Super Fast Shipping
- Same-day shipping if order is placed by 2 p.m. Central Time.
- Next-day shipping (excluding weekends) if order is placed after 2 p.m.
- Monday shipping if order is placed on the weekend.
Overnight & 2-Day Shipping/Saturday DeliveryOvernight and 2-day shipping options are only available to destinations within the USA. Shipments are sent via UPS and are delivered in 1 or 2 business days (not weekends).
If you need Saturday delivery, you must request it either in our order form "Comments" box or by calling us at (866) 590-3533. Saturday delivery usually costs about twice as much as normal business day delivery. Quotes are provided upon request.
Car Light Bulbs
LED Strip Lights & LED Bars
LED Home Lighting
LED Landscape Lighting
Off Road LED Light Bars
LED Work Lights
Commercial Truck LED Lights
Emergency Vehicle & Strobe Lights
LED Accent Lighting
Motorcycle LED Lights
LED Boat Lights & RV LED Lights
LED Flashlights & Flashlight Bulbs
LED Grow Lights & Aquarium Lights
Industrial LED Lighting
Hotel & Casino Lighting
WLF series High Power LED Waterproof Light Bar Fixture
- Select options to see various notes.
|50 - 99 pieces||$17.95 to $26.95 each|
|100 - 499 pieces||$15.96 to $23.96 each|
|500 - 999 pieces||$14.96 to $22.46 each|
|1000 + pieces||$13.97 to $20.97 each|
|For discount information or inquiring about larger quantity pricing, click here|
This product has been discontinued.
WLF series waterproof light fixture sealed in an aluminum housing with 3528SMD LEDs. Available in 30.5 cm (12 in) and 60 cm (23.6 in) lengths with 12 inch power wires on both ends. Integrated mounting magnets. 12VDC operation.
Standards and Certifications
Waterproof Light Bar Fixture
High Power LED
- Showcase Lighting
- Cove LED lighting
- Bookshelf LED Lighting
- Cabinet LED Lighting
- Under cabinet lighting
|WLF-x60SMD series Fixtures use 3528SMD LEDs with 120° viewing angle|
|Beam Angle||120 degree|
|Water Resistance||Waterproof IP67|
|LED Lifetime||30000 Hours|
|LED Type||3528 SMD|
|Lumen (Max)||390 Lumen|
|Lumen Per LED||6.5|
|Strip Width||21mm (0.83in.)|
|Suitable for Vehicles||Yes|
|Type||Aluminum Light Bars/Rigid Light Bars|
|Operating Voltage Range||12V DC|
All specifications are subject to change without notice.
|Part NO||Number of LEDs in Unit||Total Length||Emitting Color||CCT / Wavelength |
CCT is used to express the color or shade of white light. The Correlated Color Temperature is the measure of the color appearance of the light emitted from a light source, measured in degrees kelvin (K). The CCT rating is a general 'warmth' or 'coolness' measure of its appearance. Wavelength is used to express a specific color of light other than whites. Wavelength is the portion of the visible spectrum that the human eye can detect, between 380 and 700 nanometers (nm). When trying to match an existing bulb color choose a replacement that most closely matches the CCT or wavelength of the original.
|Intensity Per Foot||Intensity||Radiant Power||Beam Angle |
Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.
|Current Draw @ Operating Voltage |
Current Draw is used to size fuses and wire for a circuit. Current draw is the amount of energy consumed by an LED or LEDs in an electrical circuit at a specific voltage, measured in amps (A) or milliamps (mA).
|Power Consumption||Max Run |
Max Run (or maximum run) is used to recommend the total number of devices that can run in succession without experiencing dimming due to excessive voltage drop in a series circuit (end to end). When Max Run is reached, power wires for additional devices must be 'home run' directly back to the power source, starting a new run.
|WLF-CW30SMD||30||11.8in (0.98ft)||Cool White||5500 K||195 lm/ft||195 lm||-||-||210 mA||2.5 W||20||-||$19.95|
|WLF-WW30SMD||30||11.8in (0.98ft)||Warm White||3200 K||195 lm/ft||195 lm||-||-||205 mA||2.5 W||20||-||$19.95|
|WLF-CW60SMD||60||23.6in (1.97ft)||Cool White||5500 K||57000 mcd/ft||390 lm||-||-||355 mA||4.3 W||10||-||$29.95|
|WLF-WW60SMD||60||23.6in (1.97ft)||Warm White||3200 K||195 lm/ft||390 lm||-||-||350 mA||4.2 W||10||-||$29.95|
I purchased this light to mount inside my tent for camping. It stays mounted to the pole of the folding tent, and the tent stays in my truck 50% of it's life. In the two years I've had it, this light has performed great, no issues at all. I'll also say, it's almost too bright for a tent. It not only lights up the interior of the tent, but also the surrounding area (see attached picture, the tent is mounted on the top of my truck, with the light on inside the tent). -James (customer review)
Use our Calculator
Use our calculator.
Tell Us What You Think
Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.
Tough, and lots of output
I purchased this light to mount inside my tent for camping. It stays mounted to the pole of the folding tent, and the tent stays in my truck 50% of it's life.
In the two years I've had it, this light has performed great, no issues at all. I'll also say, it's almost too bright for a tent. It not only lights up the interior of the tent, but also the surrounding area (see attached picture, the tent is mounted on the top of my truck, with the light on inside the tent).
Great quality, bright and such a small power drain
works great as a hood light, bed light, rear hatch light, boat light... this thing is worth every dang penny.
Great light for many applications
I've purchased a couple dozen of these lights and used them for under kitchen cabinet lights, and also to light the interior of the box truck I use in my business. As under cabinet/counter lights - they are fantastic - the wife loves them! They use 1/3 the power of the old fluorescent fixtures, and the light is more pleasant and even. My neighbor and my daughter went out and bought them as well they were so impressed. In the box of my 14' truck - I used 6 lights. Since 12v power was right there, installation was a snap. The built-in magnetic strip held them in place with no mounting needed. Now the interior of my truck is the envy of fellow operators!
Very bright, excellent color
The warm white is good choice here if you don't want the modern fad of blue lighting. Blue light is harder on the eyes and only gives an illusion of brightness because we grew up with incandescent lights where dim bulbs were more yellow. Anyway, I digress. The light is a good neutral tone instead of warm and is brighter than I expected. I put mine in top of a display case to fill in some shadows and it turned out to be bright enough that I didn't need anything else.
In my third picture you see the wiring coming down. I left that out to show you that this light has leads on each end. I used the lead to power another type of strip light.
I put a cap on my 2006 Ram and while wiring the cap I added two of the light one above each window. I used flexible wire mold and soldered all my connections. I also purchased a WRRS-SP Weatherproof switch and a 12v outlet. I had to use 3M adhesive tape as magnets do not work on fiberglass. I used these lights to get my ice fishing gear out last week and they where perfect. I will be purchasing more of these lights.