store image

Outdoor RGB LED Strip Light Kit - Color Chasing 12V LED Tape Light - Weatherproof - 16 Lumens/ft.

Part Number: SWDCK-RGB150
12 photos
In Stock
$44.95 / kit
Volume price as low as $40.45
Orders Ship Today!  5 Hours and 18 Minutes remaining
  • Select options to see various notes.


This complete Universal Weatherproof Color-Chasing RGB LED Light Strip Kit provides years of outdoor illumination on decks, patios, gazebos, walkways, driveways and railings but can also be used indoors. The flexible 16-1/2' strip has 150 RGB LEDs (5050 SMD) with an output of 264 lumens. Colors and color modes (color chase, flash, jump, meteor and static) are adjustable with the hand-held IR remote. The plug-and-play strip light uses a standard two-prong outlet and installs easily with a peel-and-stick adhesive backing. The silicone-encased strip is weatherproof for year-round outdoor use and is designed to last 50,000 hours. It operates within a 12-14.5V DC range and can be cut into 3-LED addressable segments. The kit includes 1 color-chasing RGB LED light strip, Dream-Color Dynamic controller (non-weatherproof) with 4 connectors and IR remote, 12V DC power supply (non-weatherproof) and mounting clips.

Warranties & Certifications
5 Years
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
UL Listed
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
  • Gazebo Lights
  • LED Landscape Lighting
  • LED Cabinet Lighting
  • Walkway Lighting
  • Retail Lighting
  • Patio Lighting
  • LED Display Case Lighting
  • LED Kitchen Lighting
  • Trade Show Lighting
  • Garden Lighting

 Installation Guide & Remote Functions 

Installation Diagram

Installation Diagram
  • Read all instructions prior to installation.
  • DO NOT connect LED strip directly to 120 VAC power. This kit requires the included power supply.
  • DO NOT connect more than one 16.5' section of light strips to the included power supply. Overloading the power supply may cause overheating, shorting, and possibly fire.
  • Be sure the power supply is not plugged into an outlet before connecting or disconnecting any of the kits components.
  • Always observe proper polarity when connecting power and load. Align white arrow on the controller’s cable to VCC symbol on LED strip.
Parts Included
  • 1 × 5m Flexible Light Strip (Weatherproof IP65)
  • 1 × IR Controller (Nonweatherproof IP20)
  • 1 × IR Remote
  • 1 × Power Supply (Nonweatherproof)
  • 4 × Solderless Interconnect
  • 2 × 4 Pin Connector
  • 1 × Double Sided Tape
  • 2 × Mounting Screws
  • PDF 1 × User Manual


Weatherproof Warning
  • The LED Light Strip included in this kit has an IP65 rating for weatherproof outdoor applications. Other components included in the kit are not suitable for outdoor use on their own. See product accessories for weatherproof housings and sealants.
Strip Specifications
Full Length 196.9in (16.40ft)
Section Length 10cm (3.94in)
Strip Width 10mm (0.39in)
Input Voltage 12VDC
Number of LEDs 150
LEDs per Segment 3
LED Color Color Chasing RGB
LED Type 5050 RGB SMD
LED Brand Epistar
LED Lifetime 50000 Hours
Signal Type SPI
IC Type TM1829
Water Resistance Weatherproof IP65
Beam Angle 120 degree
Intensity 264 Lumen (16 lm/ft)
Wavelength 470 nm/525 nm/626 nm
Strip Finish White
Polarity Sensitive Yes
Interconnect Length 12cm (4.7in)
Controller Specifications
Input Voltage 12VDC
Rated Current 5A Max
Wattage 36W Max
Water Resistance Non-weatherproof IP20
Remote Specifications
Type Infrared (IR)
Maximum Range Up to 9m (30'), line-of-sight
Battery Type 1 x CR2032
Power Supply Specifications
Input Voltage 100~240VAC
Input Frequency 50~60Hz
Output Voltage 12VDC
Output Current 2A Max
Total Power Consumption 19.2 Watts Max
Wire Length 151cm(59.5in)
Current Draw @ Operating Voltage 1600mA
Water Resistance Non-weatherproof
SWDCK-RGB150 - Outdoor RGB LED Strip Light Kit - Color Chasing 12V LED Tape Light - Weatherproof - 16 Lumens/ft.
Outdoor RGB LED Strip Light Kit - Color Chasing 12V LED Tape Light - Weatherproof - 16 Lumens/ft.



Overall Rating

Total Reviews


Tell Us What You Think

Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.

Sign In Required to Write a Review
Click here to sign in to your account
Technical Level
Part Number
Reviewed On


Cannot purchase an additional light strip
You have to purchase another kit to expand.
Additional light strip should be available as an accessory
What a ripoff!

Helpful? Yes (15) No (1)

Response from Super Bright LEDs:

Since this kit has a power supply that will not support additional strips nor will the strip support the current flow for additional strips, we do not offer options to accommodate a larger installation than what this kit was developed for.

However, for larger, custom installations, SBL carries a large selection of LED strips and accessories to meet your needs. Contact our Technical Support Team for assistance in putting together a system that will fulfill your projects desired effect.

Technical Level
Part Number
Reviewed On

This product is not set up for the use I needed. I'm an electrician, I prewire houses for under cabinet lights using a system sold locally that is similar to this one, but was unable to use this particular setup because there are 4 wires on the strip connectors and an LED strip has to be plugged into the special adapter you have at the remote transmitter. I would need a more basic setup for my use, I run 14-2 Romex to all the cabinet bottoms and need the strip tape to connect to that in multiple locations.

Helpful? Yes (0) No (0)

Send us your Feedback