12 Volt LED Car Bulbs
LED Light Strips & Light Bars
LED Household Lighting
LED Landscape Lighting
Off Road LED Light Bars
LED Truck Lights
LED Work Lights
Emergency Vehicle & Strobe Lights
LED Accent Lighting
Motorcycle LED Lights
Boat, RV, and Other Lighting
LED Flashlights & Flashlight Bulbs
LED Grow Lights & Aquarium Lights
Industrial LED Lighting
Hotel & Casino Lighting
10HP-LED G4 Lamp
- This bulb is oversize, please see dimensions below.
|50 - 99 pieces||$8.95 each|
|100 - 499 pieces||$7.96 each|
|500 - 999 pieces||$7.46 each|
|1000 + pieces||$6.97 each|
|For discount information or inquiring about larger quantity pricing, click here|
Add to Wishlist
Adding product to your Wishlist
There was a problem adding this product to your list. Make sure that you have chosen the necessary options (length, color, etc) and try again
If the problem persists, you can contact us directly
This product has been discontinued.
Disc type G4 base Lamp with 10 high power 5050 SMD LEDs. 12 Volt AC or DC. Produces 111/98 lumen at 7000K/3100K, 120 degree beam angle. 1.25 inch diameter, connection pins exit side of lamp.
Standards and Certifications
- Desk Lamp Replacement Bulbs
- Accent LED Lights
- Display Lighting
- General Lighting
- Replacement Bulbs for Pendant Lights
- 10 x High power 5050 SMD LEDs
- 120 Degree viewing angle
- Produces 111/98 lumen at 7000K/3100K
|Beam Angle||120 degree|
|Comparable Wattage||20~25 Watts|
|LED Lifetime||50000 Hours|
|LED Quantity||10 LEDs|
|LED Type||5050 SMD|
|Lumen (Max)||150 Lumen|
|Operating Temperature||-30~+80 °C|
|Standards And Certifications||CE/FCC/ROHS Compliant|
|Storage Temperature||-40~+90 °C|
|Total Power Consumption||2.5 Watts|
|Operating Voltage Range||12V AC/DC|
Dimensions: 3.782cm(1.49") x 0.798cm(0.31") x 3.015cm(1.19")
All specifications are subject to change without notice.
1. Total product power consumption, measured in watts, including drive circuitry and controllers that make up the entire lamp.
|Part NO||Emitting Color||LED Wattage |
LED manufacturer's wattage rating
|Intensity per LED||Intensity||Beam Angle |
Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.
Royal Blue is binned by radiometric power and peak wavelength rather than photometric lumens and dominate wavelength
|CCT / Wavelength |
CCT is used to express the color or shade of white light. The Correlated Color Temperature is the measure of the color appearance of the light emitted from a light source, measured in degrees kelvin (K). The CCT rating is a general 'warmth' or 'coolness' measure of its appearance. Wavelength is used to express a specific color of light other than whites. Wavelength is the portion of the visible spectrum that the human eye can detect, between 380 and 700 nanometers (nm). When trying to match an existing bulb color choose a replacement that most closely matches the CCT or wavelength of the original.
|Current Draw @ Operating Voltage |
Current Draw is used to size fuses and wire for a circuit. Current draw is the amount of energy consumed by an LED or LEDs in an electrical circuit at a specific voltage, measured in amps (A) or milliamps (mA).
|G4-CWHP10-DAC||Cool White||-||11.1 lm/led||150 lm||-||-||6000 K||205 mA||-||(Discontinued)|
|G4-WWHP10-DAC||Warm White||-||9.8 lm/led||110 lm||-||-||3100 K||195 mA||-||(Discontinued)|
|G4-BHP10-DAC||Blue||-||850 mcd/led||8500 mcd||-||-||470 nm||205 mA||-||(Discontinued)|
|G4-RHP10-DAC||Red||-||1300 mcd/led||13000 mcd||-||-||626 nm||115 mA||-||$9.95|
Dimensions in millimeters (inches)
Use our Calculator
Use our calculator.
Use our Calculator
Use our calculator.
Tell Us What You Think
Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.
Used as replacement bulb for halogen lights of a kitchen extractor hood: after about 1 minute of use, the LED bulbs start flickering.
Thank you for taking the time to send us a review. Customer feedback is very important to us. Sorry that the bulbs didn't work in your application. Some times the LEDs don't draw enough power for the transformer being used and it will cause the flickering. if you are using multiple bulbs on the same circuit usually reinstalling one of the stock bulbs will resolve the issue. In your application this would most likely have been unsightly.