Name: MiBoxer WiFi Smart Multi Zone RGBW Controller - 6 Amps/Channel - RGBW Controller (Receiver)
Brand: Super Bright LEDs
SKU: RGBW6-MZ
Price: 17.99 USD
Availability: InStock
Rating: 4.4 (12 reviews)

Overview

Universal Red/Green/Blue/White (RGBW) LED WiFi Compatible Controller & Dimmer with out remote. Use to control up to four separate "zones" of RGBW LED strips that will be linked and controlled by one or several wireless remotes or smartphones with the Wi-Fi LED Controller Gateway (White and RGB channels cannot be used simultaneously). Synchronization function allows a single remote to operate one or multiple controllers (User configurable). Maximum load is 6 amps per channel, 24 amps total. Must be paired with Wi-Fi LED Controller Gateway (WIFI-CON -- Sold separately) for adjusting all controller functions using a Smartphone or tablet running Android or iOS using the free MiBoxer app.

Please note: MiLight and MiBoxer are compatible smart technology brands. Products under these names are able to work interchangeably with each other.

Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.

Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a product of equal value may be substituted or a gift card for the value of the product. Read More

Applications

Home Lighting
Home Accent Lighting
Remote Controlled Light

MiBoxer Smart Ecosystem

Bring smart lighting to your home or business with the complete line of MiBoxer products. A single WiFi Hub connects to the MiBoxer app, allowing you to control groups of lights both inside and outside from the convenient location of your smartphone or tablet. MiBoxer, previously known as MiLight, has been updated with new features including voice control, and works seamlessly with all previous MiLight devices.

Control multiple lights remotely to emit thousands of color or white options. Customize the brightness, saturation, and color-changing modes. Schedule lights to turn on and off with the scheduled timer.
With the app's linking feature, you can group lights and controllers to specific zones to manage multiple devices at a time.
Third party voice capabilities allow you to control your lights hands-free, using Amazon Alexa or Google Assistant.

MiBoxer Remote Ecosystem

Use this wireless RF remote with Waterproof RGB or MiLight/MiBoxer RGB or RGBW controllers for LED strip light operation or with compatible LED smart bulbs and RGBW flood lights. Choose from thousands of color options with the touch-activated color-selection wheel, or select pure white. Control speed, brightness, and dynamic or static color modes from up to 98' away in open air. The remote also has 4 zone-control buttons for lights in different areas.

Specifications

Amps	24A
Amps Per Channel	6 Amps/CH
Channels	4 Channels
Control Type	Handheld (RF) Remote
Input Connection Type	Screw Terminals
Radio Frequency	2.4 GHz
Standards And Certifications	FCC, RoHS Compliant
Supported Smart Phone Apps	MiBoxer
Volts	12~24 VDC

Print Specifications

Installation & Features

Wireless Remote

1. Master On(-)/Off(O)
A master On(-)/Off(O) control for all zone-linked RGB(W) light strips. Also activates the “Master” function, which allows the remote to control the RGB(W) light strips of all zones. If a zone is currently active, pressing the master On(-) button restores the "Master" function to the remote.

2. Color Selection Ring
Directly selects color along a circular spectrum. To obtain white light only, keep the “Zone On” (|) button depressed until the light changes to a steady bright white.

3. Selection LED Indicator
Flashes once to indicate when a command has been selected.

4. Brightness Touch Slider - Increase(Right Side)/Decrease(Left Side)
Increases(right side) or decreases(left side) the brightness level. Changing the active mode resets the brightness level to full.

5. Mode Start/Scroll(M)
Modes feature different color combinations, light transitions, and patterns, with 9 distinct modes. This button initiates the Mode function and scrolls through the modes in ascending order.

6. Mode Speed - Increase(S+)/Decrease(S-)
Increases (S+)/decreases(S-) the tempo of the mode pattern currently active

7. Zone On(|)/Off(O) - Zones 1-4
Allows up to four “zones” (i.e. channels) of RGB(W) light strips to be separately linked and controlled by the remote. Pressing one of the Zone On(|) buttons activates that zone; commands will affect only lights in that zone. Once linked to a zone, lights remain linked until they are unlinked. Steadily depressing the Zone On(|) button restores the lights in that zone to white.

Modes List

	Mode	Description
1	Six Color Fade In/Out	Red, Yellow, Green, Cyan, Blue and Purple fade in and out in a continuous repeating cycle.
2	White Fade In/Out	White fades in and out continuously.
3	RGBW Fade In/Out	Red, Green, Blue and White fade in and out in a continuous repeating cycle.
4	Seven Color Flash	Red, Green, Blue, Yellow, Purple, Cyan and White cycle in set pattern with flashing transitions.
5	Disco Random Pattern	Red, Green, Blue, Yellow, Purple, Cyan and White cycle at random with flashing transitions.
6	Red Fade In/Out with 3 Flashes	Red increases to full brightness then flashes 3 times.
7	Green Fade In/Out with 3 Flashes	Green increases to full brightness then flashes 3 times.
8	Blue Fade In/Out with 3 Flashes	Blue increases to full brightness then flashes 3 times.
9	All Pattern Mode	All 8 patterns above cycle through and repeat.

Set-Up Instructions

Remote

Install 2 AAA batteries (not included) in the wireless remote.

Controller

Make sure power to the controller is disconnected.
Using a small flathead screwdriver, loosen the five clamp screws on the underside of the controller.
Matching light strip wires to the labeled slots on the end of the controller, insert wires and tighten clamp screws, as shown below.
Turn power on and wait until RGB(W) light strip illuminates. If no illumination occurs, check light strips and wiring connections.
The RGB(W) light strip is ready for linking to the wireless remote.

Safety

DO NOT use with wall dimmers, relays or other control circuits.
DO NOT install with power applied to controller.
DO NOT expose the remote or controller to direct or indirect moisture.

Linking Lights to Remote Zones

RGB(W) light strips are controlled exclusively by the multi-zone RF remote via the controller.

Linking a Light to a Remote
1. Switch off the main power supply to the light.
2. Restore power and within 3 seconds, choosing one of the "Zone On" (|) buttons, depress the button until the light begins flashing. It will flash white 2 times, indicating that the light is now linked to that numbered zone and can be controlled via the remote.

Activating a Zone

To activate a specific zone, depress the "Zone On" (|) button. The zone is now active and remote commands will only affect lights linked to that zone.

Unlinking a Light to the Remote

Determine which zone the light is linked to. This can be done by testing the Zone On/Off controls for each zone on the remote.
Switch off the main power supply to the light.
Restore power and within 3 seconds, depress one of the "Zone On" (|) buttons until the light flashes 10 times, indicating that the light has been unlinked.

An unlimited number of RGB(W) light strips can be linked to a zone. All the lights linked to that zone will display the commands entered on the wireless remote. Conversely, a single RGB(W) light strip can be linked to multiple remotes. When the light is unlinkedv, it will be unlinked to all remotes. Note: The wireless remote operates using radio frequency. The remote controller’s use is not restricted by normal obstructions such as walls, doors, etc. Once programmed they can be installed anywhere in range of the remote (up to 65 ft. or 20m).

Accessories & Power Supplies

All Accessories

Installation Supplies

Led Strips

Remotes

Power Supplies

Amplifiers

Controllers

Wiring

Accessories Links

Accessory Category

Accessory Type:

$14.99 ea.

RGBW-A6 RGB Amplifier - RGBW LED Amplifier Part Number: RGBW-A6
In stock

RGBW-A6 series four channel RGBW amplifier. Maximum 6 Amps per channel/24 Amps total. Increases the load capability and extends the signal of universal RGBW controllers. Required if exceeding the maximum load capability of any universal RGBW controller. 12~24VDC operation.
$6.99 ea.

MRGB-A4 Mini RGB Amplifier - Mini RGB LED Amplifier Part Number: MRGB-A4
In stock

MRGB-A4 series three channel RGB amplifier. Maximum 4 Amps per channel/12 Amps total. Used to increase the load capability and extend the signal of the universal RGB controllers. Required if exceeding the maximum load capability of any universal RGB controller. 12VDC operation. 2 x 4-pin RGB pigtail connectors included.

$39.99 ea.

MiBoxer Smartphone or Tablet Wi-Fi LED Controller Hub - Wifi Controller Part Number: WIFI-CON2
In stock

Wi-Fi gateway allows you to control any compatible LED smart bulbs or fixtures with an Apple (iOS) or Android (version 4.3 and above) smartphone or tablet. This device uses the updated MiBoxer app. The gateway must be used with Wi-Fi-compatible LED bulbs or fixtures and can also be used with an RGB, RGBW, or RGB+CCT controller to allow for control of LED strips and other LED lights. Simply plug the Wi-Fi gateway into a computer with the included USB cord or into an outlet by using a USB wall adapter, and download the free MiBoxer app on your Apple or Android device. Connect to the Wi-Fi gateway using your device's Wi-Fi settings, and use the app to sync your LED lights (see PDF instructions for details).

$0.99 per Foot

Jacketed 18 Gauge Wire - Two Conductor Power Wire - UL Listed - Type CL2 White PVC Jacketed - 18 AWG UL listed Type CL2 Part Number: WP18-CL2
In stock

UL listed type CL2 jacketed power wire for low voltage installations. Ideal for home applications. Two conductor 18 gauge 1x1 solid wire insulated in PVC jacket. Price per foot.
$0.69 per Foot

PVC Jacketed 18 Gauge Wire - Two Conductor Power Wire - Part Number: WP18-2CMR
In stock

UL listed jacketed power wire for low voltage installations. Two conductor 18 gauge stranded wire insulated in PVC jacket. Price per foot.
$0.99 per Foot

22 Gauge Wire - Five Conductor RGB+W Power Wire - RGB+W Wire Part Number: RGBW-5Wire
In stock

RGBW-5Wire peel-able 22 gauge 5 conductor power power wire. Useful for lengthening segments of RGBW LED strips and RGBW controllers. Price per foot.
$0.85 per Foot

22 Gauge Wire - Four Conductor RGB Power Wire - RGB-4Wire Part Number: RGB-4Wire
In stock

22 Gauge Wire - Four Conductor RGB Power Wire. Use for connecting and lengthening segments of RGB LED Light strips and RGB Controllers. Price per foot.
$0.39 per Foot

24 Gauge Wire - Two Conductor Power Wire - 24 AWG Part Number: WP24-2
In stock

Power Wire for low voltage installations. Parallel bonded two conductor 24 gauge 1x11 stranded wire. Price per foot.
$0.69 per Foot

Gray Jacketed 14 Gauge Wire - Two Conductor Power Wire - 14 AWG Part Number: WDRB14-2
In stock

Power Wire for low voltage installations. 14 gauge 1x19 stranded two conductor jacketed brake cable.

Reviews

Write Your Own Review

Write a Review

You're reviewing: MiBoxer WiFi Smart Multi Zone RGBW Controller - 6 Amps/Channel - RGBW Controller (Receiver)

Select Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Email Address

Summary

Review

Technical Level

Add your photo

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.