Single Color Mini LED Dimmer with LC2 Connector - Wireless RF Remote - 5 Amps - Mini LED Controller - LC2
Part Number
MCBRF-5ALC2
Customers Also Viewed
Overview
This mini LED dimmer with wireless RF remote is perfect for operating your single-color LED light strips. The LED remote uses brightness +/- controls or 6 button shortcuts to dim light strips from 10%-100% using Pulse Width Modulation (PWM), and it controls your light strip from greater than 50' away in open air. Power-cycle mode retention allows your light strip to return to the mode that was selected before it was powered off. The dimmer has a maximum load capacity of 5 amps and is compatible with LED light strips that operate with in a 5-24V DC range. A male LC2 locking connector easily plugs into the female connector on your light strip. Control an infinite number of receivers with 1 remote, and pair up to 3 remotes with one receiver. Includes remote battery.
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More
Specifications
| Amps | 5 Amps |
|---|---|
| Amps Per Channel | 5 Amps/CH |
| Battery Type | 1 x CR2025 |
| Channels | 1 Channel |
| Control Type | Handheld (RF) Remote |
| Input Connection Type | LC2 |
| Radio Frequency | 433.92 MHz |
| Remote Range | Up to 49.2 ft (15 m) |
| Standards And Certifications | FCC |
| Voltage | 5-24 VDC |
Documents
Accessories & Power Supplies
Accessories Links
Accessory Category-
$29.99 ea.Armacost Lighting Universal Dimmable 12V DC LED Power Supply - 120V AC Input - 20W / 24W / 45W / 60W / 120W Part Number: ARM-12V-DIn stockArmacost Lighting's 12 Volt Universal Dimming LED Power Supply provides steady low voltage power to LED lighting installations. The energy-efficient LED driver is designed using professional, high-performance components that provide stable 0 or 100% dimming free of any “pop-on” or “drop-off”. For the best results use Armacost Lighting LED lights, switches and dimming light controls. Plug-in or hardwire with detachable AC power cord. Suitable for both dry and damp locations. -
$49.99 ea.Armacost Lighting Universal Dimmable 24V DC LED Power Supply - 120V AC Input - 24W / 45W / 60W / 120W Part Number: ARM-24V-DIn stock24 Volt Universal Dimming LED Driver from Armacost Lighting provides steady low voltage power to LED lighting installations. The energy-efficient LED power supply is designed using professional, high-performance components that provide stable 0% to 100% dimming free of any “pop-on” or “drop-off”. For the best results use Armacost Lighting LED lights, switches and dimming light controls. Plug-in or hardwire with detachable AC power cord. Suitable for both dry and damp locations. -
$13.99 ea.Armacost Lighting Standard 12V DC LED Power Supply - 120V AC Input - 12W / 24W / 36W / 60W Part Number: ARM-12V-SIn stockArmacost Lighting’s 12 Volt Standard LED Power Supply delivers energy-efficient, low voltage power to any LED lighting installation. The constant voltage LED driver is designed using high-performance, professional grade electronics that provide stable low voltage power output. No minimum load required. Plug-in or hardwire with detachable AC power cord. Not compatible with 120V AC dimmers. For best results use Armacost Lighting LED products -
$19.99 ea.Armacost Lighting Standard 24V DC LED Power Supply - 120V AC Input - 24W / 36W Part Number: ARM-24V-SIn stock24 Volt Standard LED Power Supplies from Armacost Lighting deliver energy-efficient, low voltage power to any LED lighting installation. The constant voltage LED driver is designed using high-performance, professional grade electronics that provide stable power output. No minimum load required. Plug-in or hardwire with detachable AC power cord. Not compatible with 120V AC dimmers. For best results use Armacost Lighting LED products. -
$23.99 ea.Mean Well LED Switching Power Supply - LRS / SE Series - 100-1000W - Enclosed - 12V DC Part Number: SE-x-12In stockThe Mean Well LED switching power supply is a safe and economical choice for powering your LED lighting. It has integrated short circuit, overload, overvoltage, and over-temperature protection. Additionally, it can withstand a 300VAC surge input for 5 seconds and has a built-in cooling fan. A universal AC input range of 100-240VAC and multiple wattage options make it a versatile and easy-to-use option for powering LED lighting systems.
-
$0.35 ea.3M-FTP Double-Sided Foam Pad - Double-Sided Foam Pad Part Number: 3M-FTPIn stockHigh performance 3M Closed-Cell Acrylic Foam Tape Pads - adhesive on both sides for attaching light bars and other LED products to a wide variety of surfaces. Measures 1.25 x 0.625in, 0.088in thick. -
$19.99 ea.DiodeDrive® Desktop AC Power Adapter - 24 VDC Switching Power Supply - 60W-120W Part Number: CPS-24V-x0WIn stockCPS series Power Adaptor from DiodeDrive provides power for 24 VDC systems, with either 60 or 120-watts. The reliable Class II device has a fully enclosed plastic case and protection against short circuit and overload. 2-pin 120 VAC input. 5.5-mm barrel connector for easy powering. -
$0.29 per Foot18 Gauge Wire - Two Conductor Power Wire - 18 AWG Power Wire Part Number: WP18-2In stockPower Wire for low voltage installations. Parallel bonded two conductor 18 gauge 1x16 stranded wire. Price per foot. -
$21.99 ea.LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 12V Part Number: CVPS-xWP-12VIn stockThis LED switching power supply has been designed for constant voltage operation. Reliable and widely applicable, it powers LED technology without energy waste or risk of circuit overload. Fully enclosed in a waterproof case.
-
$0.09 ea.22-16 AWG Grey 3M Twist-On Wire Connector Part Number: WN-2216In stockUse these 3M 22-16 AWG grey wire connector for closed-end connections and secure splices. The UL-Listed twist-on wire connectors tighten with out ratcheting and feature a deep skirt to prevent bare wire from being exposed. -
$19.99 ea.DiodeDrive® Desktop AC Power Adapter - 12 VDC Switching Power Supply - 60W-120W Part Number: CPS-12V-x0WIn stockCPS series Power Adaptor from DiodeDrive provides power for 12 VDC systems, in either 60 or 120-watts. The reliable Class II device has a fully enclosed plastic case and protection against short circuit and overload. 2-pin 120 VAC input. 5.5-mm barrel connector for easy powering. -
$7.99 ea.DiodeDrive® Wall-Mounted AC Adapter - 24 VDC Power Supply - 12W / 18W / 24W / 36W / 48W Part Number: CPS-24V-xWIn stockPower Adaptor from DiodeDrive provides power for 24 VDC systems. The Class II device has an enclosed plastic case and protection against electoral shock. 2-prong 120 VAC input. 5.5-mm barrel connector. -
View all
All Accessories47 additional compatible accessories
-
$49.99 ea.Armacost Lighting Universal Dimmable 24V DC LED Power Supply - 120V AC Input - 24W / 45W / 60W / 120W Part Number: ARM-24V-DIn stock24 Volt Universal Dimming LED Driver from Armacost Lighting provides steady low voltage power to LED lighting installations. The energy-efficient LED power supply is designed using professional, high-performance components that provide stable 0% to 100% dimming free of any “pop-on” or “drop-off”. For the best results use Armacost Lighting LED lights, switches and dimming light controls. Plug-in or hardwire with detachable AC power cord. Suitable for both dry and damp locations. -
$19.99 ea.Armacost Lighting Standard 24V DC LED Power Supply - 120V AC Input - 24W / 36W Part Number: ARM-24V-SIn stock24 Volt Standard LED Power Supplies from Armacost Lighting deliver energy-efficient, low voltage power to any LED lighting installation. The constant voltage LED driver is designed using high-performance, professional grade electronics that provide stable power output. No minimum load required. Plug-in or hardwire with detachable AC power cord. Not compatible with 120V AC dimmers. For best results use Armacost Lighting LED products. -
$19.99 ea.DiodeDrive® Desktop AC Power Adapter - 24 VDC Switching Power Supply - 60W-120W Part Number: CPS-24V-x0WIn stockCPS series Power Adaptor from DiodeDrive provides power for 24 VDC systems, with either 60 or 120-watts. The reliable Class II device has a fully enclosed plastic case and protection against short circuit and overload. 2-pin 120 VAC input. 5.5-mm barrel connector for easy powering. -
$7.99 ea.DiodeDrive® Wall-Mounted AC Adapter - 24 VDC Power Supply - 12W / 18W / 24W / 36W / 48W Part Number: CPS-24V-xWIn stockPower Adaptor from DiodeDrive provides power for 24 VDC systems. The Class II device has an enclosed plastic case and protection against electoral shock. 2-prong 120 VAC input. 5.5-mm barrel connector. -
$21.99 ea.Mean Well LED Switching Power Supply - SE Series 450-1000W Enclosed Power Supply - 24V DC Part Number: SE-x-24In stockThe Mean Well LED switching power supply is a safe and economical choice for powering your LED lighting. It has integrated short circuit, overload, overvoltage, and over-temperature protection. Additionally, it can withstand a 300VAC surge input for 5 seconds and has a built-in cooling fan. A universal AC input range of 100-240VAC and multiple wattage options make it a versatile and easy-to-use option for powering LED lighting systems.
-
$21.99 ea.Mean Well LED Switching Power Supply - LRS Series 100-350W Enclosed Power Supply - 24V DC Part Number: LRS-x-24In stockThe Mean Well LED switching power supply is a safe and economical choice for powering your LED lighting. It has integrated short circuit, overload, overvoltage, and over-temperature protection. The 100W and 200W cool by air convection, and the 350W has a built-in cooling fan. A universal AC input range of 100-240VAC and multiple wattage options make it a versatile and easy-to-use option for powering LED lighting systems.
-
$114.99 ea.Magnitude Dimmable LED Power Supply - 60-200W - 24V DC Part Number: MxL24DC-ARIn stockMagnitude Dimmable LED Power Supplies are designed with magnetic transformer cores. The 24V driver has a metal Nerma 3R enclosure and can be used outdoors and indoors. It is equipped with auto-reset breakers— one on the input and one on the output, which protect both the load and driver. Includes 2 knock-outs to enable easy installation that complies with electrical code requirements. Efficiency of 85% and above allows the driver to operate at low temperatures. Compatible with TRIAC dimmers. Class 2 rated (96W versions only). -
$21.99 ea.LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 24V Part Number: CVPS-xWP-24VIn stockThis LED switching power supply has been designed for constant voltage operation. Reliable and widely applicable, it powers LED technology without energy waste or risk of circuit overload. Fully enclosed in a waterproof case.
-
$12.99 ea.Mean Well LED Switching Power Supply - LPV Series 20-100W Single Output LED Power Supply - 24V DC Part Number: LPV-x-24In stockThe DC LPV Series 20-100W Mean Well LED Switching Power Supply is a reliable and economical 24V DC single-output power supply suitable for LED lighting and LED moving sign applications with short circuit, overload, and over-voltage protection. -
$46.99 ea.LED Switching Power Supply - DiodeDrive® Series - 60W-150W Enclosed Power Supply - 24V Part Number: CVPS-xWM-24VIn stockDiodeDrive Class 2 switching power supply is designed for constant voltage operation. Fully enclosed in a waterproof case, the durable device will withstand moisture and dust for a long lifespan. Reliable and widely applicable, use it to power LED lights inside or outside without energy waste or risk of circuit overload.
-
$33.99 ea.LED Switching Power Supply - DiodeDrive® Series - 60W-240W Enclosed Power Supply - 24V Part Number: CVPS-xWH-24VIn stockDiodeDrive Class 2 switching power supply is fully enclosed with a heavy duty case to withstand water and debris for a long lifespan. Guaranteed with a 7 year warranty, the reliable device is designed for constant voltage operation. Widely applicable, use it to power LED lights inside or outside without energy waste or risk of circuit overload.
-
$38.99 ea.Mean Well LED Switching Power Supply - PWM Series 40-120W LED Power Supply - 24V Dimmable Part Number: PWM-x-24In stockThe Mean Well LED switching power supply is a reliable and economical choice for powering your LED lighting. It has integrated short circuit, overload, overvoltage, and over-temperature protection. Additionally, it can withstand a 300VAC surge input for 5 seconds and has a built-in cooling fan. A universal AC input range of 100-240VAC and multiple wattage options make it a versatile and easy-to-use option for powering LED lighting systems.
-
View all
24V Power Supplies17 additional compatible accessories
-
$29.99 ea.Armacost Lighting Universal Dimmable 12V DC LED Power Supply - 120V AC Input - 20W / 24W / 45W / 60W / 120W Part Number: ARM-12V-DIn stockArmacost Lighting's 12 Volt Universal Dimming LED Power Supply provides steady low voltage power to LED lighting installations. The energy-efficient LED driver is designed using professional, high-performance components that provide stable 0 or 100% dimming free of any “pop-on” or “drop-off”. For the best results use Armacost Lighting LED lights, switches and dimming light controls. Plug-in or hardwire with detachable AC power cord. Suitable for both dry and damp locations. -
$13.99 ea.Armacost Lighting Standard 12V DC LED Power Supply - 120V AC Input - 12W / 24W / 36W / 60W Part Number: ARM-12V-SIn stockArmacost Lighting’s 12 Volt Standard LED Power Supply delivers energy-efficient, low voltage power to any LED lighting installation. The constant voltage LED driver is designed using high-performance, professional grade electronics that provide stable low voltage power output. No minimum load required. Plug-in or hardwire with detachable AC power cord. Not compatible with 120V AC dimmers. For best results use Armacost Lighting LED products -
$23.99 ea.Mean Well LED Switching Power Supply - LRS / SE Series - 100-1000W - Enclosed - 12V DC Part Number: SE-x-12In stockThe Mean Well LED switching power supply is a safe and economical choice for powering your LED lighting. It has integrated short circuit, overload, overvoltage, and over-temperature protection. Additionally, it can withstand a 300VAC surge input for 5 seconds and has a built-in cooling fan. A universal AC input range of 100-240VAC and multiple wattage options make it a versatile and easy-to-use option for powering LED lighting systems.
-
$21.99 ea.LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 12V Part Number: CVPS-xWP-12VIn stockThis LED switching power supply has been designed for constant voltage operation. Reliable and widely applicable, it powers LED technology without energy waste or risk of circuit overload. Fully enclosed in a waterproof case.
-
$19.99 ea.DiodeDrive® Desktop AC Power Adapter - 12 VDC Switching Power Supply - 60W-120W Part Number: CPS-12V-x0WIn stockCPS series Power Adaptor from DiodeDrive provides power for 12 VDC systems, in either 60 or 120-watts. The reliable Class II device has a fully enclosed plastic case and protection against short circuit and overload. 2-pin 120 VAC input. 5.5-mm barrel connector for easy powering. -
$7.99 ea.DiodeDrive® Wall-Mounted AC Adapter - 12 VDC Power Supply - Black / White - 12W / 18W / 24W / 36W / 48W Part Number: CPS-12V-xWIn stockPower Adaptor from DiodeDrive provides power for 12 VDC systems. The Class II device has an enclosed plastic case and protection against electoral shock. 2-Prong 120 VAC input. 5.5-mm barrel connector. -
$12.99 ea.Mean Well LED Switching Power Supply - LPV Series 20-100W Single Output LED Power Supply - 12V DC Part Number: LPV-x-12In stockThe DC LPV Series 20-100W Mean Well LED Switching Power Supply is a reliable and economical 12V DC single-output power supply suitable for LED lighting and LED moving sign applications with short circuit, overload, and over-voltage protection. -
$114.99 ea.Magnitude Dimmable LED Power Supply - 60-200W - 12V DC Part Number: MxL12DC-ARIn stockMagnitude Dimmable LED Power Supplies are designed with magnetic transformer cores. The 12V driver has a metal NEMA 3R enclosure and can be used outdoors and indoors. It is equipped with auto-reset breakers— one on the input and one on the output, which protect both the load and driver. Includes 2 knock-outs to enable easy installation that complies with electrical code requirements. Efficiency of 80% and above allows the driver to operate at low temperatures. Compatible with TRIAC dimmers.
-
$8.99 ea.Mean Well LED Switching Power Supply - AP Series 12-35W Single Output LED Power Supply - 12V DC Part Number: APV-x-12In stockThe Mean Well LED switching power supply is a safe and economical choice for powering your LED lighting. It has integrated short circuit, overload, overvoltage, and over-temperature protection. Additionally, it has a constant current limiting circuit, full load burn-in, and fixed switching frequency. It can withstand a universal AC input range of 100-240VAC, and multiple wattage options make it a versatile and easy-to-use option for powering LED lighting systems.
-
$39.99 ea.Dimmable LED Driver - Enclosed Power Supply - 25-60W - 12 Volt DC Part Number: CVPSD-xWP-12V-JBIn stockThis enclosed dimmable LED driver/power supply is class-2 rated and has a maximum load of 25 or 60 watts. The 12-volt constant voltage driver has 2 entry points to screw terminals for easy wire access and is encased in a durable, vented aluminum enclosure. The enclosure is equipped with wiring knockouts on both ends. Compatible with TRIAC dimmers. -
$1.99 ea.12 VDC Battery Power Supply - 8-Cell AA Battery Holder Part Number: BPS-12VDCIn stockUse these portable battery power supplies for 12V LED strip lights or other 12 VDC products. The AA battery holders use eight cells and are available in a mountable slim inline profile, double-sided compact, double-sided wide, or with a cover and on/off switch. Each battery holder has a 5.5mm barrel connector. -
$46.99 ea.LED Switching Power Supply - DiodeDrive® Series - 60W-150W Enclosed Power Supply - 12V Part Number: CVPS-xWM-12VIn stockDiodeDrive Class 2 switching power supply is designed for constant voltage operation. Fully enclosed in a waterproof case, the durable device will withstand moisture and dust for a long lifespan. Reliable and widely applicable, use it to power LED lights inside or outside without energy waste or risk of circuit overload.
-
View all
12V Power Supplies22 additional compatible accessories
-
$0.35 ea.3M-FTP Double-Sided Foam Pad - Double-Sided Foam Pad Part Number: 3M-FTPIn stockHigh performance 3M Closed-Cell Acrylic Foam Tape Pads - adhesive on both sides for attaching light bars and other LED products to a wide variety of surfaces. Measures 1.25 x 0.625in, 0.088in thick.
-
$0.09 ea.22-16 AWG Grey 3M Twist-On Wire Connector Part Number: WN-2216In stockUse these 3M 22-16 AWG grey wire connector for closed-end connections and secure splices. The UL-Listed twist-on wire connectors tighten with out ratcheting and feature a deep skirt to prevent bare wire from being exposed.
-
$0.29 ea.28-12 GA Lever-Lock Quick Connect Terminal Blocks Part Number: LQC-xIn stockLever-Lock Quick Connect Terminal Block for 28 to 12 Gauge wire. Alternative solution for traditional wire nuts to create quicker and more secure wire connections. Insert stripped wires and close the lever to secure wire and create a common connection between the other terminals, no tools required. Available with 2, 3 or 5 conductor terminals.
-
$0.21 ea.22-18 AWG Butt Connectors - Perma-seal Butt Connectors Part Number: PSC-2218In stockUse this butt connector to connect and seal 22-18 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun. -
$9.95 ea.Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces Part Number: DC-x-SIn stockDolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in a 100 Pack.
-
$0.75 ea.Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel Part Number: STxC-2418In stockEasily splice wires with out stripping insulation with single-channel or dual-channel "T" tap connectors. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. The clear design allows you to ensure that wires are connected. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.
-
$0.39 ea.Black Cable Ties - 10 Pack Part Number: CT-B-10In stock4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia.
-
$0.29 per Foot18 Gauge Wire - Two Conductor Power Wire - 18 AWG Power Wire Part Number: WP18-2In stockPower Wire for low voltage installations. Parallel bonded two conductor 18 gauge 1x16 stranded wire. Price per foot.
Reviews
4.5 / 5 stars
16 reviews
4.5 / 5 stars
16 reviews
Write Your Own Review
Review Guidelines
superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Abusive and offensive language
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
Stay in touch & Save 10% on your next order!*