Name: SLESA-U10 Wi-Fi Standalone DMX RDM Controller - 512 Channels - Software and 5VDC USB Power Supply Included
Brand: Super Bright LEDs
SKU: SLESA-U10
Price: 574.99 USD
Availability: InStock

Overview

Easily program the standalone DMX controller using a Windows PC or MAC computer. The controller is equipped with two modes of operation: standalone mode and live mode (when controlled via computer). The DMX controller holds 512 channels and can be expanded up to 1,024 channels after a manufacture upgrade. Set up 99 scenes and 1 zone using the ESA2 or ESA2 PRO software on a computer. It is USB power-based with 8 dry contact HE10 ports and two XLR3 output ports. Standalone function has 100 kb of memory. For operation via smartphone or tablet, use in standalone mode and connect the controller to Wi-Fi. A USB power cable, USB power adapter, and programming software are included.

Product Details:

512 DMX512 channels when using both modes
Expandable to 1,024 DMX512 channels
99 scenes and 1 control zone
Program using ESA2/ESA2 PRO software (Windows or MAC)
Compatible with Arcolis App for smartphone or tablet control
Sequence step capacity: 3,935 steps (20 channels), 1,550 steps (60 channels), and 190 steps (512 channels)
100 kb standalone memory
Two DMX XLR3 outputs

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Specifications

Control Type	DMX512
Input Connection Type	HE10, USB-C
IP Rating	IP20
Operating Temperature	0~+50 °C (32~+122 °F)
Standards And Certifications Standards and certifications comprise a vast number of companies and compliances that serve specific purposes—primarily addressing safety, environmental impact and energy efficiency, and sanitation. They are divided into categories for each product type and certification type to allow for very specific qualifications related to each product. When this system is being used as intended, it gives consumers, installers, suppliers, and anyone else that may be involved confidence that the product is safe and will work well in their application. The most common UL and ETL certifications relate to safety and installation, although they do also provide some sanitation-related certifications (using NSF standards). Another common certification body is the DLC, which specializes in certifying the performance of a light—mainly related to environmental impact and electrical efficiency. Learn more about different certification types here.	CE
Voltage	5 VDC

Print Specifications

Accessories & Power Supplies

All Accessories

DMX Decoders

DMX Adapters

DMX Cables

DMX Connectors

DMX Controllers

DMX Terminators

Accessories Links

Accessory Category

Accessory Type:

$5.99 ea.

DMX 5-Pin Male XLR5 Cable Connector Part Number: DMX5M
In stock

Use the DMX cable connector to create custom DMX cables. The black 5-pin male XLR5 cable connector is constructed of a zinc XLR shell, a plastic cap, and a rubber strain relief boot. For installation, connect pigtail wires (sold separately) to the end of the connector and run them through the wire strain relief, carefully solder the cables together and reassemble the connector.
$2.99 ea.

DMX 3-Pin Female XLR3 Cable Connector Part Number: DMX3F
In stock

Use the DMX cable connector to create custom DMX cables. The black 3-pin female XLR3 cable connector is constructed of a zinc XLR shell, a plastic cap, and a rubber strain relief boot. For installation, connect pigtail wires (sold separately) to the end of the connector and run them through the wire strain relief, carefully solder the cables together and reassemble the connector.
$5.99 ea.

DMX 5-Pin Female XLR5 Cable Connector Part Number: DMX5F
In stock

Use the DMX cable connector to create custom DMX cables. The black 5-pin female XLR5 cable connector is constructed of a zinc XLR shell, a plastic cap, and a rubber strain relief boot. For installation, connect pigtail wires (sold separately) to the end of the connector and run them through the wire strain relief, carefully solder the cables together and reassemble the connector.
$2.99 ea.

DMX 3-Pin Male XLR3 Cable Connector Part Number: DMX3M
In stock

Use the DMX cable connector to create custom DMX cables. The black 3-pin male XLR3 cable connector is constructed of a zinc XLR shell, a plastic cap, and a rubber strain relief boot. For installation, connect pigtail wires (sold separately) to the end of the connector and run them through the wire strain relief, carefully solder the cables together and reassemble the connector.

$299.99 ea.

SLESA-U9 Standalone DMX RDM Controller - 256 Channels - Software and USB Power Cord Included Part Number: SLESA-U9
In stock

Easily program the standalone DMX controller using a Windows PC or MAC computer. The controller is equipped with two modes of operation: standalone mode and live mode (when controlled via computer). The standalone mode controls up to 256 DMX channels and live mode controls up to 512 channels. Set up 20 scenes and 1 zone using the ESA2 software on a computer. It is USB power-based with 8 dry contact HE10 ports and an XLR3 output port. Standalone function has 20 kb of memory. A USB power cable and programming software are included.

$3.99 ea.

DMX Terminator for XLR3 - Single Part Number: DMX3T
In stock

The DMX terminator plugs into any XLR 3-pin data port at the end of a daisy chain. Use a terminator to prevent signal reflection.
$6.99 ea.

DMX Terminator for XLR5 - Single Part Number: DMX5T
In stock

The DMX terminator plugs into any XLR 5-pin data port at the end of a daisy chain. Use a terminator to prevent signal reflection.

Reviews

0%

0 / 5 stars

0 reviews

Write Your Own Review

Write a Review

You're reviewing: SLESA-U10 Wi-Fi Standalone DMX RDM Controller - 512 Channels - Software and 5VDC USB Power Supply Included

Select Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Email Address

Summary

Review

Technical Level

Add your photo

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

Review text does not pertain to the product
Abusive and offensive language
Photos are not related to the reviewed product
Any violation of laws and/or copyrighted material
Unrelated hyperlinks/URLs

SLESA-U10 Wi-Fi Standalone DMX RDM Controller - 512 Channels - Software and 5VDC USB Power Supply Included

Features

Product Photos

Overview

Specifications