Name: Mean Well LED Switching Power Supply - PCD Series 20-25W AC Dimmable LED Constant Current Driver - A-Type - 1050mA - 16-24 VDC
Brand: Super Bright LEDs
SKU: PCD-25-1050A
Price: 24.99 USD
Availability: OutOfStock

Overview

Work with leading edge and trailing edge dimmers
100-120V AC Input Range
Fully isolated plastic case
Built-in constant current limiting circuit
Protections: Short circuit / Overload / Over temperature
Class 2 power supply
Class II power supply - no FG
Built-in active PFC function
Cooling by free air convection
100% full load burn-in test
High reliability
3 year warranty

Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Recognized label ensures that a product component, such as a power supply or LED light strip, has been tested and verified as safe to use in a UL-Listed product. UL-Listed product samples are tested by UL and meet their Standards for Safety requirements.

Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.

Super Bright LEDs, Inc. offers a 3-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Specifications

Brand	Mean Well
Built-in PFC Function	Yes
Certifications/Compliance	Class 2, Class II, FCC, UL Recognized
Dimmable	Yes
Dimming Control TRIAC Dimming: Triode for alternating current (TRIAC) dimming is used to control high-voltage dimmable power supplies such as Magnitude Dimmable Power Supplies. These dimmable power supplies work by varying the power on the AC input side of the power supply by means of a TRIAC dimmer. This change in power on the AC input side will vary the voltage on the DC output side and control the intensity of the LEDs. TRIAC dimmers are common hardware store and household dimmers, which include brand names such as Lutron and Leviton. Pulse-Width Modulation Dimming: Pulse-width modulation (PWM) dimming can be used to control dimmable power supplies such as Mean Well HLG Series and Mean Well LPF Series. This type of dimming control adjusts the output current based on the duty cycle. As the duty cycle increases, current will increase and the LEDs will be brighter. Conversely, if the duty cycle decreases, the current will decrease and the LEDs will be dimmer. Pulse-width modulation for these drivers is based on a 10V signal level with a frequency between 100Hz~3KHz. The MCBRF-4A or MLD-5A are compatible for this application. Resistive Dimming: Resistive dimming can be used to control dimmable power supplies such as Mean Well HLG Series. The resistance can be fixed or variable. If a fixed level of dimming is required, a simple resistor is all that is needed to dim the LEDs to a particular level. If a varying dimmable level is desired, a potentiometer can serve this purpose. By changing the resistance value of the potentiometer, the output current of the power supply changes, and the LED intensity changes. Controlling a single power supply will require a 100K ohm potentiometer for 100% intensity (100K ohm) to approximately 10% intensity (10K ohm) based on where the wiper is positioned. 1-10V Dimming: 1-10V dimming can be used to control dimmable power supplies such as 12V Mean Well HLG-40~240 Series or 24V Mean Well HLG-40~240 Series. This type of dimming control is an older style for compatible dimmable power supplies and is being replaced with 0-10V dimmer control. 1-10V dimming control works by varying the voltage from 1-10 VDC. A 10-volt signal on the dimming wire will allow for maximum current to flow to the LEDs for maximum intensity. A 1-volt signal on the dimming wire allows 10% of the current to flow from the power supply, which generates approximately 10% of the maximum intensity for the LEDs. 0-10V Dimming: 0-10V dimming can be used to control dimmable power supplies such as 12V Mean Well HLG-600 Series or 24V Mean Well HLG-600 Series. This type of dimming control is the most popular and newest style for compatible dimmable power supplies. 0-10V dimming control works by varying the voltage from 0-10 VDC. A 10-volt signal on the dimming wire will allow for maximum current to flow to the LEDs for maximum intensity. A 0.6-volt signal on the dimming wires allows 6% of the current to flow from the power supplyâ€”dimming the LEDs to approximately 6% of full intensity. 0-10V dimmers can be found here.	TRIAC
Environmental Rating	Non-weatherproof, Suitable for Damp Locations
Input Connection Type	Pigtail
Input Frequency Range	47 ~ 63 Hz
Input Voltage	100-120 VAC
IP Rating .	IP30
Multi-Tap	No
Number of Outputs	1
Output Current	1.05 A
Output Voltage	16-24 VDC
Warranty	3 Year

Print Specifications

Accessories & Power Supplies

All Accessories

Installation Supplies

Dimmers

Accessories Links

Accessory Category

Accessory Type:

$0.35 ea.

3M-FTP Double-Sided Foam Pad - Double-Sided Foam Pad Part Number: 3M-FTP
In stock

High performance 3M Closed-Cell Acrylic Foam Tape Pads - adhesive on both sides for attaching light bars and other LED products to a wide variety of surfaces. Measures 1.25 x 0.625in, 0.088in thick.
$21.99 ea.

Single-Pole Switch and Slide LED Dimmer - 120V - White Part Number: DND-LED1-1-x
In stock

Use this white 120V TRIAC dimmer for dimmable LED bulbs and fixtures. It has a paddle switch for on/off functionality and a small slider for dimming. The single-pole dimmer can be used to control lights from one location. Use the integrated low-end trim adjustment dial to achieve your fixture or bulb's lowest light level without flickering. This 120V 60Hz LED dimmer has a 150-watt max for LEDs (150-watt max for CFL bulbs and 600-watt max for incandescent bulbs).
$4.99 ea.

3M Adhesion Promoter - Single Pack Part Number: 06396
In stock

3M Adhesion Promoter 06396 is a liquid primer specifically formulated for automotive applications that enhances adhesion of 3M Acrylic Foam Tapes for interior and exterior trim applications. The sponge applicator packet is easy to use and makes an ideal choice for LED strip light and aluminum extrusion installations.
$22.99 ea.

3-Way Switch and Slide LED Dimmer - 120V Part Number: DND-LED3-1-x
In stock

Use this 120V TRIAC dimmer for dimmable LED bulbs and fixtures. It has a paddle switch for on/off functionality and a small slider for dimming. The 3-way dimmer can be used to control lights from 2 locations or can be used for single-pole installation. Use the integrated low-end trim adjustment dial to achieve your fixture or bulb's lowest light level with out flickering. This 120V 60Hz LED dimmer has a 150-watt max for LEDs (150-watt max for CFL bulbs and 600-watt max for incandescent bulbs).

$0.35 ea.

3M-FTP Double-Sided Foam Pad - Double-Sided Foam Pad Part Number: 3M-FTP
In stock

High performance 3M Closed-Cell Acrylic Foam Tape Pads - adhesive on both sides for attaching light bars and other LED products to a wide variety of surfaces. Measures 1.25 x 0.625in, 0.088in thick.
$4.99 ea.

3M Adhesion Promoter - Single Pack Part Number: 06396
In stock

3M Adhesion Promoter 06396 is a liquid primer specifically formulated for automotive applications that enhances adhesion of 3M Acrylic Foam Tapes for interior and exterior trim applications. The sponge applicator packet is easy to use and makes an ideal choice for LED strip light and aluminum extrusion installations.

$21.99 ea.

Single-Pole Switch and Slide LED Dimmer - 120V - White Part Number: DND-LED1-1-x
In stock

Use this white 120V TRIAC dimmer for dimmable LED bulbs and fixtures. It has a paddle switch for on/off functionality and a small slider for dimming. The single-pole dimmer can be used to control lights from one location. Use the integrated low-end trim adjustment dial to achieve your fixture or bulb's lowest light level without flickering. This 120V 60Hz LED dimmer has a 150-watt max for LEDs (150-watt max for CFL bulbs and 600-watt max for incandescent bulbs).
$22.99 ea.

3-Way Switch and Slide LED Dimmer - 120V Part Number: DND-LED3-1-x
In stock

Use this 120V TRIAC dimmer for dimmable LED bulbs and fixtures. It has a paddle switch for on/off functionality and a small slider for dimming. The 3-way dimmer can be used to control lights from 2 locations or can be used for single-pole installation. Use the integrated low-end trim adjustment dial to achieve your fixture or bulb's lowest light level with out flickering. This 120V 60Hz LED dimmer has a 150-watt max for LEDs (150-watt max for CFL bulbs and 600-watt max for incandescent bulbs).

Reviews

%

0 / 5 stars

0 reviews

Write Your Own Review

Write a Review

You're reviewing: Mean Well LED Switching Power Supply - PCD Series 20-25W AC Dimmable LED Constant Current Driver - A-Type - 1050mA - 16-24 VDC

Select Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Email Address

Summary

Review

Technical Level

Add your photo

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

Review text does not pertain to the product
Abusive and offensive language
Photos are not related to the reviewed product
Any violation of laws and/or copyrighted material
Unrelated hyperlinks/URLs

Mean Well LED Switching Power Supply - PCD Series 20-25W AC Dimmable LED Constant Current Driver - A-Type - 1050mA - 16-24 VDC