12 Volt LED Car Bulbs
LED Light Strips & Light Bars
LED Household Lighting
LED Landscape Lighting
Off Road LED Light Bars
LED Truck Lights
LED Work Lights
Emergency Vehicle & Strobe Lights
LED Accent Lighting
Motorcycle LED Lights
Boat, RV, and Other Lighting
LED Flashlights & Flashlight Bulbs
LED Grow Lights & Aquarium Lights
Industrial LED Lighting
Hotel & Casino Lighting
LBM-x3SMD series High Power LED Module String
- Select options to see various notes.
|50 - 99 pieces||$2.65 each|
|100 - 499 pieces||$2.36 each|
|500 - 999 pieces||$2.21 each|
|1000 + pieces||$2.07 each|
|For discount information or inquiring about larger quantity pricing, click here|
This product has been discontinued.
LBM-x3SMD series stainless steel LED module strings. Each module has 3 wide viewing angle 140 degree high power 5050SMD LEDs. Low profile design stainless steel housing with 1 central mounting screw hole and included double sided adhesive foam tape. 3 inch wires between each module. 12VDC operation. Quantity ordered will be wired together on a string with 20 modules maximum per strand. Black stripe wire is negative and non-striped wire is positive.
Standards and Certifications
LED Module String
- Sign Cabinets
- Channel Lights
- Cove LED Lighting
- Edge Lit Signs
- Canopy Illumination
|LBM-x3SMD series Sign Modules use 5050SMD LEDs with 140° viewing angle - SELECT LED COLOR TO MATCH SIGN PLASTIC COLOR|
|Beam Angle||140 degree|
|Water Resistance||Waterproof IP67|
|LED Lifetime||30000 Hours|
|Number of LEDs in Unit||3 LEDs|
|LED Type||5050 SMD|
|LEDs per Segment||3|
|Length (in)||1.3in (0.11ft)|
|Lumen (Max)||40 Lumen|
|Module Length||113.6 mm|
|Price Per Foot||8.85|
|Standards And Certifications||CE/FCC/ISA Approved/ROHS Compliant/UL Recognized|
|Suitable for Vehicles||No|
|UL File Number||UYMR2.E357849|
|Operating Voltage Range||12V DC|
Dimensions: 3.8cm(1.5") x 3.8cm(1.5") x 0.35cm(0.14")
All specifications are subject to change without notice.
|Part NO||Total Length||Strip Width||Emitting Color||CCT / Wavelength |
CCT is used to express the color or shade of white light. The Correlated Color Temperature is the measure of the color appearance of the light emitted from a light source, measured in degrees kelvin (K). The CCT rating is a general 'warmth' or 'coolness' measure of its appearance. Wavelength is used to express a specific color of light other than whites. Wavelength is the portion of the visible spectrum that the human eye can detect, between 380 and 700 nanometers (nm). When trying to match an existing bulb color choose a replacement that most closely matches the CCT or wavelength of the original.
|Intensity Per Foot||Intensity||Radiant Power||Beam Angle |
Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.
|Current Draw per Foot @ 12 Volts DC |
Current Draw Per Foot is used to size power supplies, normally converted to watts per foot. This is equated using total wattage divided by number of linear feet. Current draw per foot is the amount of current consumed by an LED or LEDs in an electrical circuit per linear foot at a specific voltage, measured in milliamps (mA) or watts (W).
|Current Draw @ 12 Volts DC |
Current Draw is used to size fuses and wire for a circuit. Current draw is the amount of energy consumed by an LED or LEDs in an electrical circuit at a specific voltage, measured in amps (A) or milliamps (mA).
|Max Run |
Max Run (or maximum run) is used to recommend the total number of devices that can run in succession without experiencing dimming due to excessive voltage drop in a series circuit (end to end). When Max Run is reached, power wires for additional devices must be 'home run' directly back to the power source, starting a new run.
|LBM-CW3SMD||1.5in (0.12ft)||-||Cool White||5500 K||120 lm/ft||40 lm||-||-||165 mA|
|LBM-NW3SMD||1.5in (0.12ft)||-||Natural White||5000 K||72 lm/ft||24 lm||-||-||180 mA|
|LBM-WW3SMD||1.5in (0.12ft)||-||Warm White||3300 K||120 lm/ft||40 lm||-||-||180 mA|
|LBM-B3SMD||1.5in (0.12ft)||-||Blue||474 nm||9000 mcd/ft||3000 mcd||-||-||180 mA|
|LBM-G3SMD||1.5in (0.12ft)||-||Green||525 nm||21000 mcd/ft||7000 mcd||-||-||180 mA|
|LBM-R3SMD||1.5in (0.12ft)||-||Red||627 nm||10800 mcd/ft||3600 mcd||-||-||255 mA|
|LBM-A3SMD||1.5in (0.12ft)||-||Amber||592 nm||10800 mcd/ft||3600 mcd||-||-||165 mA|
|LBM-UV3SMD||1.5in (0.12ft)||-||UV||395 nm||-||-||90 mW||-||180 mA|
Use our Calculator
Use our calculator.
Use our Calculator
Use our calculator.
Tell Us What You Think
Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.
Excellent product for the price
This LED pad is a great small light unit built for fast simple installation. Excellent to light kitchen cabinets and walkways and even motor vehicle applications. I like these so much I'm purchasing a few more just to play with. FYI I did use these for lighting my countertop. Looking to wire under my '10 Tacoma for vehicle clearance ground lighting.