12 Volt LED Car Bulbs
LED Light Strips & Light Bars
LED Household Lighting
LED Landscape Lighting
Off Road LED Light Bars
LED Truck Lights
LED Work Lights
Emergency Vehicle & Strobe Lights
LED Accent Lighting
Motorcycle LED Lights
Boat, RV, and Other Lighting
LED Flashlights & Flashlight Bulbs
LED Grow Lights & Aquarium Lights
Industrial LED Lighting
Hotel & Casino Lighting
Waterproof LED Light Strips - Outdoor LED Tape Light with 18 SMDs/ft., 3 Chip SMD LED 5050
- Select options to see various notes.
|25 - 49 pieces||$147.20 each|
|50 - 99 pieces||$139.45 each|
|100 - 249 pieces||$123.96 each|
|250 - 499 pieces||$116.21 each|
|500 + pieces||$108.47 each|
|For discount information or inquiring about larger quantity pricing, click here|
Add to Wishlist
Adding product to your Wishlist
There was a problem adding this product to your list. Make sure that you have chosen the necessary options (length, color, etc) and try again
If the problem persists, you can contact us directly
This product has been discontinued.
SE-WFLS-X3 series waterproof flexible LED light strip with 300 3-Chip 5050SMD LEDs, 3x brighter than standard 3528SMD LEDs. 5 meter (197 in) waterproof flexible light strips, can be cut into 3-LED segments. 12VDC operation. Available in Standard Density version. Dimmable - See compatible LED dimmers.
Standards and Certifications
Waterproof LED Light Strips with Single Color LEDs
Outdoor LED Tape Light with 18 LEDs per Foot
3-Chip 5050 SMD LEDs
- Back lighting
- Pool LED lights
- Boat/Marine LEDs
- Stair/Walkway Lighting
- Accent decor lighting
- Automotive accent LED lighting
- 300 3-Chip 5050SMD LEDs
- 120 degree
- 5130 Lumen
- 12VDC operation
- Adhesive backing
- Dimmable - See our Dimmer Selection
- Can be cut into 3-LED segments
|WFLS-x300X3 Flexible Light Strips use 5050SMD LEDs with 180° viewing angle (width: 12.70mm x height: 5.76mm)|
|Beam Angle||120 degree|
|Water Resistance||Waterproof IP67|
|LED Lifetime||30000 Hours|
|Number of LEDs in Unit||300 LEDs|
|LED Type||5050 SMD|
|LEDs per Segment||3|
|Length (in)||196.9in (16.40ft)|
|Lumen (Max)||5130 Lumen|
|Price Per Foot||10.35|
|Standards And Certifications||CE/FCC/ROHS Compliant|
|Strip Width||12.5mm (0.49in.)|
|Suitable for Vehicles||Yes|
|Type||Flexible Light Strips|
|Operating Voltage Range||9~14.8 VDC|
Dimensions: 500cm(196.85") x 1.27cm(0.5") x 0.576cm(0.23")
All specifications are subject to change without notice.
2. Max Run (or maximum run) is used to recommend the total number of devices that can run in succession without experiencing dimming due to excessive voltage drop in a series circuit (end to end). When Max Run is reached, power wires for additional devices must be 'home run' directly back to the power source, starting a new run.
|Part NO||Total Length||Emitting Color||CCT / Wavelength |
CCT is used to express the color or shade of white light. The Correlated Color Temperature is the measure of the color appearance of the light emitted from a light source, measured in degrees kelvin (K). The CCT rating is a general 'warmth' or 'coolness' measure of its appearance. Wavelength is used to express a specific color of light other than whites. Wavelength is the portion of the visible spectrum that the human eye can detect, between 380 and 700 nanometers (nm). When trying to match an existing bulb color choose a replacement that most closely matches the CCT or wavelength of the original.
|Intensity Per Foot||Intensity||Radiant Power||Beam Angle |
Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.
|Current Draw per Foot @ 12 Volts DC |
Current Draw Per Foot is used to size power supplies, normally converted to watts per foot. This is equated using total wattage divided by number of linear feet. Current draw per foot is the amount of current consumed by an LED or LEDs in an electrical circuit per linear foot at a specific voltage, measured in milliamps (mA) or watts (W).
|Current Draw @ 12 Volts DC |
Current Draw is used to size fuses and wire for a circuit. Current draw is the amount of energy consumed by an LED or LEDs in an electrical circuit at a specific voltage, measured in amps (A) or milliamps (mA).
|SE-WFLS-CW300X3||196.9in (16.40ft)||Cool White||10000 K||313 lm/ft||5130 lm||-||-||193 mA|
|SE-WFLS-WW300X3||196.9in (16.40ft)||Warm White||3500 K||307 lm/ft||5040 lm||-||-||182 mA|
Maximum Flexibility Precaution
Use our Calculator
Use our calculator.
Use our Calculator
Use our calculator.
There are no reviews for this product yet.
Tell Us What You Think
Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.