MiBoxer WiFi Smart Multi Zone RGBW Controller - 6 Amps/Channel

MiBoxer WiFi Smart Multi Zone RGBW Controller - 6 Amps/Channel - RGBW Controller (Receiver)

Part Number
RGBW6-MZ
In Stock
$17.95 ea.
Volume price as low as $16.16 ea. See All Discount Pricing
50 pieces $17.05 ea.
100 pieces $16.69 ea.
200 pieces $16.16 ea.
Inquire about pricing

Overview

Universal Red/Green/Blue/White (RGBW) LED WiFi Compatible Controller & Dimmer without remote. Use to control up to four separate "zones" of RGBW LED strips that will be linked and controlled by one or several wireless remotes or smartphones with the Wi-Fi LED Controller Gateway (White and RGB channels cannot be used simultaneously). Synchronization function allows a single remote to operate one or multiple controllers (User configurable). Maximum load is 6 amps per channel, 24 amps total. Must be paired with Wi-Fi LED Controller Gateway (WIFI-CON -- Sold separately) for adjusting all controller functions using a Smartphone or tablet running Android or iOS using the free MiBoxer app.

Please note: MiLight and MiBoxer are compatible smart technology brands. Products under these names are able to work interchangeably with each other.
FCC
FCC
2 Years
2 Years
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a product of equal value may be substituted or a gift card for the value of the product. Read More

Applications

  • Home Lighting
  • Home Accent Lighting
  • Remote Controlled Light

Specifications

Amps 24A
Amps Per Channel 6 Amps/CH
Channels 4 Channels
Control Type Handheld (RF) Remote
Input Connection Type Screw Terminals
Radio Frequency 2.4 GHz
Standards And Certifications FCC, RoHS Compliant
Supported Smart Phone Apps MiBoxer
Volts 12~24 VDC
Print Specifications

 Installation & Features  

Wireless Remote
1. Master On(-)/Off(O)
A master On(-)/Off(O) control for all zone-linked RGB(W) light strips. Also activates the “Master” function, which allows the remote to control the RGB(W) light strips of all zones. If a zone is currently active, pressing the master On(-) button restores the "Master" function to the remote.
2. Color Selection Ring
Directly selects color along a circular spectrum. To obtain white light only, keep the “Zone On” (|) button depressed until the light changes to a steady bright white.
3. Selection LED Indicator
Flashes once to indicate when a command has been selected.
remote
remote
4. Brightness Touch Slider - Increase(Right Side)/Decrease(Left Side)
Increases(right side) or decreases(left side) the brightness level. Changing the active mode resets the brightness level to full.
5. Mode Start/Scroll(M)
Modes feature different color combinations, light transitions, and patterns, with 9 distinct modes. This button initiates the Mode function and scrolls through the modes in ascending order.
6. Mode Speed - Increase(S+)/Decrease(S-)
Increases (S+)/decreases(S-) the tempo of the mode pattern currently active
7. Zone On(|)/Off(O) - Zones 1-4
Allows up to four “zones” (i.e. channels) of RGB(W) light strips to be separately linked and controlled by the remote. Pressing one of the Zone On(|) buttons activates that zone; commands will affect only lights in that zone. Once linked to a zone, lights remain linked until they are unlinked. Steadily depressing the Zone On(|) button restores the lights in that zone to white.
Modes List
Mode Description
1 Six Color Fade In/Out Red, Yellow, Green, Cyan, Blue and Purple fade in and out in a continuous repeating cycle.
2 White Fade In/Out White fades in and out continuously.
3 RGBW Fade In/Out Red, Green, Blue and White fade in and out in a continuous repeating cycle.
4 Seven Color Flash Red, Green, Blue, Yellow, Purple, Cyan and White cycle in set pattern with flashing transitions.
5 Disco Random Pattern Red, Green, Blue, Yellow, Purple, Cyan and White cycle at random with flashing transitions.
6 Red Fade In/Out with 3 Flashes Red increases to full brightness then flashes 3 times.
7 Green Fade In/Out with 3 Flashes Green increases to full brightness then flashes 3 times.
8 Blue Fade In/Out with 3 Flashes Blue increases to full brightness then flashes 3 times.
9 All Pattern Mode All 8 patterns above cycle through and repeat.

Set-Up Instructions
Remote
  1. Install 2 AAA batteries (not included) in the wireless remote.
Controller
  1. Make sure power to the controller is disconnected.
  2. Using a small flathead screwdriver, loosen the five clamp screws on the underside of the controller.
  3. Matching light strip wires to the labeled slots on the end of the controller, insert wires and tighten clamp screws, as shown below.
  4. Turn power on and wait until RGB(W) light strip illuminates. If no illumination occurs, check light strips and wiring connections.
  5. The RGB(W) light strip is ready for linking to the wireless remote.
Safety
  • DO NOT use with wall dimmers, relays or other control circuits.
  • DO NOT install with power applied to controller.
  • DO NOT expose the remote or controller to direct or indirect moisture.
remote
Linking Lights to Remote Zones
RGB(W) light strips are controlled exclusively by the multi-zone RF remote via the controller.
Linking a Light to a Remote
1. Switch off the main power supply to the light.
2. Restore power and within 3 seconds, choosing one of the "Zone On" (|) buttons, depress the button until the light begins flashing. It will flash white 2 times, indicating that the light is now linked to that numbered zone and can be controlled via the remote.
linking
Activating a Zone
To activate a specific zone, depress the "Zone On" (|) button. The zone is now active and remote commands will only affect lights linked to that zone.
Unlinking a Light to the Remote
  1. Determine which zone the light is linked to. This can be done by testing the Zone On/Off controls for each zone on the remote.
  2. Switch off the main power supply to the light.
  3. Restore power and within 3 seconds, depress one of the "Zone On" (|) buttons until the light flashes 10 times, indicating that the light has been unlinked.
An unlimited number of RGB(W) light strips can be linked to a zone. All the lights linked to that zone will display the commands entered on the wireless remote. Conversely, a single RGB(W) light strip can be linked to multiple remotes. When the light is unlinkedv, it will be unlinked to all remotes. Note: The wireless remote operates using radio frequency. The remote controller’s use is not restricted by normal obstructions such as walls, doors, etc. Once programmed they can be installed anywhere in range of the remote (up to 65 ft. or 20m).

Accessories & Power Supplies

  1. View all

    All Accessories

    1 additional compatible accessories

  1. View all

    Power Supplies

    39 additional compatible accessories

  1. View all

    Compatible Strips

    25 additional compatible accessories

Reviews

Write Your Own Review

Write a Review

You're reviewing: MiBoxer WiFi Smart Multi Zone RGBW Controller - 6 Amps/Channel - RGBW Controller (Receiver)

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

  • Review text does not pertain to the product
  • Abusive and offensive language
  • Photos are not related to the reviewed product
  • Any violation of laws and/or copyrighted material
  • Unrelated hyperlinks/URLs