Super Bright LEDs Home
![]() LED Lighting for
Everything
|
Universal
LED Bulb Finder
|
Vehicle
LED Bulb Finder
|
Contact Us
Chat, Email, Support
|
Sign In
|
Cart
Loading Cart Items...
|
|
Navigation
Site Tools
Account
1156 LED Boat and RV Light Bulb w/ Removable Lens - 3 High Power LED - BA15S Retrofit - 240 Lumens





- Not sold in pairs, price per bulb.
Most Popular Accessories
Product Information
- Your vehicle may require an LED compatible Flasher or Load Resistor. LED brake/tail lamps will not flash with most stock flasher units due to their extremely low current draw. Try our Vehicle LED Bulb Finder to find a compatible flasher for your vehicle. Please See More LED Car Bulb Notes
- This bulb is oversize, please see dimensions under Specifications tab.
- For best results the LED color should be the same as the lens color. If bulb is behind a clear lens, use the appropriate color for turn and brake light functions. Please See More LED Car Bulb Notes
- To protect LEDs in marine applications, it is advisable to use a 12 VDC line conditioner to compensate for voltage irregularities common in marine low-voltage systems.
Product Description
LED replacement bulbs can fit numerous boat and RV applications such as navigation lights, cabin lights, ceiling lights, dome lights, tail lights, brake lights, reverse lights, turn signals or side marker lights. This 1156 single-contact bulb has 3 high-power LEDs (1.3-watt) and a 90° viewing angle lens that is removable to create a 130° viewing angle. Produces up to 240 lumens at 9900K. BA15S 15-mm bayonet base for easy plug-and-play installation—just twist to lock in place. The energy-efficient bulb operates within a wide 9-30V DC range and is designed to last 20,000 hours on your motorhome or boat—17 times longer than incandescents. Available in cool white, amber and red. Not sold in pairs. Price per bulb.



RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Turn Lights | Side Marker Lights |
Tail Lights | Reverse Lights |
Brake Lights | LED Map Lights |

9~30 VDC

Environment Friendly, Low Energy Draw

240 Lumens of Cool White Light

Plug-And-Play Replacement Bulb
Specifications Print Specifications
Base Type | 1156 (BA15S) | ||
---|---|---|---|
Beam Angle | 130 degree | ||
CAN Bus[1] | No | ||
Comparable Wattage | 10-15 Watts Incandescent | ||
LED Lifetime | 20000 Hours | ||
LED Quantity | 3 LEDs | ||
Operating Temperature | -30~+85 °C | ||
Polarity Sensitive | Yes | ||
Special Features | Constant-Current Driver, Wide Voltage Range | ||
Standards And Certifications | CE, RoHS Compliant | ||
Storage Temperature | -40~+100 °C | ||
Type | Replacement Bulb | ||
Operating Voltage | 9~30 VDC | ||
Stock Numbers: 1073, 1073LL, 1095, 1141, 1141LL, 1156, 1156A, 1156ALL, 1156LL, 1156NA, 1156ST, 1159, 1195, 12088, 1295, 1295NA, 199, 2396, 3497, 3497LL, 63, 631, 631LL, 7506, 7506L, 7506LL, 7506ST, 7533, 93, 93LL, 97, 97A, 97LL, 97NA | |||
Package Weight: 0.99oz (0.03kg) | |||
Package Dimensions: 2.52" (6cm) x 1.1" (3cm) x 1.1" (3cm) | |||
All specifications are subject to change without notice. 1. CAN Bus LED bulbs are simple plug-and- play LED bulbs which are made specifically for CAN Bus-equipped vehicles. These bulbs work with your vehicle's advanced computer system, so when your vehicle's computer reads them, they respond back correctly. To see if your vehicle operates with a CAN Bus system, simply remove the bulb you're looking to replace, start your vehicle, and if you have a "Bulb Out" message on your dash you have a CAN Bus system. |
Part NO | CCT / Wavelength CCT / Wavelength ![]() | Brightness Brightness For best results, the LED color should be the same as the lens color. If the bulb is behind a clear lens, use the appropriate color for turn and brake light functions. When installed in a housing that has a matching colored lens, red and amber bulbs will appear brighter than white LED bulbs - even though they have lower lumen outputs. As an example: a red lens will filter out all but the red portion of light from a bulb, so if the light being emitted from the bulb is all red, none or very little light will be blocked by the lens. The light from a white LED bulb contains very little light in the red portion of the visible spectrum, so most of the light that contributes to its higher lumen value would be filtered out by a red lens. This makes the white bulb appear dimmer than the red bulb. ![]() | Beam Angle Beam Angle Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread. ![]() | Current Draw @ Operating Voltage Current Draw @ Operating Voltage Current Draw is used to size fuses and wire for a circuit. Current draw is the amount of energy consumed by an LED or LEDs in an electrical circuit at a specific voltage, measured in amps (A) or milliamps (mA). | Price Ea. | Weight | |
---|---|---|---|---|---|---|---|
1156-R3X1W | 617 nm | 90 lm | - | 140 mA | (Discontinued) | - | |
1156-A3X1W | 590 nm | 75 lm | - | 140 mA | (Discontinued) | - | |
1156-W3X1W | 6000 K | 240 lm | - | 170 mA | $14.95 | - |
Lumen meters are a great way to measure white light output but can be deceptive for colored bulb intensity. Lumens measure light wavelengths in all colors of the visible spectrum. Because multiple wavelengths create white light and colored bulbs are a single-wavelength source, colored bulbs will have lower lumen readings. However, they will appear equally as bright as a white bulb. | ![]() |
![]() |
![]() |
---|
Dimensional Drawing
Product Photos






Cool White, Red, Amber







Overall Rating
Total Reviews
Rating Breakdown
Tell Us What You Think
Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.
-
NameDan
-
Technical LevelAverage
-
Part Number1156-A3X1W
-
Reviewed On05/01/15
-
NameLehmanhill
-
Technical LevelAverage
-
Part Number1156-A3X1W
-
Reviewed On08/05/15
Bright and Useful
I ordered this product for daylight running lamps on my motorcycle. The lamp housing is a tight fit with the 1156 bulb, especially for length, so I was originally worried that this wouldn't fit as the photos show the LED to be longer than the 1156.
Upon receiving, I found that it did hit the lens and was considering making an adapter to space the lens further from the housing when I remembered that the LED has a removable lens. When the LED lens is removed, the LED turns out to be almost exactly the length of the original 1156 bulb, so I was able to fit it without modification.
The difference in light between with and without the LED lens is small and the lamp is quite bright, so it is quite useful for my daylight running lamp.
The 3 LEDs make the lamp appear larger and having a nice triangle pattern.
Nice.
-
Nameronald
-
Technical LevelAverage
-
Part Number1156-R3X1W
-
Reviewed On08/02/16
94 Vette back up lamps
I ordered the other cheaper price bulbs and they did not fit in deep enough into the sockets, I contacted Superbrightleds the tech said this should do the job and he was correct. This 1156-W3X1W fit the socket and the light output is super! If you have a 94 Vette you can't go with the cheaper bulbs they will not fit unless you change out sockets.
-
NameDan
-
Technical LevelAverage
-
Part Number1156-W3X1W
-
Reviewed On01/18/16
Not as bright as I thought
I bought these as reverse lights but disapointed that they are not as bright as I thought they'd be. They're just okay. My friend has Cree and would knocked these out the box. Thought I'd give these a shot since I'm a superbrught customer but ...these are a no go for reverse lights in my opinion.
Staff
Response
For a brighter more universal option, look at 1156-CW27
-
NameStephen
-
Technical LevelAverage
-
Part Number1156-W3X1W
-
Reviewed On09/06/16