LED Lighting for Everything
- Live ChatOffline
- Find an Invoice
- Track an Order
- Check Return Status
- Return/Exchange an Item
Phone and Chat Hours
Monday - Thursday 8:30am - 8pm CDT Friday 8:30am - 4pm CDT
Tech Support Hours
Monday - Friday 8:30am - 4pm CDTLocal Pickup Office Hours Monday - Friday 8:30am - 4pm CDT
Car Light Bulbs
LED Strip Lights & LED Bars
Industrial LED Lighting
Commercial LED Lighting
LED Home Lighting
LED Landscape Lighting
Off Road LED Light Bars
LED Auxiliary Work Lights
Commercial Truck LED Lights
Emergency Vehicle & Strobe Lights
LED Accent Lighting
Motorcycle LED Lights
RV LED Lights and Golf Cart Lights
Boat LED Lights
LED Flashlights & Flashlight Bulbs
Off-Grid LED Lighting
Specialty & Hobby
Hotel & Casino Lighting
LED Strip Light Kit with Multicolor LEDs - LED Tape Light with 9 SMDs/ft. - 3 Chip RGB SMD LED 5050
- Select options to see various notes.
|25 - 49 pieces||$137.70 each|
|50 - 99 pieces||$130.45 each|
|100 - 249 pieces||$115.96 each|
|250 - 499 pieces||$108.71 each|
|500 + pieces||$101.47 each|
|View discount information or inquire about larger quantity pricing|
- This kit is only to be used with the included 16ft. LED light strip. Additional strip added can cause damage to the included power supply.
This complete RGB LED strip light kit has everything needed for cabinet lighting, under-cabinet lighting, cove lighting, task lighting, bookshelf lighting, showcase lighting, cupboard lighting, bias lighting, trade show lighting, or other indoor applications where space is limited. The kit includes a 16-3/8' RGB LED light strip, RGB controller with RF remote, 2 LC4 to pigtail adapters, double-sided mounting squares, and a 12 VDC power adapter. The flexible strip light has 150 RGB LEDs (5050 SMD) with an output of 2,010 lumens. With the RGB controller and wireless RF remote, the light strip can provide dynamic color-changing and static color modes with speed and brightness control. This non-weatherproof light strip can be easily cut into 3-LED segments and installed with its peel-and-stick adhesive backing and LC4 connectors.
RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.
Color Changing LED Strip Kit
RGB LED Tape Light Kit Includes RGB LED Controller
with Remote and Power Supply
- LED Back Lighting
- Under cabinet lighting
- LED Task Lighting
- Display case lighting
- LED Accent Lighting
- Retail/sign LED lighting
- Automotive accent LED lighting
- Off grid lighting
Environment Friendly, Low Energy Draw
Up To 2010 Lumens Of Light Output
Light Strip Can Be Dimmed For Varying Levels Of Intensity
Can Be Easily Cut Into 3-LED Segments
Easy To Install Peel-And-Stick Backing
Light Color Can Be Selected Via Remote Control
Will Outlast Dozens of Incandescent Bulbs
Installation Guide & Remote Functions
Documentation And Specifications
- Applications: Direct access color selection and functions with dimmable and speed controls
- Function: Control 3 channel RGB LED products using wireless remote
- Operating Voltage: 12 Volts DC
- Connection Mode: Common Anode (+)
- Output: Three CMOS drain-open output
- Maximum Load Current: 4 Amps/channel (12 Amps total)
- Output Powwer: 114 Watts
- Overall Size: (L)114 X (W)64 X (H)25 mm
- Control Method: Wireless RF Remote Control
- Batteries Required: 27A, 12V battery for Remote (included)
- Modes: 14 total (8 static and 6 dynamic) see desc. below
- Operating Temperature: -20~60°C
- Only power with 12VDC Power Supply and connect to 12 Volt Light Strips or unit will be damaged. Our Compact 50Watt and 24 Watt Power Supplies will plug into DC IN jack on left side of unit. Our Enclosed Power Supplies can be direct wired to "+" and "-" terminals on removable Green connector on right side of unit.
- Wireless controller uses one 23A, 12V battery.
- Connect according to the included drawing and note that the Green Connectors can be unplugged from the unit.
- Red LED will come on when unit is receiving power, Green LED will flash when RF signal is received from handheld transmitter.
- UP and DOWN buttons will only work when unit is in one of the four color-changing (dynamic) modes.
- Each Controller has a handheld Remote matched to it and will only work with it's matched Remote. One Remote cannot operate multiple Controllers.
- Controller can control a maximum of 30 feet of our Flexible RGB LED Strip. Over 30 feet, the Strips have to connect with an amplifier to reinforce the transmission of signal. Use one RGB Amplifier for every 30 feet of additional LED Strips.
- Do not exceed 80% of Power Supply capacity when calculating Power Supply size to use in your system.
Basic Wiring Diagram
IP (Ingress Protection) Rating
|Current Draw @ Operating Voltage ||1855mA|
|Length (in)||196.9in (16.40ft)|
|Remote Control||Radio Frequency (RF)|
|SMD Density||9 SMDs/ft.|
|Special Features||Complete Kit|
|Standards And Certifications||FCC/ISA Approved/RoHS Compliant|
|Strip Width||10.15mm (0.40in)|
|Suitable for Vehicles||Yes|
|Operating Voltage Range||100~240 VAC|
Dimensions: 10.6" (27cm) x 5.95" (15cm) x 5.95" (15cm)
All specifications are subject to change without notice.
1. Current Draw is used to size fuses and wire for a circuit. Current draw is the amount of energy consumed by an LED or LEDs in an electrical circuit at a specific voltage, measured in amps (A) or milliamps (mA).
|Rated Current||4A x 3CH Max|
|Maximum Range||Up to 15m (50')|
|Battery Type||1 x 27A|
|Output Current||2A Max|
|Total Power Consumption||25 Watts Max|
Tell Us What You Think
Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.
Awesome customer service
I was excited to receive the kit. I was planning on installing the LED's under the toe kick of the galley kitchen in my RV. The set came quickly and it was packaged quite well. After unwinding the LED strip off the reel I hooked up the controller and powered up. The lights came right on and were flashing very quickly. I was disappointed that either the remote or the controller was faulty, I couldn't do a thing to change the rapid flashing.
Well, with one phone call to SuperBright the problem was accessed and another controller/remote was in transit. This gave me a day to complete the rest of the wiring while I was waiting. 24 hours later UPS made the delivery and the system control was at my finger tips. Well worth the $'s. Nice quality and super customer service.
All the members in my RV club are begging me to do a Super Bright install in their coaches.
I'm planning my next project, stand-by!
I needed some lights for my desk and this worked great. The installation was super easy and the remote control works perfect even from another room. It really sets off the desk and looks great in all of the colors.
I took away one star because the kit is actually more expensive than buying the items individual. I also wish there were more length options. I only needed 8 foot and had to order 16, but now I have extra for another project in the future.
Kitchen cabinet party light install by a novice
I initially purchased an LED strip light kit from a home warehouse store. Very disappointed that you could not cut the strip so I returned it. I spoke with Doug before purchasing this kit, he was fantastic and recommended this kit rather than one with chasing lights as the connectors were more forgiving and would not require soldering. The 16' strip easily allowed for one 8' above and the same length below my upper kitchen cabinets, with the lower strip interrupted for the microwave. Doug also recommended the exact connectors that I would need to bridge the microwave and connect both strips to the controller, which is then plugged into the same outlet as my microwave. I now love my kitchen even more. The pictures do not do it justice, the remote allows fade in/out of multiple color choices. I can also select white light for task lighting.
Outdoor LED Light Strips with White and Multicolor LEDs - Weatherproof LED Tape Light with 18 SMDs/ft. - 3 Chip RGBW LED 5050
Starting at $34.95
Deep Flush Mount Aluminum Profile Housing for LED Strip Lights - KLUS PDS4-K Series
Starting at $11.95
Customers Also Purchased
Smartphone or Tablet WiFi Compatible RGB Controller w/ RF Touch Color Remote - Dynamic Color-Changing Modes
Starting at $34.95
Mean Well LED Power Supply - AP series 12~35W Single Output LED Power Supply - 12V DC
Starting at $7.95
LED Strip Lights - LED Tape Light with 18 SMDs/ft. and LC2 Connector - 1 Chip SMD LED 3528
Starting at $7.95
Low Profile Surface Mount LED Profile Housing for LED Strip Lights - MICRO-ALU Series
Starting at $7.95