX
This product meets health and safety requirements set forth by the European Union (EU) Directive 1999/92/EC regarding the classification of hazardous zones in the workplace. It also meets the requirements of Directive 2014/34/EU regarding the sale of equipment in the EU market that will be used in explosive atmospheres.
UL844
UL 844 requirements cover fixed and portable luminaires for installation and use in the following hazardous (classified) locations in accordance with the National Electrical Code, NFPA 70:
  • Class I, Divisions 1 and 2, Groups A, B, C, and D
  • Class II, Division 1, Groups E, F, and G
  • Class II, Division 2, Groups F and G
  • Class III, Divisions 1 and 2
  • Class I, Zones 1 and 2, Groups IIA, IIB, IIB plus Hydrogen, and IIC, and Zone 20, 21 and 22

These requirements cover luminaires for use only under the following atmospheric conditions:
  • A minimum ambient temperature of minus 25°C (minus 13°F)
  • An oxygen concentration not greater than 21 percent by volume; and
  • A nominal barometric pressure of one atmosphere
UL Listed
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
LM-79
Products that are LM-79 certified have been tested for photometric and electrical data by an Environmental Protection Agency (EPA) recognized laboratory. The Illuminating Engineering Society of North America (IES) created LM-79-08—Approved Method: Electrical and Photometric Measurements of Solid-State Lighting Products—to establish guidelines and procedures for the testing of solid-state lighting (SSL) products such as LED fixtures. Procedures are listed for luminous flux, electrical power, luminous intensity distribution, and chromaticity. See documentation section under specifications for available report.
SAA
Standards Australia (SAA) is a company that establishes guidelines and rules known as Standards. In an effort to create a sustainable environment, these Standards are designed to ensure that products are safe and function consistently. Products with an SAA label were tested and comply with set Standards.
CE
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Applications
  • Granary Lighting
  • Mill Lighting
  • Farm Building Lighting
  • LED Mining Lights
  • Wastewater And Sewage Plant Lighting
  • Military And Aerospace Facilities
  • Gas And Oil Refinery Lighting
  • Repair Shop Lighting
  • LED Shop Lights
  • Paint Booth Lighting
  • Gas Station Lighting
Comparison Of Explosion Proof Light Fixtures
 
Current Product Store Image
EPL-xW200
Color Temperature
Max Lumen
NEC - Hazardous Locations
Volts Typical
Comparable Wattage
Wattage
Price
  More Information More Information

Specifications

EPL-x200 - 200W LED Explosion Proof Light for Class 1 Division 2 Hazardous Locations - 400W MH Equivalent - 4300K - 18,1
200W LED Explosion Proof Light for Class 1 Division 2 Hazardous Locations - 400W MH Equivalent - 4300K - 18,100 Lumens

Accessories

Reviews

Overall Rating

There are no reviews for this product yet.

Total Reviews

0

Tell Us What You Think

Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.

Sign In Required to Write a Review
Click here to sign in to your account

Send us your Feedback