store image

HR-ALU LED Strip Channel - Step

Part Number: B1889
Select Length:
6.6ft (2m)
3.3ft (1m)
In Stock
Starting at $14.95 ea.
Volume price as low as $13.45
Orders ship on or before  Monday 09/27/2021
  • Select options to see various notes.


The KLUS HR-ALU series LED aluminum profile housing is durably constructed for use as a floor light, tile light, shower light, or for building facade lighting and garden lighting. This heavy-duty, low-profile LED channel provides a professional mounting solution for flexible, rigid, or linear LED strip lights that measure up to 11 mm wide. The 1m (39-3/8") or 2m (78-3/4") profile housing is constructed of sturdy extruded aluminum that can be surface mounted or flush-mounted. A frosted lens provides smooth lighting with no visible hot spots. It is recommended that this extrusion together with LEDs, cover, and caps should be sealed with neutral silicone sealant (sold separately) to achieve waterproof standards.

4 Years
Super Bright LEDs, Inc. offers a 4-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More


Product Characteristics

The extrusion made from high quality aluminum is designed for flexible or rigid LED strips that are 8-10mm wide. One of the accessories offered for the extrusion is a cover that shades and protects LEDs inside the profile.

The extrusion is designed to be mounted to surfaces, such as ceramic tiles with the use of mounting adhesive. The design and parameters of HR-ALU extrusion and its cover make the fixture durable and sturdy when mounted in the floor, as well as resistant to standard loads, cleaning and general floor maintenance.


Due to its high integrity and compact size, HR-ALU extrusion is ideal for use in bathroom, shower, floor applications or areas exposed to water. The extrusion is as high as the average thickness of the ceramic tile and mounting adhesive, thus it is very often mounted in floors as it integrates with the floor surface. Additionally, it can be used to illuminate exterior architectural elements, such as building facades, terraces, gardens, etc.


Small dimensions, profile can fit slim design and thin furniture pieces, special collar of the profile enables unaesthetic grooves to be covered.

Product Dimensions
B1889 Dimensions
B1889 - Heavy Duty Low Profile Aluminum Profile Housing for LED Strip Lights - KLUS HR-ALU Series
Heavy Duty Low Profile Aluminum Profile Housing for LED Strip Lights - KLUS HR-ALU Series



Overall Rating

Total Reviews


Tell Us What You Think

Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.

Sign In Required to Write a Review
Click here to sign in to your account
Technical Level
Part Number
Reviewed On


The bad thing about this product is there is on way to hold or seal the Frosted Heavy
Duty lens in place, no way to seal the ends.
I wanted to use this product in a damp location.

Helpful? Yes (7) No (0)

Response from Super Bright LEDs:

Thank you for the review. While the B1889-1M is intended for use in interior floor applications I have had customers have success using it in applications like yours. You can use a thin bead of silicone down both sides to seal the lens and hold it in place. Then fill the openings at the ends as well.

Technical Level
Part Number
Reviewed On

Solid channel for modern Installations

These little channels are super sturdy and easy to work with. While there is no hardware connectors to make longer runs, I found some little brackets that drilled and screwing them, can hold them in place, at least for installation. My usage is on a surface deck, 1" thick, so I added a vinyl support plus the height of the channel and is completely flush. For corners, I purchased "L" brackets and screw them into place, works fine and found some flat "L" shape connectors for the LED's itself, ton's of soldering, but is worth it.
Follow Klus' recommendation on neutral, electronic grade silicone, is the only way to protect the corners and drilled angles.

Helpful? Yes (0) No (0)

Send us your Feedback