- Not sold in pairs, price per bulb.
- This bulb is oversize, please see dimensions under Specifications tab.
Overview
LED replacement bulbs can fit numerous vehicle applications such as dome lights, map lights, trunk lights, hood lights and footwell lights. This 4210 LED festoon bulb replaces a variety of traditional bulbs including 4210 and 6451 bulbs. The 42-mm bulb has 6 LEDs (5050 SMD) on a rectangular PCB (printed circuit board). LEDs are mounted to one side of the board for direct 120° illumination with no wasted light. Festoon base for easy plug-and-play installation. The energy-efficient bulb operates within a wide 10-30V DC range and is designed to last 50,000 hours on your car, truck, SUV, or van—42 times longer than incandescent bulbs. Available in blue, green, amber and red. Not sold in pairs. Price per bulb.
Specifications
Bulbs have Plus and Minus (like batteries) and will only work when polarity is correct. If bulb does not work when installed, turn it around in the socket.
Polarity Sensitive (NO)
Bulbs do not have Plus and Minus and will work either way installed in the socket.
| Part NO | CCT / Wavelength | Brightness | Current Draw @ Operating Voltage | Price Ea. | Product Weight | Operating Temperature | |
|---|---|---|---|---|---|---|---|
| 4210-CWHP6-DI | 6000 | 95 lm | 0.17A | (Discontinued) | - | - | |
| 4210-WWHP6 | 3100 | 60 lm | 0.16A | (Discontinued) | - | - | |
| 4210-BHP6-DI | 470 nm | 850 mcd | 0.12A | (Discontinued) | - | - | |
| 4210-RHP6-DI | 626 nm | 1500 mcd | 0.09A | (Discontinued) | - | - | |
| 4210-AHP6-DI | 592 nm | 1500 mcd | 0.10A | $0.48 | - | - | |
| 4210-GHP6-DI | 525 nm | 2250 mcd | 0.13A | (Discontinued) | - | - |
Accessories
Reviews
Overall Rating
Total Reviews
Tell Us What You Think
Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.
excellent light
I bought a couple of these (Warm White) with their mounting sockets to use in a 12v solar lighting system. I use them on my front and back porch and they really give off a lot light for the 163ma draw that they have. I used a large white yogurt container as a lampshade and the lights come on at dusk and go off after 4-6 hours, however I have it set with the charge controller. I would recommend these for various 12v lighting situations where you need good light but small draw on your batteries. I also like that I can use these with a 24v system and get an even smaller draw on the batteries.
