Name: Rigid RGB LED Light Bar with High Power 3-Chip SMD LEDs - Narrow Rigid Light Bar
Brand: Super Bright LEDs
SKU: RLBN-RGB30SMD
Price: 14.99 USD
Availability: InStock
Rating: 5 (2 reviews)

Overview

Rigid linear RGB LED light bars are an extremely versatile solution for a variety of lighting needs, such as cabinet lighting, under-cabinet lighting, cove lighting, task lighting, bookshelf lighting, showcase lighting, cupboard lighting, or other indoor applications where space is limited. This dimmable 1-7/8' light bar uses 5050 SMD RGB LEDs to emit colorful illumination. Use a compatible RGB controller for color selection and color-changing modes. The bar has a separate RGB power input and a common anode female socket. Easily join up to 10 fixtures with compatible interconnect cables (sold separately). Wire must run back to the power source every 10 meters to avoid voltage drop. The non-weatherproof light fixtures have 12 VDC operation and can be cut into 3-LED segments.

Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.

Products that have an International Solid-State Lighting Alliance (ISA) label are approved as quality, energy-efficient LED lights that help to create a sustainable society.

Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Applications

LED Backlights
Accent Lighting
Off Grid Lighting
Coves
Under-Cabinets
Display Cases
Trade Shows

Specifications

Brightness	244 lm/ft (800 lm/m)
Certifications/Compliance	ISA Approved, UL Listed
Color Temperature Correlated Color Temperature is the hue, or tint of white to expect from a light source and is measured in kelvin. Lower numbers give off a warmer white that is closer to candle light, and is good for relaxed and cozy spaces. Higher numbers give off a cooler white light that will appear more blueish. While values to the middle of the spectrum give off a more neutral or natural white light that is similar to daylight. Natural and cool white are considered ideal for task lighting.	RGB
Current Draw Current Draw is used to size fuses and wire for an electrical circuit. Current draw is the amount of energy consumed by an LED or LEDs in an electrical circuit at a specific voltage, measured in amps (A) or milliamps (mA).	0.4A (400mA)
Current Draw per Foot Current Draw Per Foot is used to size power supplies, normally converted to watts per foot. This is equated using total wattage divided by number of linear feet. Current draw per foot is the amount of current consumed by an LED or LEDs in an electrical circuit per linear foot at a specific voltage, measured in milliamps (mA) or watts (W).	247mA
Dimmable	Yes
Environmental Rating Learn more about environmental rating	Non-weatherproof, Suitable for Dry Locations
IP Rating	IP20
LED Beam Angle Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.	180°
LED Type	5050 SMD
LEDs per Segment	3
Length	23in (1.88ft)
Max Run (Class 2) The Max Run of an LED strip is dependent on two things, voltage and density. 24 volt strips in most instances will give you a longer run than a 12 volt strip. However the LED density of the strip will have an effect on the maximum run. If your install needs to extend beyond a strips Max Run additional power feeds can be run back to your power supply.	10
Operating Voltage	12 VDC
Power Consumption	5 Watts
Rated Life (L70)	40000 Hours
Strip Width	8mm (0.31in)
Wattage per Foot	3 Watts

Print Specifications

Accessories & Power Supplies

All Accessories

Controllers

Connectors

Channels

12V Power Supplies

Mounting

Wiring

Accessories Links

Accessory Category

Accessory Type:

$0.85 per Foot

22 Gauge Wire - Four Conductor RGB Power Wire - RGB-4Wire Part Number: RGB-4Wire
In stock

22 Gauge Wire - Four Conductor RGB Power Wire. Use for connecting and lengthening segments of RGB LED Light strips and RGB Controllers. Price per foot.
$0.45 ea.

RLBN RGB Light Bar Power Jumpers Part Number: RLBN-RGB-Px
In stock

RLBN-RGB-Px light bar power jumper. Connects RLBN-RGB30SMD to universal rgb controllers. Available in 15.2cm(6in) or 91.5cm(36in) length.
$0.45 ea.

RLBN-RGB30SMD RGB Light Bar Interconnect Jumpers Part Number: RLBN-RGB-Ix
In stock

RLBN-RGB-Ix light bar interconnect jumper. Connects two RLBN-RGB30SMD strips. Available in 15.2cm(6in) or 91.5cm(36in) length.

$0.35 ea.

3M-FTP Double-Sided Foam Pad - Double-Sided Foam Pad Part Number: 3M-FTP
In stock

High performance 3M Closed-Cell Acrylic Foam Tape Pads - adhesive on both sides for attaching light bars and other LED products to a wide variety of surfaces. Measures 1.25 x 0.625in, 0.088in thick.
$29.99 ea.

3M-FTS Double-Sided Foam Tape Strip - Double-Sided Foam Tape Strip Part Number: 3M 4492
In stock

High performance 3M Double Coated Polyethylene Foam Tape Strips - adhesive on both sides for attaching light bars and other LED products to a wide variety of surfaces. 72 yard reel, which measures 1/4in wide x 216ft long.
$0.25 ea.

Mounting Clip for RLBN Series Narrow Rigid Light Bars - Mounting Clip Part Number: RLBN-MC
In stock

Plastic mounting clip for RLBN series light bars. Mount by adhesive backing or two screw holes spaced 0.65" apart. Measures 1.15" wide x 0.89" long.

$0.29 per Foot

18 Gauge Wire - Two Conductor Power Wire - 18 AWG Power Wire Part Number: WP18-2
In stock

Power Wire for low voltage installations. Parallel bonded two conductor 18 gauge 1x16 stranded wire. Price per foot.
$0.69 per Foot

PVC Jacketed 18 Gauge Wire - Two Conductor Power Wire - Part Number: WP18-2CMR
In stock

UL listed jacketed power wire for low voltage installations. Two conductor 18 gauge stranded wire insulated in PVC jacket. Price per foot.
$0.99 per Foot

Jacketed 18 Gauge Wire - Two Conductor Power Wire - UL Listed - Type CL2 White PVC Jacketed - 18 AWG UL listed Type CL2 Part Number: WP18-CL2
In stock

UL listed type CL2 jacketed power wire for low voltage installations. Ideal for home applications. Two conductor 18 gauge 1x1 solid wire insulated in PVC jacket. Price per foot.

Reviews

100%

5 / 5 stars

2 reviews

Write Your Own Review

Write a Review

You're reviewing: Rigid RGB LED Light Bar with High Power 3-Chip SMD LEDs - Narrow Rigid Light Bar

Select Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Email Address

Summary

Review

Technical Level

Add your photo

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

Review text does not pertain to the product
Abusive and offensive language
Photos are not related to the reviewed product
Any violation of laws and/or copyrighted material
Unrelated hyperlinks/URLs

Rigid RGB LED Light Bar with High Power 3-Chip SMD LEDs - Narrow Rigid Light Bar

Product Photos

Videos