store image

Tunable White LED Controller w/ Wireless RF Remote - 7 Amps/Channel

Part Number: MCBRF-VCT7
2 photos

Features

  • Adjust brightness and color temperature
  • RF (radio frequency) FCC Certified
  • Up to 168W per channel
  • Compatible with LED light strips operating between 5-24 VDC
  • Operates light strip from 50+ feet away in open air
Discontinued
In Stock
$29.95 ea.
Volume price as low as $26.95
Orders ship on or before  Friday 05/20/2022
Notes
  • Select options to see various notes.
Share: 

Overview

This tunable white LED controller with wireless RF remote is perfect for operating your tunable white LED light strips. The LED remote has adjustable brightness (2%-100%) and color temperature controls, and it can operate your light strip from greater than 50' away in open air. Power-cycle mode retention allows your light strip to return to the brightness level and/or color temperature that was selected before it was powered off. The waterproof controller has a maximum load capacity of 7 amps per channel and is compatible with LED light strips that operate within a 5-24V DC range. Use 1 remote to control an infinite number of receivers, and pair up to 5 remotes with one receiver. Includes remote battery.

2 Years
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
FCC
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.
Remote Functions
  1. Turn On/Standby: Press 'I' key to turn on unit or press 'O' key to turn off. Retains last setting between power off and power on.
  2. Color Temperature Adjust: To control color temperature, press 'C /T+' key to increase color temperature by increasing the cool white channel output power and decreasing warm white channel output power. Press ' C /T-' key to lower color temperature by increasing warm white channel output power and decreasing cool white channel output power. The overall brightness will remain unchanged when adjusting color temperature.
  3. Brightness Adjust: Press 'BRIGHT+' key to increase brightness and 'BRIGHT-' to decrease brightness. The color temperature will remain unchanged when adjusting brightness.
  4. Brightness Shortcut: Press one of the shortcut buttons to set the relative shortcut brightness level. 3 shortcut keys '10%' , '50%' and '100%' are available.
  5. Color Temperature Shortcut: Press one of the shortcut buttons to directly select the relative color temperature. 3 shortcut keys 'Warm, 'Neutral' and 'Cold' are available. 'Warm' and 'Cold' is pure warm or cool output, 'Neutral' is half warm and half cool output.
  6. Wireless Remote LED Indicator: Flashes blue when remote is operating to indicate that the remote is functioning properly.
  7. Power Supply Wiring: The controller/power supply operates at 5-24VDC. The red wire is positive(+) and the black wire is negative(-) as indicated on the controller housing. Make sure the power voltage matches the LED strip. Incorrect voltage may damage the LED strip requirement.
  8. LED Output Wiring: The black cable on the output side should be connected to LED positive, the white cable should be connected to cool white LED's negative and the yellow cable connected to warm white LED's negative.
  9. Status Indicator: The is a full color status indicator. It displays all working statuses of the controller. It indicates different events as following:
    • Blue: normal working.
    • Short single white flash: new command executed.
    • Long single white flash: reach mode or color cycle edge.
    • Long single yellow flash: reach speed or brightness limit.
    • Red flash: overload protected.
    • Yellow flash: overheat protected.
remote remote

Specifications

Accessories & Power Supplies

Reviews

Overall Rating

Total Reviews

16

Tell Us What You Think

Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.

Sign In Required to Write a Review
Click here to sign in to your account
Name
Alan
Technical Level
Average
Part Number
MCBRF-VCT7
Reviewed On
05/11/18

LED Conltroller

Works as described. I completely tested on workbench before installing LED's under kitchen cabinets. Very easy installation once I figured where I was going to run the wiring to the LED's.

Helpful? Yes (1) No (0)

Name
WSN
Technical Level
Advanced
Part Number
MCBRF-VCT7
Reviewed On
10/29/20

High Quality Controller

Easy to wire up. Controller itself is small and easily concealed. Remote works well and has a well thought out button layout. Quick and simple to select light intensity and color temperature to suit conditions.

Helpful? Yes (0) No (0)

Name
James
Technical Level
Average
Part Number
MCBRF-VCT7
Reviewed On
03/06/21

Fast service, correct part and corrected problem.

Helpful? Yes (0) No (0)

Name
john
Technical Level
Average
Part Number
MCBRF-VCT7
Reviewed On
11/22/21

This remote works well with multiple receivers this is because of its on and off switch

Helpful? Yes (0) No (0)

Name
Fred
Technical Level
Advanced
Part Number
MCBRF-VCT7
Reviewed On
09/28/20

Great remote

Programmed two of these together, works perfectly!

Helpful? Yes (0) No (0)


Send us your Feedback