Color Chasing RGB LED Light Strip - LED Tape Light with 9 SMDs/ft. - 3 Chip RGB SMD LED 5050

Part Number: NDC-RGB150
Out of Stock (Discontinued)
Was $109.95
Now $99.95 ea.
Orders ship on or before  Tuesday 05/29/2018
  • Select options to see various notes.


This Color-Chasing RGB LED Light Strip is perfect for cabinet lighting, under-cabinet lighting, cove lighting, bias lighting, store window lighting, bookshelf lighting, showcase lighting, cupboard lighting, or for other indoor applications where space is limited. The flexible 16.4' strip has 150 LEDs (5050 SMD) with an output of up to 360 lumens. Colors and color modes (color-chase, fade, and strobe) are adjustable with the Dream Color Chasing RGB LED Controller with Wireless RF Remote. The non-weatherproof light strip operates at 12VDC and is designed to last 40,000 hours. It can be cut into 3-LED segments and installs easily with a peel-and-stick adhesive backing.

Important Notes - Please read before purchasing:
  1. Non-Weatherproof, Indoor use only unless contained within weatherproof housing or used in conjunction with weatherproofing products
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
flexible light strips
  • Backlighting and cove LED lighting
  • Bookshelf lighting
  • Showcase lighting
  • Cabinet lighting and under-cabinet lighting
  • Store window lighting
  • Off grid lighting
  • Trade show lighting
  • LED Display Case Lighting
  • Bias Lighting

12-Volt Operation
Designed for Low Voltage Applications

High Efficiency
High Efficiency
Environment Friendly, Low Energy Draw

NDC-RGB150 outputs up to 360 lumens
High Output
Up To 360 Lumens of Light Output

RGB Color Select
Selectable Colors
Customizable Color Output

Cut Into Strips
Cut Into Strips
Can Be Easily Cut Into 3-LED Segments

Adhesive Backing
Adhesive Backing
Easy To Install Peel-And-Stick Backing

LEDs in NDC-RGB150 will last 40000 Hours
Will Outlast Dozens of Incandescent Bulbs

Light Strip Can Be Dimmed For Varying Levels of Intensity


Beam Angle 180 degree
Connection Type LC4 Connector, LC4 Female, LC4 Male
Connector Type LC4
Current Draw[1] 2910mA
Current Draw per Foot 178mA
Dimmable Yes
IP Rating Non-Weatherproof
LED Lifetime 40000 Hours
Number of LEDs in Unit 150 LEDs
LED Type 5050 SMD
LEDs per Segment 3
Total Length 196.9in (16.40ft)
Lumen 360 Lumen
Lumen Per Foot 22 lm/ft
Lumen Per LED 2.4
Max Run[2] 3
MCD per Foot 3490 mcd/ft
MCD Per LED 382
Millicandela[3] 57300mcd
Polarity Sensitive Yes
Price Per Foot 7.31
Special Features Plug and Play
Strip Width 12mm (0.47in)
Suitable for Vehicles No
Total Power Consumption 34.9 Watts
Type Flexible Light Strips
Operating Voltage Range 12 VDC
Wattage per Foot 2.1 Watts
Wavelength 470 nm, 525 nm, 626 nm
Wire Length 2.5in(6.4cm)
Package Weight: 4.85oz (0.14kg)
Package Dimensions: 7.8" (20cm) x 2.77" (7cm) x 2.77" (7cm)
All specifications are subject to change without notice.
1. Current Draw is used to size fuses and wire for a circuit. Current draw is the amount of energy consumed by an LED or LEDs in an electrical circuit at a specific voltage, measured in amps (A) or milliamps (mA).
2. Max Run (or maximum run) is used to specify the total number of strips that can run in series without experiencing dimming due to voltage drop. When Max Run is reached, power wires for additional devices must be 'home run' directly back to the power source, starting a new run.
3. Millicandela is a unit of measurement for the light output of LEDs. Candela is one of the seven base units of the International System of Units. It is a unit of Luminous Intensity (I), or Light Power per Steradian (SR), while steradian is a unit of 3D cone angle with which the projected area of 1 steradian over a sphere with a 1m radius, is 1 square meter. One thousand millicandela equals one candela or approximately one candle power.
Remote Modes
No. Mode Extra Controls
1 Static Red
2 Static Blue
3 Static Violet
4 Static Green
5 Static Yellow
6 Static Cyan
7 Static White
8 Seven-color instant change Speed Control
9 Seven-color fade change Speed Control
10 Three-color (RGB) instant change Speed Control
11 Red segment chase inward to controller Speed Control
12 Blue segment chase outward from controller Speed Control
13 Green segment chase inward to controller Speed Control
14 White segment chase outward from controller Speed Control
15 Seven-color strobe Speed Control
16 Seven-color running chase outward from controller Speed Control
17 Seven-color running chase inward to controller Speed Control
18 Seven-color running chase outward and inward Speed Control
19 Seven-color segment chase outward from controller Speed Control
20 Seven-color segment chase inward to controller Speed Control
21 Automatic random pattern and color selections
RGB-NDC21: 12VDC Dream Color RGB LED Controller
The model RGB-NDC21 controller is designed to be used with the NDC-RGB150 series RGB Flexible Light Strip. Control the sequence mode, and speed of 14 different dynamic color changing or chasing patterns from the RF Remote Controller. The Dream-Color systems controls each RGB LED in the strip independently.
Mounting Bracket Dimensions
  • VERY IMPORTANT: Supply voltage for Controller is 12 Volts DC, do not exceed
  • VERY IMPORTANT: Supply voltage for NDC-RGB150 series Light Strips is 12 Volts DC
  • Connect according to the drawing below
  • Do not exceed 80% of Power Supply capacity when calculating Power Supply size to use in your system.
  • Strip can be trimmed down to length by cutting it every 3 LEDs.
Typical Wiring Schematic
NDC-RGB150 - Color Chasing LED Light Strip with Multi Color LEDs - LED Tape Light with 9 SMDs/ft., 3 Chip RGB SMD LED 50

Photos & Videos

Accessories & Power Supplies


Overall Rating

There are no reviews for this product yet.

Total Reviews


Tell Us What You Think

Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.

Sign In Required to Write a Review
Click here to sign in to your account

Send us your Feedback