
2 photos
In Stock
$11.95
ea.
Volume price as low as $10.75
Orders Ship Today! 5 Hours and 3 Minutes remaining
View More
Overview
RGB-A4 series three channel RGB amplifier. Maximum 4 Amps per channel/12 Amps total. Increases the load capability and extend the signal of the universal RGB controllers. Required if exceeding the maximum load capability of any universal RGB controller. 12~24VDC operation.
Important Notes - Please read before purchasing:

Documentation
Safety Information
- Supply voltage of this product is 12~24 Volts DC, do not exceed
- Shorting output wires my cause damage to amplifier
- Always observe proper polarity when connecting power and load
- For indoor use only - this product is not waterproof or weatherproof
Universal single color LED dimmer can dim any 12VDC or 24VDC LED products from 0 to 100 percent using Pulse Width Modulation (PWM) circuit.
Knob control for full intensity adjustment range. Maximum Load is 8 Amps, has removable screw terminal connector for power in and out connections.
Amplifier Installation
1. Power Supply Wiring
Power supply needed for operation.
Power supply needed for operation.
2. Auxiliary Power Supply Connections
Red (positive) and black (negative) wires can be joined with butt connectors, wire nuts, or wire terminals. Additional power wires continue to the LED controller. Power wires are also needed to run the amplifier.
Red (positive) and black (negative) wires can be joined with butt connectors, wire nuts, or wire terminals. Additional power wires continue to the LED controller. Power wires are also needed to run the amplifier.
3. LED Controller Wiring Colors
LED controller has four wire inputs that connect to the strip: blue, green, red, and black. Wires are screwed into the controller for a secure connection.
LED controller has four wire inputs that connect to the strip: blue, green, red, and black. Wires are screwed into the controller for a secure connection.
4. RGB Strip Wiring
The RGB strip needs RGB wires soldered to their respective colors: white, red, green, and black. These wires are screwed in the amplifier's input terminal.
The RGB strip needs RGB wires soldered to their respective colors: white, red, green, and black. These wires are screwed in the amplifier's input terminal.
5. Amplifier Wiring
The amplifier has RGB inputs and RGB outputs. Power screws into (positive +) and (negative -) slots in the amplifier. Wires are screwed into the amplifier for a secure connection. The amplifier is now setup and will carry the signal from the controller.
The amplifier has RGB inputs and RGB outputs. Power screws into (positive +) and (negative -) slots in the amplifier. Wires are screwed into the amplifier for a secure connection. The amplifier is now setup and will carry the signal from the controller.

View More
Specifications
IP Rating
Non-Weatherproof
Input Connection Type
Screw Terminals
Standards And Certifications
RoHS Compliant
Package Weight: 5.7oz (0.16kg)
Package Dimensions: 5.2" (13cm) x 1.88" (5cm) x 1.88" (5cm)
All specifications are subject to change without notice.
Specifications
Supply Voltage: DC 12~24V
Max load current: 4 Amps/channel (12 Amps total)
Output: 3 Channel
Static power consumption: < 1 Watt
Output Power: 144 Watts
Function: Amplify RGB Signals using PWM
Product size: (L)98 Χ (W)45 Χ (H)18 mm
Net Weight: 100g
Working temperature: -20~60°C

View More
Accessories & Power Supplies

View More
Reviews
Overall Rating
There are no reviews for this product yet.
Total Reviews
0
Tell Us What You Think
Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.